在说数据库分表之前，先随便聊聊Zabbix的一些参数的优化吧，其实我也不是很懂，只是机器上了1500+，楞着头皮去调一下参数
首先是几个Poller的调整：
### Option: StartPollers （处理监控项的东西）
### Option: StartIPMIPollers （母鸡干什么用的，暂时没用，设为0）
### Option: StartPollersUnreachable （获取数据遇到不可到达时，交给这些进程处理）
### Option: StartHTTPPollers （监控HTTP，WEB那些东西用的，没用，设为0）
### Option: StartJavaPollers （监控JAVA专用进程，为毛就只有JAVA）
### Option: StartProxyPollers （处理代理的进程，暂时没用，设为0）
### Option: StartDiscoverers （处理自动发现的，没用，设为0）
### Option: StartPingers （如果用了ICMP PING那个模板的，这个值要调大一些）
把几个没用到的先关掉：StartHTTPPollers StartJavaPollers StartProxyPollers，设为0就可以了，然后可以观察ZabbixServer的图形来调整StartPollers和StartPollersUnreachable的数量：
要注意的是，例如StartPollers，虽然配置文件写是可用范围是0-1000，但这个1000是所有的进程的值，也就是说上面那些进程的总数不能超过1000，设的时候要注意一下这点。
关于Cache的调整：
### Option: CacheSize
### Option: CacheUpdateFrequency
### Option: HistoryCacheSize
### Option: TrendCacheSize
### Option: HistoryTextCacheSize
### Option: ValueCacheSize
关于内存的参数有这么多，都是要根据机器数量和item数量的增加而增加，这些内存的值不能大于系统内核的kernel.shmall这个值，否则申请不了内存程序启动不了
如果日志出现连续一大片地出现这些信息：
Zabbix agent item "vfs.fs.size[/boot,free]" on host "192.168.1.100" failed: first network error, wait for 15 seconds
resuming Zabbix agent checks on host "192.168.1.100": connection restored
说明你的poller不够，需要再加大poller，如果加大poller还是这样则需要减少监控的item，或者用proxy来做分布式监控了
机器数量多的时候，mysql里面的history表就会越来越大，虽然zabbix本身有删除功能（就是那个housekeeper的功能），但这东西太影响性能，所以网上的做法都是关闭这个东西，用mysql的表分区功能来实现清理历史数据还可以提升mysql的性能
一、先修改两张表的结构：
Alter table history_text drop primary key, add index (id), drop index history_text_2, add index history_text_2 (itemid, id)
Alter table history_log drop primary key, add index (id), drop index history_log_2, add index history_log_2 (itemid, id);
二、导入存储过程：
DELIMITER $$CREATE PROCEDURE `partition_create`(SCHEMANAME VARCHAR(64), TABLENAME VARCHAR(64), PARTITIONNAME VARCHAR(64), CLOCK INT)BEGIN
/*
SCHEMANAME = The DB schema in which to make changes
TABLENAME = The table with partitions to potentially delete
PARTITIONNAME = The name of the partition to create
*/
/*
Verify that the partition does not already exist
*/ DECLARE RETROWS INT; SELECT COUNT(1) INTO RETROWS FROM information_schema.partitions WHERE table_schema = SCHEMANAME AND TABLE_NAME = TABLENAME AND partition_name = PARTITIONNAME;
IF RETROWS = 0 THEN
/*
1. Print a message indicating that a partition was created.
2. Create the SQL to create the partition.
3. Execute the SQL from #2.
*/
SELECT CONCAT( "partition_create(", SCHEMANAME, ",", TABLENAME, ",", PARTITIONNAME, ",", CLOCK, ")" ) AS msg; SET @SQL = CONCAT( ‘ALTER TABLE ‘, SCHEMANAME, ‘.‘, TABLENAME, ‘ ADD PARTITION (PARTITION ‘, PARTITIONNAME, ‘ VALUES LESS THAN (‘, CLOCK, ‘));‘ ); PREPARE STMT FROM @SQL; EXECUTE STMT;
DEALLOCATE PREPARE STMT; END IF;END$$
DELIMITER ;DELIMITER $$CREATE PROCEDURE `partition_drop`(SCHEMANAME VARCHAR(64), TABLENAME VARCHAR(64), DELETE_BELOW_PARTITION_DATE BIGINT)BEGIN
/*
SCHEMANAME = The DB schema in which to make changes
TABLENAME = The table with partitions to potentially delete
DELETE_BELOW_PARTITION_DATE = Delete any partitions with names that are dates older than this one (yyyy-mm-dd)
*/
DECLARE done INT DEFAULT FALSE; DECLARE drop_part_name VARCHAR(16);
/*
Get a list of all the partitions that are older than the date
in DELETE_BELOW_PARTITION_DATE. All partitions are prefixed with
a "p", so use SUBSTRING TO get rid of that character.
