码迷,mamicode.com
首页 > 编程语言 > 详细

Spring_总结_03_装配Bean之自动装配

时间:2018-07-27 23:17:05      阅读:348      评论:0      收藏:0      [点我收藏+]

标签:proc   line   配置   bootstrap   setting   use   The   ssl   sign   

一、前言

本文承接上一节:Spring_总结_02_依赖注入

在上一节我们了解到依赖注入的实质就是装配。

这一节我们来学习下装配Bean的相关知识。

 

二、Bean的装配机制

1.三种装配机制

Spring提供了三种主要的bean的装配机制:

(1)隐式的bean发现机制和自动装配

(2)在Java中进行显示配置

(3)在XML中进行显示配置

 

2.如何选择

(1)第一考虑自动装配,显示配置越少越好。

(2)当必须要显示配置的时候,再使用类型安全并且比XML更强大的JavaConfig

(3)最后,只有当你想用使用便利的XML命名空间,并且在JavaConfig中没有同样的实现时,才应该使用XML。

 

这里以一个小例子来阐述组件扫描和装配。创建CompactDisc类,Spring会发现它并为其创建一个bean。然后,创建一个CDPlayer类,Spring会发现它,并将CompactDisc bean注入进来。

 

二、自动装配的过程

Spring从两个角度来实现自动化装配:

(1)组件扫描(component scanning):Spring 会自动发现应用上下文中所创建的bean

(2)自动装配(autowiring):Spring 自动满足bean之间的依赖

 

实现自动装配的过程如下:

    (1)启用组件扫描: @ComponentScan

    (2)声明bean      :  @Component

      (3)  自动装配bean : @Autowired

 

三、启用组件扫描

组件扫描默认是不开启的,我们需要显示配置一下Spring,从而让它寻找带有@Component注解的类,并为其创建Bean。

 

配置类 CDPlayerConfig

@Configuration   //1
@ComponentScan   //2
public class CDPlayerConfig {
}

 

1. 默认扫描包

1处:声明这是一个配置类

2处:开启组件扫描。默认会扫描配置类所在同级包及其子包,查找带有@Component注解的类。

 

2. 设置组件扫描的基础包

ComponentScan源码:

技术分享图片
/*
 * Copyright 2002-2016 the original author or authors.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package org.springframework.context.annotation;

import java.lang.annotation.Documented;
import java.lang.annotation.ElementType;
import java.lang.annotation.Repeatable;
import java.lang.annotation.Retention;
import java.lang.annotation.RetentionPolicy;
import java.lang.annotation.Target;

import org.springframework.beans.factory.support.BeanNameGenerator;
import org.springframework.core.annotation.AliasFor;
import org.springframework.core.type.filter.TypeFilter;

/**
 * Configures component scanning directives for use with @{@link Configuration} classes.
 * Provides support parallel with Spring XML‘s {@code <context:component-scan>} element.
 *
 * <p>Either {@link #basePackageClasses} or {@link #basePackages} (or its alias
 * {@link #value}) may be specified to define specific packages to scan. If specific
 * packages are not defined, scanning will occur from the package of the
 * class that declares this annotation.
 *
 * <p>Note that the {@code <context:component-scan>} element has an
 * {@code annotation-config} attribute; however, this annotation does not. This is because
 * in almost all cases when using {@code @ComponentScan}, default annotation config
 * processing (e.g. processing {@code @Autowired} and friends) is assumed. Furthermore,
 * when using {@link AnnotationConfigApplicationContext}, annotation config processors are
 * always registered, meaning that any attempt to disable them at the
 * {@code @ComponentScan} level would be ignored.
 *
 * <p>See {@link Configuration @Configuration}‘s Javadoc for usage examples.
 *
 * @author Chris Beams
 * @author Juergen Hoeller
 * @author Sam Brannen
 * @since 3.1
 * @see Configuration
 */
@Retention(RetentionPolicy.RUNTIME)
@Target(ElementType.TYPE)
@Documented
@Repeatable(ComponentScans.class)
public @interface ComponentScan {

    /**
     * Alias for {@link #basePackages}.
     * <p>Allows for more concise annotation declarations if no other attributes
     * are needed &mdash; for example, {@code @ComponentScan("org.my.pkg")}
     * instead of {@code @ComponentScan(basePackages = "org.my.pkg")}.
     */
    @AliasFor("basePackages")
    String[] value() default {};

