码迷,mamicode.com
首页 > 系统相关 > 详细

Lwip:原生态的Linux socket应用如何移植到Lwip上

时间:2019-02-04 19:39:48      阅读:296      评论:0      收藏:0      [点我收藏+]

标签:inf   tcpip   ESS   read   发布   hardware   open   har   mil   

lwIP - A Lightweight TCP/IP stack

在上一篇中,我们了解到在OpenFastPath上如何移植原生态的Linux Socket应用程序,那么,对于另外一个老牌的小型TCPIP协议栈------LWIP,又是如何处理这个问题的。

1、lwip重新定义了函数符号

#define listen(s,backlog)                         lwip_listen(s,backlog)
/** @ingroup socket */
#define recv(s,mem,len,flags)                     lwip_recv(s,mem,len,flags)
/** @ingroup socket */
#define recvmsg(s,message,flags)                  lwip_recvmsg(s,message,flags)
/** @ingroup socket */
#define recvfrom(s,mem,len,flags,from,fromlen)    lwip_recvfrom(s,mem,len,flags,from,fromlen)
/** @ingroup socket */
#define send(s,dataptr,size,flags)                lwip_send(s,dataptr,size,flags)
/** @ingroup socket */
#define sendmsg(s,message,flags)                  lwip_sendmsg(s,message,flags)
/** @ingroup socket */
#define sendto(s,dataptr,size,flags,to,tolen)     lwip_sendto(s,dataptr,size,flags,to,tolen)
/** @ingroup socket */
#define socket(domain,type,protocol)              lwip_socket(domain,type,protocol)
#if LWIP_SOCKET_SELECT
/** @ingroup socket */
#define select(maxfdp1,readset,writeset,exceptset,timeout)     lwip_select(maxfdp1,readset,writeset,exceptset,timeout)
#endif
#if LWIP_SOCKET_POLL
/** @ingroup socket */
#define poll(fds,nfds,timeout)                    lwip_poll(fds,nfds,timeout)
#endif

 

2、lwip重新定义了socket结构体

#if LWIP_IPV4
/* members are in network byte order */
struct sockaddr_in {
  u8_t            sin_len;
  sa_family_t     sin_family;
  in_port_t       sin_port;
  struct in_addr  sin_addr;
#define SIN_ZERO_LEN 8
  char            sin_zero[SIN_ZERO_LEN];
};
#endif /* LWIP_IPV4 */

3、lwip重新定义了socket宏

/* Socket protocol types (TCP/UDP/RAW) */
#define SOCK_STREAM     1
#define SOCK_DGRAM      2
#define SOCK_RAW        3

/*
 * Option flags per-socket. These must match the SOF_ flags in ip.h (checked in init.c)
 */
#define SO_REUSEADDR   0x0004 /* Allow local address reuse */
#define SO_KEEPALIVE   0x0008 /* keep connections alive */
#define SO_BROADCAST   0x0020 /* permit to send and to receive broadcast messages (see IP_SOF_BROADCAST option) */


/*
 * Additional options, not kept in so_options.
 */
#define SO_DEBUG        0x0001 /* Unimplemented: turn on debugging info recording */
#define SO_ACCEPTCONN   0x0002 /* socket has had listen() */
#define SO_DONTROUTE    0x0010 /* Unimplemented: just use interface addresses */
#define SO_USELOOPBACK  0x0040 /* Unimplemented: bypass hardware when possible */
#define SO_LINGER       0x0080 /* linger on close if data present */
#define SO_DONTLINGER   ((int)(~SO_LINGER))

 

说句题外话:LWIP从2012年的1.4.1版本后基本没有更新了,近两年突然发布了很多新版本,功能(主要是apps)也大大增强,说明这个开源还是有一定市场基础的。

Lwip:原生态的Linux socket应用如何移植到Lwip上

标签:inf   tcpip   ESS   read   发布   hardware   open   har   mil   

原文地址:https://www.cnblogs.com/shaoyangz/p/10346240.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!