*/
DECLARE myCursor CURSOR FOR
SELECT partition_name FROM information_schema.partitions WHERE table_schema = SCHEMANAME AND TABLE_NAME = TABLENAME AND CAST(SUBSTRING(partition_name FROM 2) AS UNSIGNED) < DELETE_BELOW_PARTITION_DATE; DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = TRUE;
/*
Create the basics for when we need to drop the partition. Also, create
@drop_partitions to hold a comma-delimited list of all partitions that
should be deleted.
*/
SET @alter_header = CONCAT("ALTER TABLE ", SCHEMANAME, ".", TABLENAME, " DROP PARTITION "); SET @drop_partitions = "";
/*
Start looping through all the partitions that are too old.
*/
OPEN myCursor;
read_loop: LOOP
FETCH myCursor INTO drop_part_name; IF done THEN
LEAVE read_loop; END IF; SET @drop_partitions = IF(@drop_partitions = "", drop_part_name, CONCAT(@drop_partitions, ",", drop_part_name)); END LOOP; IF @drop_partitions != "" THEN
/*
1. Build the SQL to drop all the necessary partitions.
2. Run the SQL to drop the partitions.
3. Print out the table partitions that were deleted.
*/
SET @full_sql = CONCAT(@alter_header, @drop_partitions, ";"); PREPARE STMT FROM @full_sql; EXECUTE STMT;
DEALLOCATE PREPARE STMT;
SELECT CONCAT(SCHEMANAME, ".", TABLENAME) AS `table`, @drop_partitions AS `partitions_deleted`; ELSE
/*
No partitions are being deleted, so print out "N/A" (Not applicable) to indicate
that no changes were made.
*/
SELECT CONCAT(SCHEMANAME, ".", TABLENAME) AS `table`, "N/A" AS `partitions_deleted`; END IF;END$$
DELIMITER ;DELIMITER $$CREATE PROCEDURE `partition_maintenance`(SCHEMA_NAME VARCHAR(32), TABLE_NAME VARCHAR(32), KEEP_DATA_DAYS INT, HOURLY_INTERVAL INT, CREATE_NEXT_INTERVALS INT)BEGIN DECLARE OLDER_THAN_PARTITION_DATE VARCHAR(16); DECLARE PARTITION_NAME VARCHAR(16); DECLARE LESS_THAN_TIMESTAMP INT; DECLARE CUR_TIME INT; CALL partition_verify(SCHEMA_NAME, TABLE_NAME, HOURLY_INTERVAL); SET CUR_TIME = UNIX_TIMESTAMP(DATE_FORMAT(NOW(), ‘%Y-%m-%d 00:00:00‘)); IF DATE(NOW()) = ‘2014-04-01‘ THEN SET CUR_TIME = UNIX_TIMESTAMP(DATE_FORMAT(DATE_ADD(NOW(), INTERVAL 1 DAY), ‘%Y-%m-%d 00:00:00‘)); END IF; SET @__interval = 1; create_loop: LOOP IF @__interval > CREATE_NEXT_INTERVALS THEN LEAVE create_loop; END IF; SET LESS_THAN_TIMESTAMP = CUR_TIME + (HOURLY_INTERVAL * @__interval * 3600); SET PARTITION_NAME = FROM_UNIXTIME(CUR_TIME + HOURLY_INTERVAL * (@__interval - 1) * 3600, ‘p%Y%m%d%H00‘); CALL partition_create(SCHEMA_NAME, TABLE_NAME, PARTITION_NAME, LESS_THAN_TIMESTAMP); SET @__interval=@__interval+1; END LOOP; SET OLDER_THAN_PARTITION_DATE=DATE_FORMAT(DATE_SUB(NOW(), INTERVAL KEEP_DATA_DAYS DAY), ‘%Y%m%d0000‘); CALL partition_drop(SCHEMA_NAME, TABLE_NAME, OLDER_THAN_PARTITION_DATE); END$$ DELIMITER ;
DELIMITER $$CREATE PROCEDURE `partition_verify`(SCHEMANAME VARCHAR(64), TABLENAME VARCHAR(64), HOURLYINTERVAL INT(11))BEGIN
DECLARE PARTITION_NAME VARCHAR(16); DECLARE RETROWS INT(11); DECLARE FUTURE_TIMESTAMP TIMESTAMP;
/*
* Check if any partitions exist for the given SCHEMANAME.TABLENAME.
