标签：prim 2.0 art fat min 参数 table efault custom
Using DBCA to Create a Data Guard Standby
The Database Configuration Assistant (DBCA) can also be used as a simple command-line method to create an Oracle Data Guard physical standby database.
The DBCA command qualifier used to create the physical standby database is createDuplicateDB .
DBCA can only be used to create standby databases for non-multitenant primary databases. In addition, this capability creates only single instance standby databases,not Oracle Real Application Clusters (Oracle RAC) databases. If required, the standby can then be converted to an Oracle RAC standby database, either manually or using Oracle Enterprise Manager Cloud Control.
在 12cR2 （ 12.2.0.1 ）之前创建物理备库的方法有：
1 、使用 RMAN 备份恢复方法；
2 、在 11g 时可以选择 duplicate 方式创建物理备库；通过这种方式直接在线从主库搭建物理备库。
到 12cR2 （ 12.2.0.1 ）后， Oracle 又提供更简单的方式来创建物理备库，即使用 DBCA 方式直接建立物理备库。这个功能再次简化了创建备库的复杂度。
通过 DBCA 提供的参数 createDuplicateDB 可以很容易的搭建一个物理备库。其具体语法如下：
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
|
-------------- 12cR2-createDuplicateDB - Command to Duplicate a database. -gdbName <Global database name> -primaryDBConnectionString <EZCONNECT string to connect to primary database for example "host:port/servicename"> -sid <Database system identifier> [-createAsStandby <Option to create a standby database>] [-dbUniqueName <db_unique_name for standby db>] [-customScripts <A comma separated list of SQL scripts which needs to be run post db creation.The scripts are run in order they are listed>] [-datafileDestination <Destination directory for all database files>] [-initParams <Comma separated list of name=value pairs>] [-initParamsEscapeChar <Specify escape character for comma when a specific initParam has multiple values.If the escape character is not specified backslash is the default escape character>] ----------- 18c-createDuplicateDB - Command to Duplicate a database. -gdbName <Global database name> -primaryDBConnectionString <EZCONNECT string to connect to primary database for example "host:port/servicename"> -sid <Database system identifier> [-initParams <Comma separated list of name=value pairs>] [-initParamsEscapeChar <Specify escape character for comma when a specific initParam has multiple values.If the escape character is not specified backslash is the default escape character>] [-policyManaged | -adminManaged] [-policyManaged <Policy managed database, default option is Admin managed database>] -serverPoolName <Specify the single server pool name in case of create server pool or comma separated list in case of existing server pools> [-pqPoolName <value>] [-createServerPool <Create a new server pool, which will be used by the database>] [-pqPoolName <value>] [-forceServerPoolCreation <To create server pool by force when adequate free servers are not available. This may affect the database which is already in running mode>] [-pqCardinality <value>] [-cardinality <Specify the cardinality of the new server pool that is to be created, default is the number of qualified nodes>] [-adminManaged <Admin managed database, this is default option>] [-datafileDestination <Destination directory for all database files>] [-nodelist <Node names separated by comma for the database>] [-databaseConfigType <SINGLE | RAC | RACONENODE>] [-RACOneNodeServiceName <Service name for the service to be created for RAC One Node database. This option is mandatory when the databaseConfigType is RACONENODE>] [-createAsStandby <Option to create a standby database>] [-dbUniqueName <db_unique_name for standby db>] [-customScripts <A comma separated list of SQL scripts which needs to be run post db creation.The scripts are run in order they are listed>] ----------- 19c -createDuplicateDB - Command to Duplicate a database. -gdbName <Global database name> -primaryDBConnectionString <EZCONNECT string to connect to primary database for example "host:port/servicename"> -sid <Database system identifier> [-useWalletForDBCredentials <true | false> Specify