标签：install sqli 安装PHP5 libiconv open restart Opens libs error
由于公司有新服务器需要构建一套LNMP平台，且需要编译安装各个部件，所以记录下此文章。
这是安装PHP涉及到的软件包（可以自行决定使用哪个版本）：
├── libiconv-1.15.tar.gz ├── libmcrypt-2.5.8.tar.gz ├── openssl-1.0.2o.tar.gz ├── php-5.6.38.tar.gz └── zend-loader-php5.6-linux-x86_64.tar.gz
涉及到的开机启动脚本：
1. init.d.php-fpm
#! /bin/sh
# chkconfig: 2345 55 25
# Description: Startup script for php-fpm on Debian. Place in /etc/init.d and
# run ‘update-rc.d -f php-fpm defaults‘, or use the appropriate command on your
# distro. For CentOS/Redhat run: ‘chkconfig --add php-fpm‘
### BEGIN INIT INFO
# Provides: php-fpm
# Required-Start: $all
# Required-Stop: $all
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: starts php-fpm
# Description: starts php-fpm
### END INIT INFO
# Author: licess
# website: https://lnmp.org
php_fpm_BIN=/usr/local/php/bin/php-cgi
php_fpm_CONF=/usr/local/php/etc/php-fpm.conf
php_fpm_PID=/usr/local/php/logs/php-fpm.pid
php_opts="--fpm-config $php_fpm_CONF"
wait_for_pid () {
try=0
while test $try -lt 35 ; do
case "$1" in
‘created‘)
if [ -f "$2" ] ; then
try=‘‘
break
fi
;;
‘removed‘)
if [ ! -f "$2" ] ; then
try=‘‘
break
fi
;;
esac
echo -n .
try=`expr $try + 1`
sleep 1
done
}
case "$1" in
start)
echo -n "Starting php_fpm "
$php_fpm_BIN --fpm $php_opts
if [ "$?" != 0 ] ; then
echo " failed"
exit 1
fi
wait_for_pid created $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
stop)
echo -n "Shutting down php_fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -TERM `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
quit)
echo -n "Gracefully shutting down php_fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -QUIT `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
restart)
$0 stop
$0 start
;;
reload)
echo -n "Reload service php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -USR2 `cat $php_fpm_PID`
echo " done"
;;
status)
if [ -f "$php_fpm_PID" ]; then
echo "PHP-FPM is running."
else
echo "PHP-FPM is stopped."
fi
;;
logrotate)
echo -n "Re-opening php-fpm log file "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -USR1 `cat $php_fpm_PID`
echo " done"
;;
*)
echo "Usage: /etc/init.d/php-fpm {start|stop|quit|restart|reload|status|logrotate}"
exit 1
;;
esac
1）安装依赖包
yum install make cmake gcc gcc-c++ gcc-g77 flex bison file libtool libtool-libs autoconf kernel-devel patch wget crontabs libjpeg libjpeg-devel libpng libpng-devel libpng10 libpng10-devel gd gd-devel libxml2 libxml2-devel zlib zlib-devel glib2 glib2-devel unzip tar bzip2 bzip2-devel libzip-devel libevent libevent-devel ncurses ncurses-devel curl curl-devel libcurl libcurl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel vim-minimal gettext gettext-devel ncurses-devel gmp-devel pspell-devel unzip libcap diffutils ca-certificates net-tools libc-client-devel psmisc libXpm-devel git-core c-ares-devel libicu-devel libxslt libxslt-devel xz expat-devel libaio-devel rpcgen libtirpc-devel perl
2）安装openssl
tar vxzf openssl-1.0.2o.tar.gz cd openssl-1.0.2o ./config -fPIC --prefix=/usr/local/openssl --openssldir=/usr/local/openssl make depend make -j `grep ‘processor‘ /proc/cpuinfo | wc -l` make install
3）安装libiconv
cd ../ tar vxzf libiconv-1.15.tar.gz cd libiconv-1.15 ./configure --enable-static make -j `grep ‘processor‘ /proc/cpuinfo | wc -l` make install echo ‘/usr/local/lib‘ >> /etc/ld.so.conf && /sbin/ldconfig
4）安装libmcrypt
cd ../ tar vxzf libmcrypt-2.5.8.tar.gz cd libmcrypt-2.5.8 ./configure make -j `grep ‘processor‘ /proc/cpuinfo | wc -l` make install cd libltdl/ ./configure --enable-ltdl-install make -j `grep ‘processor‘ /proc/cpuinfo | wc -l` make install ln -sf /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la ln -sf /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so ln -sf /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4 ln -sf /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8 ldconfig
5）安装php
5.6版本
