ubuntu16.04挂载新磁盘

标签：layout   delete   nod   e2fs   use   rsa   block   order   saving   

wang@ubuntu:~$

sudo fdisk -l

[sudo] password for wang: Disk /dev/loop0: 18.4 MiB, 19243008 bytes, 37584 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/loop1: 86.9 MiB, 91099136 bytes, 177928 sectors

Disk /dev/loop2: 86.6 MiB, 90812416 bytes, 177368 sectors

Disk /dev/loop3: 86.9 MiB, 91115520 bytes, 177960 sectors

Disk /dev/loop4: 18.5 MiB, 19410944 bytes, 37912 sectors

Ignoring extra data in partition table 5. Disk /dev/sda: 60 GiB, 64424509440 bytes, 125829120 sectors

Disk /dev/sdb: 20 GiB, 21474836480 bytes, 41943040 sectors

Disk /dev/sdc: 20 GiB, 21474836480 bytes, 41943040 sectors

wang@ubuntu:~$ sudo -i root@ubuntu:~#

sudo fdisk /dev/sdc

Welcome to fdisk (util-linux 2.27.1). Changes will remain in memory only, until you decide to write them. Be careful before using the write command.

Device does not contain a recognized partition table. Created a new DOS disklabel with disk identifier 0x30d8c8fe.

Command (m for help):

m

Help:

DOS (MBR)

a toggle a bootable flag

b edit nested BSD disklabel

c toggle the dos compatibility flag

Generic

d delete a partition

F list free unpartitioned space

l list known partition types

n add a new partition

p print the partition table

t change a partition type

v verify the partition table

i print information about a partition

Misc

m print this menu

u change display/entry units

x extra functionality (experts only)

Script

I load disk layout from sfdisk script file

O dump disk layout to sfdisk script file

Save & Exit

w write table to disk and exit

q quit without saving changes

Create a new label

g create a new empty GPT partition table

G create a new empty SGI (IRIX) partition table

o create a new empty DOS partition table

s create a new empty Sun partition table

Command (m for help):

n

Partition type p primary (0 primary, 0 extended, 4 free) e extended (container for logical partitions) Select (default p):

p

Partition number (1-4, default 1): First sector (2048-41943039, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (2048-41943039, default 41943039):

Created a new partition 1 of type ‘Linux‘ and of size 20 GiB.

Command (m for help):

m

Help:

DOS (MBR) a toggle a bootable flag b edit nested BSD disklabel c toggle the dos compatibility flag

Generic d delete a partition F list free unpartitioned space l list known partition types n add a new partition p print the partition table t change a partition type v verify the partition table i print information about a partition

Misc m print this menu u change display/entry units x extra functionality (experts only)

Script I load disk layout from sfdisk script file O dump disk layout to sfdisk script file

Save & Exit w write table to disk and exit q quit without saving changes

Create a new label g create a new empty GPT partition table G create a new empty SGI (IRIX) partition table o create a new empty DOS partition table s create a new empty Sun partition table

Command (m for help): w

The partition table has been altered. Calling ioctl() to re-read partition table. Syncing disks.

root@ubuntu:~# fdisk -l

Disk /dev/loop0: 18.4 MiB, 19243008 bytes, 37584 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/loop1: 86.9 MiB, 91099136 bytes, 177928 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/loop2: 86.6 MiB, 90812416 bytes, 177368 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/loop3: 86.9 MiB, 91115520 bytes, 177960 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/loop4: 18.5 MiB, 19410944 bytes, 37912 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes

Ignoring extra data in partition table 5. Disk /dev/sda: 60 GiB, 64424509440 bytes, 125829120 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x7f792d7e

Device Boot Start End Sectors Size Id Type /dev/sda1 * 2048 81788927 81786880 39G 83 Linux /dev/sda2 81790974 83884031 2093058 1022M 5 Extended /dev/sda3 81788928 81790973 2046 1023K 83 Linux /dev/sda5 81790976 83884031 2093056 1022M 82 Linux swap / Solaris

Partition table entries are not in disk order.

Disk /dev/sdb: 20 GiB, 21474836480 bytes, 41943040 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x451fa6fd

Device Boot Start End Sectors Size Id Type /dev/sdb1 2048 41943039 41940992 20G 83 Linux

Disk /dev/sdc: 20 GiB, 21474836480 bytes, 41943040 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x30d8c8fe

Device Boot Start End Sectors Size Id Type /dev/sdc1 2048 41943039 41940992 20G 83 Linux

root@ubuntu:~#

mkfs .ext3 /dev/sdc1

mke2fs 1.42.13 (17-May-2015) mkfs.ext2: invalid blocks ‘/dev/sdc1‘ on device ‘.ext3‘ root@ubuntu:~# mkfs.ext3 /dev/sdc1 mke2fs 1.42.13 (17-May-2015) Creating filesystem with 5242624 4k blocks and 1310720 inodes Filesystem UUID: 766c2620-d366-460d-b7ec-3a799ae9be49 Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000

Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done

root@ubuntu:~#

sudo vim /etc/fstab

# /etc/fstab: static file system information.
#
# Use ‘blkid‘ to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=9cfc41d5-32f9-4d9f-a69c-1f4ae6a923c2 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=e4262916-28f9-4d52-8509-78ae291e15d8 none            swap    sw              0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
/dev/sdc1       /eos_private    ext3    defaults                 0       0
/dev/sdb1       /eth_private    ext3    defaults                 0       0

[No write since last change] /bin/bash: q: command not found

shell returned 127

Press ENTER or type command to continue [No write since last change] /bin/bash: q: command not found

shell returned 127

ubuntu16.04挂载新磁盘

标签：layout   delete   nod   e2fs   use   rsa   block   order   saving   

原文地址：https://www.cnblogs.com/ximen/p/9272305.html