码迷,mamicode.com
首页 > 系统相关 > 详细

vmware虚拟机迁移导致的eth0消失问题

时间:2014-10-10 21:27:14      阅读:226      评论:0      收藏:0      [点我收藏+]

标签:des   style   io   ar   for   文件   div   问题   on   

将原来的ubuntu虚拟机文件迁移到另一台机子之后。

ifconfig显示只有一个lo网卡,网上找了一些文章,大多是修改/etc/network/interfaces

原来内容是

# #######################################################
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet dhcp

# #######################################################

将eth0改为静态ip

# #######################################################

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.60.218
gateway 192.168.60.1
netmask 255.255.255.0

# #######################################################

reboot后执行ifconfig,仍然只显示lo,找不到eth0

无意中执行ifconfig -a,显示有eth1,eth2和lo。

于是修改/etc/network/interfaces,将原来的eth0修改为eth1

# #######################################################

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth1
iface eth1 inet static
address 192.168.60.218
gateway 192.168.60.1
netmask 255.255.255.0

# #######################################################

reboot后,ifconfig终于显示eth1,熟悉的网络又回来了。这里简单记录一下,以免下次再次遇到。



vmware虚拟机迁移导致的eth0消失问题

标签:des   style   io   ar   for   文件   div   问题   on   

原文地址:http://blog.csdn.net/cackeme/article/details/39964981

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!