true to load database credentials from wallet] -dbCredentialsWalletLocation <Path of the directory containing the wallet files> [-dbCredentialsWalletPassword <Password to open wallet with auto login disabled>] [-initParams <Comma separated list of name=value pairs>] [-initParamsEscapeChar <Specify escape character for comma when a specific initParam has multiple values.If the escape character is not specified backslash is the default escape character>] [-policyManaged | -adminManaged] [-policyManaged <Policy managed database, default option is Admin managed database>] -serverPoolName <Specify the single server pool name in case of create server pool or comma separated list in case of existing server pools> [-pqPoolName <value>] [-createServerPool <Create a new server pool, which will be used by the database>] [-pqPoolName <value>] [-forceServerPoolCreation <To create server pool by force when adequate free servers are not available. This may affect the database which is already in running mode>] [-pqCardinality <value>] [-cardinality <Specify the cardinality of the new server pool that is to be created, default is the number of qualified nodes>] [-adminManaged <Admin managed database, this is default option>] [-datafileDestination <Destination directory for all database files>] [-nodelist <Node names separated by comma for the database>] [-databaseConfigType <SINGLE | RAC | RACONENODE>] [-RACOneNodeServiceName <Service name for the service to be created for RAC One Node database. This option is mandatory when the databaseConfigType is RACONENODE>] [-createAsStandby <Option to create a standby database>] [-dbUniqueName <db_unique_name for standby db>] [-customScripts <A comma separated list of SQL scripts which needs to be run post db creation.The scripts are run in order they are listed>] |
虽然通过 DBCA 能非常简单的创建一个物理备库，但是要使用这个功能，必须满足以下条件：
① 主库必须是单机环境，非 RAC 数据库；
② 主库必须是非 CDB 环境；
如果不满足以上条件， 那么 在使用 DBCA 创建备库的时候，会提示如下错误：
若 主库是 CDB 环境，错误如下：
|
1
2
|
[FATAL] [DBT-16057] Specified primary database is a container database (CDB).CAUSE: Duplicate database operation is supported only for non container databases. |
若 主库是 RAC 数据库，错误如下：
|
1
2
|
[FATAL] [DBT-16056] Specified primary database is not a Single Instance (SI) database.CAUSE: Duplicate database operation is supported only for SI databases. |
也就说通过 DBCA 搭建出来的备库也是一个单机非 CDB 的备库。
需要注意的是，在 12cR2 （ 12.2.0.1 ）中，通过 DBCA 创建物理需要保证主库是单机非 CDB 的库，但是从 Oracle 18c （ 12.2.0.2 ）开始，这些限制条件已经取消了，即主库是 CDB 或 rac 环境都可以通过 dbca 来创建物理备库。
以下命令为 18c 中创建 rac 类型的 dg ：
|
1
2
3
4
5
6
7
8
9
10
11
|
dbca -silent -createDuplicateDB \-gdbName lhrdb \-sid lhrdbdg \-sysPassword oracle \-primaryDBConnectionString 192.168.20.10:1521/lhrdb \-nodelist rac18c-n1,rac18c-n2 \-adminManaged \-databaseConfigType RAC \-createAsStandby -dbUniqueName lhrdbdg \-datafileDestination ‘+DATA‘ \-initParams db_create_file_dest=+DATA, db_create_online_log_dest_1=+DATA,local_listener="(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.20.10)(PORT=1521)))" |
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
|
SELECT CDB FROM V$DATABASE; alter database force logging;alter database open;alter database archivelog;alter pluggable database all open;alter pluggable database all save state; select thread#,group#,bytes/1024/1024 SIZE_MB, status,members from v$log;select member from v$logfile;alter database add standby logfile thread 1 group 4 ‘/u01/app/oracle/oradata/LHR19C/standby_redo04.log‘ size 50M ;alter database add standby logfile thread 1 group 5 ‘/u01/app/oracle/oradata/LHR19C/standby_redo05.log‘ size 50M ;alter database add standby logfile thread 1 group 6 ‘/u01/app/oracle/oradata/LHR19C/standby_redo06.log‘ size 50M ;alter database add standby logfile thread 1 group 7 ‘/u01/app/oracle/oradata/LHR19C/standby_redo07.log‘ size 50M ; --------配置tnslhr19c = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.59.52)(PORT = 1522)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = lhr19c) ) ) lhr19cdg = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.59.52)(PORT = 1522)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = lhr19cdg) ) ) --------配置监听LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.59.52)(PORT = 1521)) ) ) SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (GLOBAL_DBNAME = lhr19c) (ORACLE_HOME = /u01/app/oracle/product/19.2.0/dbhome_1) (SID_NAME = lhr19c) ) (SID_DESC = (GLOBAL_DBNAME = lhr19cdg) (ORACLE_HOME = /u01/app/oracle/product/19.2.0/dbhome_1) (SID_NAME = lhr19cdg) ) ) LISTENER_DG = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.59.52)(PORT = 1522)) ) SID_LIST_LISTENER_DG = (SID_LIST = (SID_DESC = (GLOBAL_DBNAME = lhr19c) (ORACLE_HOME = /u01/app/oracle/product/19.2.0/dbhome_1) (SID_NAME = lhr19c) ) (SID_DESC = (GLOBAL_DBNAME = lhr19cdg) (ORACLE_HOME = /u01/app/oracle/product/19.2.0/dbhome_1) (SID_NAME = lhr19cdg) ) ) lsnrctl start LISTENER_DG dbca -silent -createDuplicateDB \-gdbName lhr19c \-sid lhr19cdg \-sysPassword lhr \-primaryDBConnectionString 192.168.59.52:1522/lhr19c \-nodelist raclhr-18c-n1 \-databaseConfigType SINGLE \-createAsStandby -dbUniqueName lhr19cdg \-datafileDestination ‘/u01/app/oracle/oradata/lhr19cdg/‘ \-initParams db_create_file_dest=/u01/app/oracle/oradata/lhr19cdg/, db_create_online_log_dest_1=/u01/app/oracle/oradata/lhr19cdg/,local_listener="(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.59.52)(PORT=1522)))" --主库修改参数alter system set LOG_ARCHIVE_DEST_1=‘LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=lhr19c‘;alter system set LOG_ARCHIVE_DEST_2=‘service=lhr19cdg VALID_FOR=(online_logfiles,primary_role) DB_UNIQUE_NAME=lhr19cdg‘;alter system set log_archive_config=‘dg_config=(lhr19c,lhr19cdg)‘;alter system set db_file_name_convert=‘/u01/app/oracle/oradata/LHR19CDG/‘,‘/u01/app/oracle/oradata/LHR19C/‘ scope=spfile;alter system set log_file_name_convert=‘/u01/app/oracle/oradata/LHR19CDG/‘,‘/u01/app/oracle/oradata/LHR19C/‘ scope=spfile;alter system set standby_file_management=auto scope=spfile;alter system set fal_client=‘lhr19c‘; alter system set fal_server=‘lhr19cdg‘ sid=‘*‘;alter system set local_listener=‘(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.59.52)(PORT=1522)))‘,‘(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.59.52)(PORT=1521)))‘;shutdown immediatestartup --备库修改参数alter system set LOG_ARCHIVE_DEST_1=‘LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=lhr19cdg‘ scope=spfile;alter system set log_archive_config=‘dg_config=(lhr19c,lhr19cdg)‘;alter system set db_file_name_convert=‘/u01/app/oracle/oradata/LHR19C/‘,‘/u01/app/oracle/oradata/LHR19CDG/‘ scope=spfile;alter system set log_file_name_convert=‘/u01/app/oracle/oradata/LHR19C/‘,‘/u01/app/oracle/oradata/LHR19CDG/‘ scope=spfile;alter system set standby_file_management=auto scope=spfile;alter system set fal_client=‘lhr19cdg‘; alter system set fal_server=‘lhr19c‘ sid=‘*‘;alter system set local_listener=‘(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.59.52)(PORT=1522)))‘,‘(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.59.52)(PORT=1521)))‘; shutdown immediatestartupalter system register; --备库查询实时应用alter database recover managed standby database cancel;alter database recover managed standby database using current logfile disconnect;! ps -ef|grep ora_mrp select INST_ID, dbid,name,DB_UNIQUE_NAME,current_scn,protection_mode,database_role,force_logging,open_mode,switchover_status from gv$database; COL NAME FOR A100SET LINESIZE 9999 PAGESIZE 9999COL NEXT_CHANGE# FOR 999999999999999SELECT THREAD#, NAME, SEQUENCE#, ARCHIVED, APPLIED, A.NEXT_CHANGE# FROM V$ARCHIVED_LOG A WHERE A.SEQUENCE# >= (SELECT MAX(B.SEQUENCE#) - 3 FROM V$ARCHIVED_LOG B WHERE B.THREAD# = A.THREAD# AND B.RESETLOGS_CHANGE# = A.RESETLOGS_CHANGE# AND B.RESETLOGS_CHANGE# = (SELECT D.RESETLOGS_CHANGE# FROM V$DATABASE D) AND B.APPLIED = ‘YES‘ GROUP BY B.THREAD#) ORDER BY A.THREAD#, A.SEQUENCE#; |
标签：prim 2.0 art fat min 参数 table efault custom
原文地址：https://www.cnblogs.com/lhrbest/p/10509785.html