*/
SELECT COUNT(1) INTO RETROWS FROM information_schema.partitions WHERE table_schema = SCHEMANAME AND TABLE_NAME = TABLENAME AND partition_name IS NULL;
/*
* If partitions do not exist, go ahead and partition the table
*/
IF RETROWS = 1 THEN
/*
* Take the current date at 00:00:00 and add HOURLYINTERVAL to it. This is the timestamp below which we will store values.
* We begin partitioning based on the beginning of a day. This is because we don‘t want to generate a random partition
* that won‘t necessarily fall in line with the desired partition naming (ie: if the hour interval is 24 hours, we could
* end up creating a partition now named "p201403270600" when all other partitions will be like "p201403280000").
*/
SET FUTURE_TIMESTAMP = TIMESTAMPADD(HOUR, HOURLYINTERVAL, CONCAT(CURDATE(), " ", ‘00:00:00‘)); SET PARTITION_NAME = DATE_FORMAT(CURDATE(), ‘p%Y%m%d%H00‘);
-- Create the partitioning query
SET @__PARTITION_SQL = CONCAT("ALTER TABLE ", SCHEMANAME, ".", TABLENAME, " PARTITION BY RANGE(`clock`)"); SET @__PARTITION_SQL = CONCAT(@__PARTITION_SQL, "(PARTITION ", PARTITION_NAME, " VALUES LESS THAN (", UNIX_TIMESTAMP(FUTURE_TIMESTAMP), "));");
-- Run the partitioning query
PREPARE STMT FROM @__PARTITION_SQL; EXECUTE STMT;
DEALLOCATE PREPARE STMT; END IF;END$$
DELIMITER ;可以将这四个存储过程写成一个SQL文件直接导入：
/usr/local/mysql/bin/mysql -uroot -p‘123456‘ zabbix < partition_call.sql
三、使用存储过程：
mysql> CALL partition_maintenance(‘<zabbix_db_name>‘, ‘<table_name>‘, <days_to_keep_data>, <hourly_interval>, <num_future_intervals_to_create>)
例（不要急着直接执行，后面统一运行）：
mysql> CALL partition_maintenance(‘zabbix‘, ‘history‘, 7, 24, 7);
zabbix_db_name：库名
table_name：表名
days_to_keep_data：保存多少天的数据
hourly_interval：每隔多久生成一个分区
num_future_intervals_to_create：本次一共生成多少个分区
这个例子就是history表最多保存7天的数据，每隔24小时生成一个分区，这次一共生成7个分区
下面这个存储过程就是统一调用：
DELIMITER $$ CREATE PROCEDURE `partition_maintenance_all`(SCHEMA_NAME VARCHAR(32)) BEGIN CALL partition_maintenance(SCHEMA_NAME, ‘history‘, 28, 24, 14); CALL partition_maintenance(SCHEMA_NAME, ‘history_log‘, 28, 24, 14); CALL partition_maintenance(SCHEMA_NAME, ‘history_str‘, 28, 24, 14); CALL partition_maintenance(SCHEMA_NAME, ‘history_text‘, 28, 24, 14); CALL partition_maintenance(SCHEMA_NAME, ‘history_uint‘, 28, 24, 14); CALL partition_maintenance(SCHEMA_NAME, ‘trends‘, 730, 24, 14); CALL partition_maintenance(SCHEMA_NAME, ‘trends_uint‘, 730, 24, 14); END$$ DELIMITER ;
保存成文件，再次导入存储过程：
/usr/local/mysql/bin/mysql -uroot -p‘123456‘ zabbix < partition_all.sql
以后只需要调用这个存储过程就可以了，每天执行一次：
mysql -uzabbix -pzabbix zabbix -e "CALL partition_maintenance_all(‘zabbix‘);"
四、最后关掉Zabbix的HouseKeeper功能：
最后附上两个存储过程的文件~
参考文章：
https://www.zabbix.org/wiki/Docs/howto/mysql_partition
本文出自 “运维笔记” 博客，请务必保留此出处http://lihuipeng.blog.51cto.com/3064864/1561221
原文地址：http://lihuipeng.blog.51cto.com/3064864/1561221
