标签：数据 state table http adl 密码 编译 scan 测试
环境说明| ip | 需要安装的程序 |
|---|---|
| 192.168.209.12 | nginx mysql php |
*lnmp架构的安装的顺序*
①安装nginx
②安装mysql
③安装php
④最后配置nginx和创建php测试程序
⑤验证
*******************①安装nginx***********************
1.//创建系统用户nginx
[root@lanzhiyong ~]# useradd -r -M -s /sbin/nologin nginx
//安装依赖环境
[root@lanzhiyong ~]# yum -y install pcre-devel openssl openssl-devel gd-devel
[root@lanzhiyong ~]# yum install -y gd-devel-2.0.35-26.el7.x86_64.rpm
[root@lanzhiyong ~]# yum -y groups mark install ‘Development Tools‘
//创建日志存放目录
[root@lanzhiyong ~]# mkdir -p /var/log/nginx
[root@lanzhiyong ~]# chown -R nginx.nginx /var/log/nginx
//下载nginx
[root@lanzhiyong ~]# cd /usr/src/
[root@lanzhiyong src]# wgethttp://nginx.org/download/nginx-1.14.0.tar.gz
//编译安装
[root@lanzhiyong src]# tar xf nginx-1.14.0.tar.gz
[root@lanzhiyong src]# cd nginx-1.14.0[root@lanzhiyong nginx-1.14.0]# ./configure --prefix=/usr/local/nginx --user=nginx --group=nginx --with-debug --with-http_ssl_module --with-http_realip_module --with-http_image_filter_module --with-http_gunzip_module --with-http_gzip_static_module --with-http_stub_status_module --http-log-path=/var/log/nginx/access.log --error-log-path=/var/log/nginx/error.log
[root@lanzhiyong nginx-1.14.0]# make -j $(grep ‘processor‘ /proc/cpuinfo | wc -l) && make install
2.nginx安装后配置
//配置环境变量
[root@lanzhiyong ~]# echo ‘export PATH=/usr/local/nginx/sbin:$PATH‘ > /etc/profile.d/nginx.sh
[root@lanzhiyong ~]# source /etc/profile.d/nginx.sh
[root@lanzhiyong ~]# nginx
[root@lanzhiyong ~]# ss -antl
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 128 *:80 *:*
LISTEN 0 128 *:22 *:*
LISTEN 0 100 127.0.0.1:25 *:*
LISTEN 0 128 :::22 :::*
LISTEN 0 100 ::1:25 :::* ***********************②安装mysql**************************
//安装依赖 包
[root@lanzhiyong ~]# yum -y install ncurses-devel openssl-devel openssl cmake mariadb-devel
//创建用户和组
[root@lanzhiyong ~]# cd /usr/src/
[root@lanzhiyong src]# groupadd -r -g 306 mysql
[root@lanzhiyong src]# useradd -M -s /sbin/nologin -g 306 -u 306 mysql
//下载二进制格式的mysql软件包[root@lanzhiyong src]# wget https://downloads.mysql.com/archives/get/file/mysql-5.7.22-linux-glibc2.12-x86_64.tar.gz
//解压软件至/usr/local
[root@lanzhiyong src]# tar xf mysql-5.7.22-linux-glibc2.12-x86_64.tar.gz -C /usr/local/
[root@lanzhiyong src]# cd /usr/local/
//创建软连接
[root@lanzhiyong local]# ln -sv mysql-5.7.22-linux-glibc2.12-x86_64/ mysql
//修改目录/usr/local/mysql的属主属组
[root@lanzhiyong local]# chown -R mysql.mysql /usr/local/mysql
[root@lanzhiyong local]# ll /usr/local/mysql
//添加环境变量
[root@lanzhiyong ~]# ls /usr/local/mysql
[root@lanzhiyong ~]# echo ‘export PATH=/usr/local/mysql/bin:$PATH‘ > /etc/profile.d/mysql.sh
[root@lanzhiyong ~]# source /etc/profile.d/mysql.sh
[root@lanzhiyong ~]# echo $PATH
//建立数据存放目录
[root@lanzhiyong ~]# mkdir /opt/data
[root@lanzhiyong ~]# chown -R mysql.mysql /opt/data/
