码迷，mamicode.com
首页 > 移动开发 > 详细

将linux和uboot集成到Android编译框架中

时间：2019-05-19 14:23:19      阅读：194      评论：0      收藏：0      [点我收藏+]

标签：oca   theme   uri   poi   source   HERE   aos   complete   break   

环境

Android-7.1
Linux-4.14
u-boot-2018-09
 

概述

        用过高通平台的都知道，人家把Linux内核代码放到了Android代码根目录下的kernel路径下，在编译Android的时候，会连同Linux内核一块编译，最后会将编译出来的Linux内核镜像连同ramdisk.img一块打包到boot.img镜像中。下面我们仿照高通的做法，也将Linux内核代码和uboot代码集成到Android代码中。
        Android代码在编译时没有采用递归的方式，而是通过include，在Android代码根目录下生成一个巨大的Makefile。可以参考如下博客：
 
 

正文

一、建立一个新的产品

下面我们首先添加一个新产品，这个新产品是基于ARMv8架构的。

1、创建如下路径

mkdir -p device/mycompany/myproduct

2、在myproduct下添加如下几个文件

技术图片

  • Android.mk
ifneq ($(filter myproduct, $(TARGET_DEVICE)),)

LOCAL_PATH := $(call my-dir)

# if some modules are built directly from this directory (not subdirectories),
# their rules should be written here.

include $(call all-makefiles-under,$(LOCAL_PATH))
endif
  • AndroidProducts.mk
#
# This file should set PRODUCT_MAKEFILES to a list of product makefiles
# to expose to the build system.  LOCAL_DIR will already be set to
# the directory containing this file.
#
# This file may not rely on the value of any variable other than
# LOCAL_DIR; do not use any conditionals, and do not look up the
# value of any variable that isn‘t set in this file or in a file that
# it includes.
#

PRODUCT_MAKEFILES := $(LOCAL_DIR)/myproduct.mk
  • myproduct.mk
#
# Inherit the full_base and device configurations
$(call inherit-product, $(SRC_TARGET_DIR)/product/full_base.mk)

#
# Overrides
PRODUCT_NAME := myproduct
PRODUCT_DEVICE := myproduct
  • BoardConfig.mk
TARGET_NO_BOOTLOADER := true
TARGET_NO_KERNEL := true
TARGET_NO_RECOVERY := true

# Primary Arch
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_VARIANT := generic
TARGET_CPU_ABI := arm64-v8a

# Secondary Arch
TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_VARIANT := cortex-a15
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi

TARGET_USES_64_BIT_BINDER := true
TARGET_SUPPORTS_32_BIT_APPS := true
TARGET_SUPPORTS_64_BIT_APPS := true

TARGET_BOARD_PLATFORM := myproduct
WITH_DEXPREOPT ?= true
BUILD_EMULATOR_OPENGL := true
USE_OPENGL_RENDERER := true
ANDROID_ENABLE_RENDERSCRIPT := true

# Some framework code requires this to enable BT
BOARD_HAVE_BLUETOOTH := true
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/generic/common/bluetooth

BOARD_USES_GENERIC_AUDIO := true
USE_CAMERA_STUB := true

TARGET_USERIMAGES_USE_EXT4 := true
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1610612736
BOARD_USERDATAIMAGE_PARTITION_SIZE := 1595915776
BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_FLASH_BLOCK_SIZE := 512
  • vendorsetup.sh
#
# Copyright (C) 2013 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# This file is executed by build/envsetup.sh, and can use anything
# defined in envsetup.sh.
#
# In particular, you can add lunch options with the add_lunch_combo
# function: add_lunch_combo generic-eng

add_lunch_combo myproduct-userdebug

3、编译

  • build/envsetup.sh
技术图片
  • lunch
pengdonglin@pengdonglin-dell:~/Android7_1$ lunch

You‘re building on Linux

Lunch menu... pick a combo:
     1. aosp_arm-eng
     2. aosp_arm64-eng
     3. aosp_mips-eng
     4. aosp_mips64-eng
     5. aosp_x86-eng
     6. aosp_x86_64-eng
     7. full_fugu-userdebug
     8. aosp_fugu-userdebug
     9. mini_emulator_arm64-userdebug
     10. m_e_arm-userdebug
     11. m_e_mips64-eng
     12. m_e_mips-userdebug
     13. mini_emulator_x86_64-userdebug
     14. mini_emulator_x86-userdebug
     15. aosp_dragon-userdebug
     16. aosp_dragon-eng
     17. aosp_marlin-userdebug
     18. aosp_sailfish-userdebug
     19. aosp_flounder-userdebug
     20. aosp_angler-userdebug
     21. aosp_bullhead-userdebug
     22. hikey-userdebug
     23. aosp_shamu-userdebug
     24. myproduct-userdebug

