Linux服务器SVN配置及管理项目迁移

yum install subversion

# cd /opt/svn/
# svnadmin create /opt/svn/test

drwxr-xr-x 2 root root 4096 Mar 30 20:05 conf
drwxr-sr-x 6 root root 4096 Mar 30 20:05 db
-r--r--r-- 1 root root 2 Mar 30 20:05 format
drwxr-xr-x 2 root root 4096 Mar 30 20:05 hooks
drwxr-xr-x 2 root root 4096 Mar 30 20:05 locks
-rw-r--r-- 1 root root 229 Mar 30 20:05 README.txt

authz 是权限控制文件
passwd 是帐号密码文件
svnserve.conf 是SVN服务配置文件

### This file is an example authorization file for svnserve.
### Its format is identical to that of mod_authz_svn authorization
### files.
### As shown below each section defines authorizations for the path and
### (optional) repository specified by the section name.
### The authorizations follow. An authorization line can refer to:
###  - a single user,
###  - a group of users defined in a special [groups] section,
###  - an alias defined in a special [aliases] section,
###  - all authenticated users, using the ‘$authenticated‘ token,
###  - only anonymous users, using the ‘$anonymous‘ token,
###  - anyone, using the ‘*‘ wildcard.
###
### A match can be inverted by prefixing the rule with ‘~‘. Rules can
### grant read (‘r‘) access, read-write (‘rw‘) access, or no access
### (‘‘).
[aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average

[groups]
# harry_and_sally = harry,sally
# harry_sally_and_joe = harry,sally,&joe

#用户组
dev = dev
#项目用户名
bbt = yukai.li,test

# [/foo/bar]
# harry = rw
# &joe = r
# * =

# [repository:/baz/fuz]
# @harry_and_sally = rw
# * = r

#给予用户加入读写权限
[/]
@dev = rw
[/]
@bbt = rw

[root@bbt-dev conf]# more passwd
### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line.
#用户名及加入用户名密码
[users]
# harry = harryssecret
# sally = sallyssecret
test = 123456
yukai.li = 666666

#把这个几个前面#去掉就可以了，最后一个直接填写你创建的项目目录名
anon-access = one
auth-access = write
password-db = passwd
authz-db = authz
realm = test

[root@bbt-dev conf]# more svnserve.conf
### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository.  (If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.)
### Visit http://subversion.tigris.org/ for more information.

[general]
### These options control access to the repository for unauthenticated
### and authenticated users.  Valid values are "write", "read",
### and "none".  The sample settings below are the defaults.
anon-access = one
auth-access = write
### The password-db option controls the location of the password
### database file.  Unless you specify a path starting with a /,
### the file‘s location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control.  Unless you specify a path
### starting with a /, the file‘s location is relative to the the
### directory containing this file.  If you don‘t specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa.  The default realm
### is repository‘s uuid.
realm = test

[sasl]
### This option specifies whether you want to use the Cyrus SASL
### library for authentication. Default is false.
### This section will be ignored if svnserve is not built with Cyrus
### SASL support; to check, run ‘svnserve --version‘ and look for a line
### reading ‘Cyrus SASL authentication is available.‘
# use-sasl = true
### These options specify the desired strength of the security layer
### that you want SASL to provide. 0 means no encryption, 1 means
### integrity-checking only, values larger than 1 are correlated
### to the effective key length for encryption (e.g. 128 means 128-bit
### encryption). The values below are the defaults.
# min-encryption = 0
# max-encryption = 256
[root@bbt-dev conf]#

# svnserve -d -r /opt/svn/test

# ps -ef|grep svn
root 12538 1 0 14:40 ? 00:00:00 svnserve -d -r /opt/svn/test
#或者直接用这个命令查看;
[root@bbt-dev bbt]# ps -aux
root       6122  0.0  0.0 152416   864 ?        Ss   Sep21   0:00 svnserve -d -r /opt/svn/test
#这样表示已启动成功，再启动的时候你只需要启动你创建的beibeitou这个项目目录就好;

使用 TortoiseSVN , 输入地址svn://192.168.0.204:3690/即可 , 再输入用户名和密码就能访问了
（注：那个端口加不加都行了，我个人测试了一下可以不用添加，另外解释一下为什么地址开头是svn,是因为
这个表示Linux服务器上定义的一个区别，用来区分http表示Windows上的svn，小编个人是这么认为的，如大家想知道，可以去研究一下）

# killall svnserve     //停止
# svnserve -d -r /opt/svn/test   // 启动

# svn import [源路径][目标版本库路径] -m [日志信息]//例如：
svn import /home/work/ file:///svn/project1/trunk/ -m "Initial import"
#不过我这里没有这样操作使用，可以看看继续操作，因为感觉那样来回操作很麻烦；

Subclipse - https://dl.bintray.com/subclipse/releases/subclipse/latest/