./configure --prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc --with-config-file-scan-dir=/usr/local/php/conf.d --enable-fpm --with-fpm-user=www --with-fpm-group=www --with-mysql=mysqlnd --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --with-iconv-dir --with-freetype-dir=/usr/local/freetype --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --enable-mbregex --enable-mbstring --with-mcrypt --enable-ftp --with-gd --enable-gd-native-ttf --with-openssl=/usr/local/openssl --with-mhash --enable-pcntl --enable-sockets --with-xmlrpc --enable-zip --enable-soap --with-gettext --disable-fileinfo --enable-opcache --enable-intl --with-xsl
7以上版本
./configure --prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc --with-config-file-scan-dir=/usr/local/php/conf.d --enable-fpm --with-fpm-user=www --with-fpm-group=www --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --with-iconv-dir --with-freetype-dir=/usr/local/freetype --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --enable-mbregex --enable-mbstring --enable-ftp --with-gd --with-openssl=/usr/local/openssl --with-mhash --enable-pcntl --enable-sockets --with-xmlrpc --enable-zip --enable-soap --with-gettext --disable-fileinfo --enable-opcache --enable-intl --with-xsl
make ZEND_EXTRA_LIBS=‘-liconv‘ -j `grep ‘processor‘ /proc/cpuinfo | wc -l` make install
6）添加软链接
ln -sf /usr/local/php/bin/php /usr/bin/php ln -sf /usr/local/php/bin/phpize /usr/bin/phpize ln -sf /usr/local/php/bin/pear /usr/bin/pear ln -sf /usr/local/php/bin/pecl /usr/bin/pecl ln -sf /usr/local/php/sbin/php-fpm /usr/bin/php-fpm
7）创建配置文件目录
mkdir -p /usr/local/php/{etc,conf.d}
cp php.ini-production /usr/local/php/etc/php.ini
9）修改php.ini配置文件
sed -i ‘s/post_max_size =.*/post_max_size = 50M/g‘ /usr/local/php/etc/php.ini sed -i ‘s/upload_max_filesize =.*/upload_max_filesize = 50M/g‘ /usr/local/php/etc/php.ini sed -i ‘s/;date.timezone =.*/date.timezone = PRC/g‘ /usr/local/php/etc/php.ini sed -i ‘s/short_open_tag =.*/short_open_tag = On/g‘ /usr/local/php/etc/php.ini sed -i ‘s/;cgi.fix_pathinfo=.*/cgi.fix_pathinfo=0/g‘ /usr/local/php/etc/php.ini sed -i ‘s/max_execution_time =.*/max_execution_time = 300/g‘ /usr/local/php/etc/php.ini sed -i ‘s/disable_functions =.*/disable_functions = passthru,exec,system,chroot,chgrp,chown,shell_exec,proc_open,proc_get_status,popen,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server/g‘ /usr/local/php/etc/php.ini
10）安装扩展工具
pear config-set php_ini /usr/local/php/etc/php.ini pecl config-set php_ini /usr/local/php/etc/php.ini
11）安装ZendGuardLoader（php7以上不用安装）
cd ../ tar vzxf zend-loader-php5.6-linux-x86_64.tar.gz mkdir -p /usr/local/zend/ cp zend-loader-php5.6-linux-x86_64/ZendGuardLoader.so /usr/local/zend/ cat >/usr/local/php/conf.d/002-zendguardloader.ini<<EOF [Zend ZendGuard Loader] zend_extension=/usr/local/zend/ZendGuardLoader.so zend_loader.enable=1 zend_loader.disable_licensing=0 zend_loader.obfuscation_level_support=3 zend_loader.license_path= EOF
12）添加用户组
groupadd www useradd -s /sbin/nologin -g www www
13）修改php-fpm配置文件
cat >/usr/local/php/etc/php-fpm.conf<<EOF [global] pid = /usr/local/php/var/run/php-fpm.pid error_log = /usr/local/php/var/log/php-fpm.log log_level = notice [www] listen = /tmp/php-cgi.sock listen.backlog = -1 listen.allowed_clients = 127.0.0.1 listen.owner = www listen.group = www listen.mode = 0666 user = www group = www pm = dynamic pm.max_children = 10 pm.start_servers = 2 pm.min_spare_servers = 1 pm.max_spare_servers = 6 request_terminate_timeout = 100 request_slowlog_timeout = 0 slowlog = var/log/slow.log EOF
14）开机启动
cp php-5.6.38/sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm # init.d.php-fpm 见文章头 chmod +x /etc/init.d/php-fpm chkconfig --add php-fpm chkconfig php-fpm on
15）启动测试
service php-fpm start
标签：install sqli 安装PHP5 libiconv open restart Opens libs error
原文地址：https://www.cnblogs.com/ranwuer/p/10348646.html