    /**
     * Base packages to scan for annotated components.
     * <p>{@link #value} is an alias for (and mutually exclusive with) this
     * attribute.
     * <p>Use {@link #basePackageClasses} for a type-safe alternative to
     * String-based package names.
     */
    @AliasFor("value")
    String[] basePackages() default {};

    /**
     * Type-safe alternative to {@link #basePackages} for specifying the packages
     * to scan for annotated components. The package of each class specified will be scanned.
     * <p>Consider creating a special no-op marker class or interface in each package
     * that serves no purpose other than being referenced by this attribute.
     */
    Class<?>[] basePackageClasses() default {};

    /**
     * The {@link BeanNameGenerator} class to be used for naming detected components
     * within the Spring container.
     * <p>The default value of the {@link BeanNameGenerator} interface itself indicates
     * that the scanner used to process this {@code @ComponentScan} annotation should
     * use its inherited bean name generator, e.g. the default
     * {@link AnnotationBeanNameGenerator} or any custom instance supplied to the
     * application context at bootstrap time.
     * @see AnnotationConfigApplicationContext#setBeanNameGenerator(BeanNameGenerator)
     */
    Class<? extends BeanNameGenerator> nameGenerator() default BeanNameGenerator.class;

    /**
     * The {@link ScopeMetadataResolver} to be used for resolving the scope of detected components.
     */
    Class<? extends ScopeMetadataResolver> scopeResolver() default AnnotationScopeMetadataResolver.class;

    /**
     * Indicates whether proxies should be generated for detected components, which may be
     * necessary when using scopes in a proxy-style fashion.
     * <p>The default is defer to the default behavior of the component scanner used to
     * execute the actual scan.
     * <p>Note that setting this attribute overrides any value set for {@link #scopeResolver}.
     * @see ClassPathBeanDefinitionScanner#setScopedProxyMode(ScopedProxyMode)
     */
    ScopedProxyMode scopedProxy() default ScopedProxyMode.DEFAULT;

    /**
     * Controls the class files eligible for component detection.
     * <p>Consider use of {@link #includeFilters} and {@link #excludeFilters}
     * for a more flexible approach.
     */
    String resourcePattern() default ClassPathScanningCandidateComponentProvider.DEFAULT_RESOURCE_PATTERN;

    /**
     * Indicates whether automatic detection of classes annotated with {@code @Component}
     * {@code @Repository}, {@code @Service}, or {@code @Controller} should be enabled.
     */
    boolean useDefaultFilters() default true;

    /**
     * Specifies which types are eligible for component scanning.
     * <p>Further narrows the set of candidate components from everything in {@link #basePackages}
     * to everything in the base packages that matches the given filter or filters.
     * <p>Note that these filters will be applied in addition to the default filters, if specified.
     * Any type under the specified base packages which matches a given filter will be included,
     * even if it does not match the default filters (i.e. is not annotated with {@code @Component}).
     * @see #resourcePattern()
     * @see #useDefaultFilters()
     */
    Filter[] includeFilters() default {};

    /**
     * Specifies which types are not eligible for component scanning.
     * @see #resourcePattern
     */
    Filter[] excludeFilters() default {};

    /**
     * Specify whether scanned beans should be registered for lazy initialization.
     * <p>Default is {@code false}; switch this to {@code true} when desired.
     * @since 4.1
     */
    boolean lazyInit() default false;


    /**
     * Declares the type filter to be used as an {@linkplain ComponentScan#includeFilters
     * include filter} or {@linkplain ComponentScan#excludeFilters exclude filter}.
     */
    @Retention(RetentionPolicy.RUNTIME)
    @Target({})
    @interface Filter {

        /**
         * The type of filter to use.
         * <p>Default is {@link FilterType#ANNOTATION}.
         * @see #classes
         * @see #pattern
         */
        FilterType type() default FilterType.ANNOTATION;

        /**
         * Alias for {@link #classes}.
         * @see #classes
         */
        @AliasFor("classes")
        Class<?>[] value() default {};