[root@lanzhiyong ~]# ll /opt/
总用量 0
drwxr-xr-x. 2 mysql mysql 6 8月 19 13:20 data
//初始化数据库 注意这个命令后会生成临时密码 要记住 jd?ajfrKY4pQ
[root@lanzhiyong ~]# /usr/local/mysql/bin/mysqld --initialize --user=mysql --datadir=/opt/data/
//配置mysql
//软连接
[root@lanzhiyong ~]# ln -sv /usr/local/mysql/include/ /usr/local/include/mysql
[root@lanzhiyong ~]# echo ‘/usr/local/mysql/lib‘ > /etc/ld.so.conf.d/mysql.conf
[root@lanzhiyong ~]# ldconfig -v
//生成配置文件
[root@lanzhiyong ~]# cat > /etc/my.cnf << EOF
> [mysqld]
> basedir = /usr/local/mysql
> datadir = /opt/data
> socket = /tmp/mysql.sock
> port = 3306
> pid-file = /opt/data/mysql.pid
> user = mysql
> skip-name-resolve
> EOF
//配置服务启动脚本
[root@lanzhiyong ~]# cp -a /usr/local/mysql/support-files/mysql.server /etc/init.d/mysqld
[root@lanzhiyong ~]# sed -ri ‘s#^(basedir=).*#\1/usr/local/mysql#g‘ /etc/init.d/mysqld
[root@lanzhiyong ~]# sed -ri ‘s#^(datadir=).*#\1/opt/data#g‘ /etc/init.d/mysqld
//启动mysql
[root@lanzhiyong ~]# service mysqld start
[root@lanzhiyong ~]# ps -ef |grep mysql
[root@lanzhiyong ~]# ss -antl
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 128 *:80 *:*
LISTEN 0 128 *:22 *:*
LISTEN 0 100 127.0.0.1:25 *:*
LISTEN 0 128 :::22 :::*
LISTEN 0 100 ::1:25 :::*
LISTEN 0 80 :::3306 :::*
//修改密码 使用临时密码登入
[root@lanzhiyong ~]# mysql -uroot -p
jd?ajfrKY4pQ 这是以上步骤的临时密码
mysql> set password = password(‘lanzhiyong‘);****************************③安装php*************************
3.安装php
//配置yum源
[root@lanzhiyong ~]# cd /etc/yum.repos.d/
[root@lanzhiyong yum.repos.d]# wget http://mirrors.163.com/.help/CentOS7-Base-163.repo
[root@lanzhiyong ~]# sed -i ‘s/\$releasever/7/g‘ /etc/yum.repos.d/CentOS7-Base-163.repo
[root@lanzhiyong ~]# sed -i ‘s/^enabled=.*/enabled=1/g‘ /etc/yum.repos.d/CentOS7-Base-163.repo
[root@lanzhiyong ~]# yum install -y epel-release//安装依赖包
[root@lanzhiyong ~]# yum -y install libxml2 libxml2-devel openssl openssl-devel bzip2 bzip2-devel libcurl libcurl-devel libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel gmp gmp-devel libmcrypt libmcrypt-devel readline readline-devel libxslt libxslt-devel mhash mhash-devel
//下载php
[root@lanzhiyong ~]# cd /usr/src/
[root@lanzhiyong src]# wget http://cn.php.net/distributions/php-7.2.8.tar.xz
//编译安装php
[root@lanzhiyong src]# tar xf php-7.2.8.tar.xz
[root@lanzhiyong src]# cd php-7.2.8
[root@lanzhiyong php-7.2.8]#
./configure --prefix=/usr/local/php7 --with-curl --with-freetype-dir --with-gd --with-gettext --with-iconv-dir --with-kerberos --with-libdir=lib64 --with-libxml-dir=/usr --with-mysqli=/usr/local/mysql/bin/mysql_config --with-openssl --with-pcre-regex --with-pdo-mysql --with-pdo-sqlite --with-pear --with-jpeg-dir --with-png-dir --with-xmlrpc --with-xsl --with-zlib --with-config-file-path=/etc --with-config-file-scan-dir=/etc/php.d --with-bz2 --enable-fpm --enable-bcmath --enable-libxml --enable-inline-optimization --enable-mbregex --enable-mbstring --enable-opcache --enable-pcntl --enable-shmop --enable-soap --enable-sockets --enable-sysvsem --enable-xml --enable-zip
