标签：agent err mod ups limit ges exp kill -9 操作
Nginx配置TCP请求转发+http请求转发+keepalived高可用[root@baolin conf]#yum -y install pcre-devel openssl openssl-devel library
wget http://nginx.org/download/nginx-1.9.5.tar.gz
tar -xf nginx-1.9.5.tar.gz -C /usr/local/
cd /usr/local/nginx-1.9.5/
./configure --prefix=/usr/local/nginx/ --with-http_stub_status_module --with-http_ssl_module --with-stream --with-stream_ssl_module
make && make install
vim /etc/profile.d/nginx.sh
export PATH=/usr/local/nginx/sbin:$PATH
source /etc/profile.d/nginx.sh
nginx 启动。
2、创建conf文件存放目录：
mkdir /usr/local/nginx/conf/conf.d/
3、配置
01、nginx.conf
vim /usr/local/nginx/conf/nginx.conf
user nginx;
worker_processes auto;
error_log /var/log/nginx/error.log;
pid /usr/local/nginx/logs/nginx.pid;
include /usr/local/nginx/conf/conf.d/.conf;
events {
worker_connections 25600; #最大连接数
use epoll; #指明并发连接请求的处理方法
accept_mutex on; #处理新的连接请求的方法;on意味着由worker轮流处理新请求，
#并发总数是 worker_processes 和 worker_connections 的乘积
#即 max_clients = worker_processes worker_connections
#在设置了反向代理的情况下，max_clients = worker_processes worker_connections / 4 为什么
#为什么上面反向代理要除以4，应该说是一个经验值
#根据以上条件，正常情况下的Nginx Server可以应付的最大连接数为：4 8000 = 32000
#worker_connections 值的设置跟物理内存大小有关
#因为并发受IO约束，max_clients的值须小于系统可以打开的最大文件数
#而系统可以打开的最大文件数和内存大小成正比，一般1GB内存的机器上可以打开的文件数大约是10万左右
#我们来看看360M内存的VPS可以打开的文件句柄数是多少：
#$ cat /proc/sys/fs/file-max
#输出 34336
#32000 < 34336，即并发连接总数小于系统可以打开的文件句柄总数，这样就在操作系统可以承受的范围之内
#所以，worker_connections 的值需根据 worker_processes 进程数目和系统可以打开的最大文件总数进行适当地进行设置
#使得并发总数小于操作系统可以打开的最大文件数目
#其实质也就是根据主机的物理CPU和内存进行配置
#当然，理论上的并发总数可能会和实际有所偏差，因为主机还有其他的工作进程需要消耗系统资源。
}
02、vim /usr/local/nginx/conf/conf.d/yewu.conf
http {
log_format main ‘ "$http_x_forwarded_for" | [$time_local] | $host | $remote_addr | $request | $request_time | $body_bytes_sent | $status |‘
‘| $upstream_addr | $upstream_response_time | $upstream_status |‘
‘ "$http_referer" | "$http_user_agent" ‘;
access_log /var/log/nginx/access.log main;
charset utf-8;
sendfile on;
tcp_nopush on;
tcp_nodelay on;
keepalive_timeout 65;
types_hash_max_size 2048;
default_type application/octet-stream;
server {
listen 80;
root /data/nginx;
index index.html index.htm *.html index.jsp;
location ^~ /configCenter-vals/ {
proxy_pass http://192.168.1.141:8080;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Via "nginx";
}
location ^~ /configCenter/ {
proxy_pass http://192.168.1.139:8082;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Via "nginx";
}
location ^~ /dubbo_admin/ {
proxy_pass http://192.168.1.139:8082;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Via "nginx";
}
location ^~ /appserver/ {
proxy_pass http://192.168.1.160:8080;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Via "nginx";
}
location ^~ /asserver/ {
proxy_pass http://192.168.1.161:8080;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Via "nginx";
}
location ^~ /idsoserver/ {
proxy_pass http://192.168.1.161:8080;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Via "nginx";
}
location ^~ /vals-ap/ {
proxy_pass http://192.168.1.142:8080;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Via "nginx";
}
location ^~ /eidboss/ {
proxy_pass https://192.168.1.145:8080;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Via "nginx";
}