        /**
         * The class or classes to use as the filter.
         * <p>The following table explains how the classes will be interpreted
         * based on the configured value of the {@link #type} attribute.
         * <table border="1">
         * <tr><th>{@code FilterType}</th><th>Class Interpreted As</th></tr>
         * <tr><td>{@link FilterType#ANNOTATION ANNOTATION}</td>
         * <td>the annotation itself</td></tr>
         * <tr><td>{@link FilterType#ASSIGNABLE_TYPE ASSIGNABLE_TYPE}</td>
         * <td>the type that detected components should be assignable to</td></tr>
         * <tr><td>{@link FilterType#CUSTOM CUSTOM}</td>
         * <td>an implementation of {@link TypeFilter}</td></tr>
         * </table>
         * <p>When multiple classes are specified, <em>OR</em> logic is applied
         * &mdash; for example, "include types annotated with {@code @Foo} OR {@code @Bar}".
         * <p>Custom {@link TypeFilter TypeFilters} may optionally implement any of the
         * following {@link org.springframework.beans.factory.Aware Aware} interfaces, and
         * their respective methods will be called prior to {@link TypeFilter#match match}:
         * <ul>
         * <li>{@link org.springframework.context.EnvironmentAware EnvironmentAware}</li>
         * <li>{@link org.springframework.beans.factory.BeanFactoryAware BeanFactoryAware}
         * <li>{@link org.springframework.beans.factory.BeanClassLoaderAware BeanClassLoaderAware}
         * <li>{@link org.springframework.context.ResourceLoaderAware ResourceLoaderAware}
         * </ul>
         * <p>Specifying zero classes is permitted but will have no effect on component
         * scanning.
         * @since 4.2
         * @see #value
         * @see #type
         */
        @AliasFor("value")
        Class<?>[] classes() default {};

        /**
         * The pattern (or patterns) to use for the filter, as an alternative
         * to specifying a Class {@link #value}.
         * <p>If {@link #type} is set to {@link FilterType#ASPECTJ ASPECTJ},
         * this is an AspectJ type pattern expression. If {@link #type} is
         * set to {@link FilterType#REGEX REGEX}, this is a regex pattern
         * for the fully-qualified class names to match.
         * @see #type
         * @see #classes
         */
        String[] pattern() default {};

    }

}
View Code

其中,通过 basePackages 可用String类型来指定基础包。

           通过 basePackageClasses 可用类或接口(建议使用空标记接口)来指定基础包,这些类或接口所在的包将会作为组件扫描的基础包。

 

示例如下:

技术分享图片
@Configuration
@ComponentScan(basePackages = "com.ray.soundsystem")
public class CDPlayerConfig {
}


@Configuration
@ComponentScan(basePackages = {"com.ray.soundsystem","com.ray.video"})
public class CDPlayerConfig {
}
View Code

 

技术分享图片
public interface SoundSystemScanConfig {
    
}

public interface VideoScanConfig {

}

@Configuration
@ComponentScan(basePackageClasses = {SoundSystemScanConfig.class,VideoScanConfig.class})
public class CDPlayerConfig {
}
View Code

 

 

四、声明bean

1.  @Component声明bean

技术分享图片
@Component
public class ComPactDisc {
    
    public void play(){
        System.out.println("play music");
    }
}
View Code

 

如上述代码所示,通过@Component来声明一个组件,表明该类会作为组件类,并告知Spring要为这个类创建bean。

可用以下注解来声明一个组件:

  • @Component  : 标注通用组件
  • @Controller     : 标注控制器
  • @Service        :  标注Service
  • @Respository :  标注数据访问层

通过查看源码,可知,@Controller、@Service、@Repository 能声明bean 是因为他们都组合了@Component。

以Controller为例:

@Target({ElementType.TYPE})
@Retention(RetentionPolicy.RUNTIME)
@Documented
@Component
public @interface Controller

 

2.为组件命名

Spring 会为所有的bean都指定一个ID,默认为类名首字母小写。

但也可通过@Component的value属性来将为bean命名,如:

技术分享图片
@Component("compactDisc1")
public class ComPactDisc {

    public void play(){
        System.out.println("play music");
    }
}
View Code

 

 

五、自动装配bean

技术分享图片
public class CDPlayer {
    
    private ComPactDisc cd;
    
    
    @Autowired
    public CDPlayer( ComPactDisc cd){
        this.cd =cd;
    }
    
    public  void play(){
        cd.play();
    }
}
View Code

 

(1)通过 @Autowired 注解,声明让Spring来自动注入符合要求的bean

(2)@Autowired 注解可用在属性上以及任何方法上

(3)当@Autowired 注解用在方法上时,Spring会尝试满足方法参数上所声明的依赖。假如有且只有一个bean匹配依赖需求,那么这个bean将会被装配进来。

 

Spring_总结_03_装配Bean之自动装配

标签:proc   line   配置   bootstrap   setting   use   The   ssl   sign   

原文地址:https://www.cnblogs.com/shirui/p/9379975.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!