[root@lanzhiyong php-7.2.8]# make -j $(cat /proc/cpuinfo |grep processor |wc -l)
[root@lanzhiyong php-7.2.8]# make install
//安装后配置
[root@lanzhiyong ~]# echo ‘export PATH=/usr/local/php7/bin:$PATH‘ > /etc/profile.d/php7.sh
[root@lanzhiyong ~]# source /etc/profile.d/php7.sh
[root@lanzhiyong ~]# cd /usr/src/php-7.2.8
[root@lanzhiyong php-7.2.8]# which php
/usr/local/php7/bin/php
[root@lanzhiyong php-7.2.8]# php -v
//配置php-fpm
[root@lanzhiyong php-7.2.8]# cp php.ini-production /etc/php.ini
[root@lanzhiyong php-7.2.8]# cp sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm
[root@lanzhiyong php-7.2.8]# chmod +x /etc/rc.d/init.d/php-fpm
[root@lanzhiyong php-7.2.8]# cp /usr/local/php7/etc/php-fpm.conf.default /usr/local/php7/etc/php-fpm.conf[root@lanzhiyong php-7.2.8]# cp /usr/local/php7/etc/php-fpm.d/www.conf.default /usr/local/php7/etc/php-fpm.d/www.conf
//配置fpm的相关选项为你所需的值：
[root@lanzhiyong ~]# vim /usr/local/php7/etc/php-fpm.conf
*****在配置文件最后面添加一下内容
pm.max_children = 50
pm.start_servers = 5
pm.min_spare_servers = 2
pm.max_spare_servers = 8
[root@lanzhiyong ~]# tail /usr/local/php7/etc/php-fpm.conf
//启动php-fpm
[root@lanzhiyong ~]# service php-fpm start
Starting php-fpm done
[root@lanzhiyong ~]# ss -antl
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 128 *:80 *:*
LISTEN 0 128 *:22 *:*
LISTEN 0 100 127.0.0.1:25 *:*
LISTEN 0 128 127.0.0.1:9000 *:*
LISTEN 0 128 :::22 :::*
LISTEN 0 100 ::1:25 :::*
LISTEN 0 80 :::3306 :::*
[root@lanzhiyong ~]# ps -ef |grep php*******************④最后配置nginx和创建php测试程序****************************//nginx配置文件/usr/local/nginx/conf/nginx.conf,只要修改配置文件中的server{ } 配置块中的内容，修改location块，追加index.php让nginx服务器默认支持index.php为首页
[root@lanzhiyong ~]# vim /usr/local/nginx/conf/nginx.conf
…………………………………………
server {
listen 80;
server_name localhost;
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
root html;
index index.html index.htm//后面添加 index.php;
}
…… ……………………………………
#pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
location ~ \.php$ {
root html;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
#fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
#主要修改的就是fastcgi_param中的/scripts为$document_root
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
#deny access to .htaccess files, if Apache‘s document root
//修改配置文件后重新加载nginx
[root@lanzhiyong ~]# /usr/local/nginx/sbin/nginx -s reload
//创建测试php程序，在/usr/local/nginx/html/test.php,打印一下php配置
[root@lanzhiyong ~]# cat > /usr/local/nginx/html/test.php << EOF
> ?php
> phpinfo();
> ?>
> EOF ***********************⑤验证******************************
最后打开浏览器输入 192.168.209.12/test.php 看到输出的页面，说明nginx和php都配置成功了
标签：数据 state table http adl 密码 编译 scan 测试
原文地址：http://blog.51cto.com/13833047/2164047