location ^~ /asboss/ {
proxy_pass http://192.168.1.145:8081;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Via "nginx";
}
}
}
03、vim /usr/local/nginx/conf/conf.d/eid.conf
stream {
upstream eid_device {
server 192.168.1.12:8008 max_fails=1 fail_timeout=1s weight=1;
server 192.168.1.12:8008 max_fails=1 fail_timeout=1s weight=1;
}
server {
listen 8008;
proxy_pass eid_device;
}
}4、keepalived高可用配置
01、master配置
vim /etc/keepalived/keepalived.conf
global_defs {
notification_email {br/>xxx@.com
}
notification_email_from xxx@.com
smtp_server smtp.exmail.qq.com
smtp_connect_timeout 30
router_id nginx-master
}
vrrp_script chk_httpd {
script "/etc/keepalived/check_and_start_httpd.sh"
interval 2
weight -10
fall 3
rise 2
}
vrrp_instance VI_1 {
nopreempt
state MASTER
interface eth1
virtual_router_id 66
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.1.8/32 dev eth1 label eth1:0
192.168.1.9/32 dev eth1 label eth1:1
}
track_script { # 引用VRRP脚本，即在 vrrp_script 部分指定的名字。定期运行它们来改变优先级，并最终引发主备切换。
chk_httpd
}
}
02、backup配置
vim /etc/keepalived/keepalived.conf
global_defs {
notification_email {
xxx@.com
}
notification_email_from xxx@.com
smtp_server smtp.exmail.qq.com
smtp_connect_timeout 30
router_id nginx-backup
}
vrrp_script chk_httpd {
script "/etc/keepalived/check_and_start_httpd.sh"
interval 2
weight -10
fall 3
rise 2
}
vrrp_instance VI_1 {
# nopreempt
state BACKUP
interface eth1
virtual_router_id 66
priority 95
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.1.8/32 dev eth1 label eth1:0
192.168.1.9/32 dev eth1 label eth1:1
}
track_script { # 引用VRRP脚本，即在 vrrp_script 部分指定的名字。定期运行它们来改变优先级，并最终引发主备切换。
chk_httpd
}
}
03、脚本：vim /etc/keepalived/check_and_start_httpd.sh
#!/bin/bash
counter=$(ps -C nginx --no-heading|wc -l)
if [ "${counter}" = "0" ]; then
ps -ef | grep nginx | grep -v grep | awk ‘{print $2}‘ | sed -e "s/^/kill -9 /g" | sh - #/usr/local/bin/nginx 此为nginx启动方式。
nginx
sleep 2
counter=$(ps -C nginx --no-heading|wc -l)
if [ "${counter}" = "0" ]; then
systemctl stop keepalived
echo -e "$ip of nginx is stop ,nginx service switch nginx slave \nlocal is virtual ip : $virtual_ip not exist " |mail -s "$ip of nginx is stop" xxx@.com
fi
fi
04、邮箱配置：
yum -y install mailx
yum install -y sendmail
yum install -y sendmail-cf
yum -y install bc
echo "TRUST_AUTH_MECH(‘EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN‘)dnl" >> /etc/mail/sendmail.mc
echo "define(‘confAUTH_MECHANISMS‘, ‘EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN‘)dnl" >> /etc/mail/sendmail.mc
sed -i s#127.0.0.1#0.0.0.0#g /etc/mail/sendmail.mc
grep "OPTIONS" /etc/mail/sendmail.mc
m4 /etc/mail/sendmail.mc > /etc/mail/sendmail.cf
echo ‘set from=xxx@.com‘ >> /etc/mail.rc
echo ‘set smtp=smtp.exmail.qq.com‘ >> /etc/mail.rc
echo ‘set smtp-auth-user=xxx@.com‘ >> /etc/mail.rc
echo ‘set smtp-auth-password=xxxx‘ >> /etc/mail.rc
echo ‘set smtp-auth=login‘ >> /etc/mail.rc
IP1=$(ifconfig|grep ‘192.168‘|awk ‘{print $2}‘)
IP2=$(ifconfig|grep ‘10.10‘|awk ‘{print $2}‘)
abc="abc.mail.com"
echo "$IP2 `hostname` $abc" >> /etc/hosts
systemctl enable sendmail
systemctl start sendmail
systemctl status sendmailNginx配置TCP转发+http转发+keepalived高可用
标签：agent err mod ups limit ges exp kill -9 操作
原文地址：http://blog.51cto.com/8248183/2327382