Which would you like? [aosp_arm-eng] 24

============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
TARGET_PRODUCT=myproduct
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.15.0-48-generic-x86_64-with-Ubuntu-18.04-bionic
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=N2G48H
OUT_DIR=out
============================================
  • make
pengdonglin@pengdonglin-dell:~/Android7_1$ make 
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
TARGET_PRODUCT=myproduct
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.15.0-48-generic-x86_64-with-Ubuntu-18.04-bionic
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=N2G48H
OUT_DIR=out
============================================
Running kati to generate build-myproduct.ninja...
out/build-myproduct.ninja is missing, regenerating...
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
TARGET_PRODUCT=myproduct
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.15.0-48-generic-x86_64-with-Ubuntu-18.04-bionic
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=N2G48H
OUT_DIR=out
============================================
FindEmulator: find: File system loop detected; `./linux-4.14/out64/source‘ is part of the same file system loop as `./linux-4.14‘.
FindEmulator: find: File system loop detected; `./linux-4.14/out64/source‘ is part of the same file system loop as `./linux-4.14‘.
including ./abi/cpp/Android.mk ...
including ./art/Android.mk ...
including ./bionic/Android.mk ...
including ./bootable/recovery/Android.mk ...
including ./build/libs/host/Android.mk ...
... ...

 

二、集成Linux内核源码到Android代码中

1、将Linux内核代码拷贝到Android代码根目录下并重命名为kernel

技术图片
 

2、添加AndroidKernel.mk到kernel中

AndroidKernel.mk可以参考：AndroidKernel.mk
内容如下：
#Android makefile to build kernel as a part of Android Build
PERL        = perl

KERNEL_TARGET := $(strip $(INSTALLED_KERNEL_TARGET))
ifeq ($(KERNEL_TARGET),)
INSTALLED_KERNEL_TARGET := $(PRODUCT_OUT)/kernel
endif

TARGET_KERNEL_ARCH := $(strip $(TARGET_KERNEL_ARCH))
ifeq ($(TARGET_KERNEL_ARCH),)
KERNEL_ARCH := arm
else
KERNEL_ARCH := $(TARGET_KERNEL_ARCH)
endif

TARGET_KERNEL_HEADER_ARCH := $(strip $(TARGET_KERNEL_HEADER_ARCH))
ifeq ($(TARGET_KERNEL_HEADER_ARCH),)
KERNEL_HEADER_ARCH := $(KERNEL_ARCH)
else
$(warning Forcing kernel header generation only for ‘$(TARGET_KERNEL_HEADER_ARCH)‘)
KERNEL_HEADER_ARCH := $(TARGET_KERNEL_HEADER_ARCH)
endif

KERNEL_HEADER_DEFCONFIG := $(strip $(KERNEL_HEADER_DEFCONFIG))
ifeq ($(KERNEL_HEADER_DEFCONFIG),)
KERNEL_HEADER_DEFCONFIG := $(KERNEL_DEFCONFIG)
endif

# Force 32-bit binder IPC for 64bit kernel with 32bit userspace
ifeq ($(KERNEL_ARCH),arm64)
ifeq ($(TARGET_ARCH),arm)
KERNEL_CONFIG_OVERRIDE := CONFIG_ANDROID_BINDER_IPC_32BIT=y
endif
endif

TARGET_KERNEL_CROSS_COMPILE_PREFIX := $(strip $(TARGET_KERNEL_CROSS_COMPILE_PREFIX))
ifeq ($(TARGET_KERNEL_CROSS_COMPILE_PREFIX),)
KERNEL_CROSS_COMPILE := arm-eabi-
else
KERNEL_CROSS_COMPILE := $(TARGET_KERNEL_CROSS_COMPILE_PREFIX)
endif

ifeq ($(TARGET_PREBUILT_KERNEL),)

KERNEL_GCC_NOANDROID_CHK := $(shell (echo "int main() {return 0;}" | $(KERNEL_CROSS_COMPILE)gcc -E -mno-android - > /dev/null 2>&1 ; echo $$?))
ifeq ($(strip $(KERNEL_GCC_NOANDROID_CHK)),0)
KERNEL_CFLAGS := KCFLAGS=-mno-android
endif

KERNEL_OUT := $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ
KERNEL_CONFIG := $(KERNEL_OUT)/.config

ifeq ($(KERNEL_DEFCONFIG)$(wildcard $(KERNEL_CONFIG)),)
$(error Kernel configuration not defined, cannot build kernel)
else

ifeq ($(TARGET_USES_UNCOMPRESSED_KERNEL),true)
$(info Using uncompressed kernel)
TARGET_PREBUILT_INT_KERNEL := $(KERNEL_OUT)/arch/$(KERNEL_ARCH)/boot/Image
else
ifeq ($(KERNEL_ARCH),arm64)
TARGET_PREBUILT_INT_KERNEL := $(KERNEL_OUT)/arch/$(KERNEL_ARCH)/boot/Image.gz
else
TARGET_PREBUILT_INT_KERNEL := $(KERNEL_OUT)/arch/$(KERNEL_ARCH)/boot/zImage
endif
endif

ifeq ($(TARGET_KERNEL_APPEND_DTB), true)
$(info Using appended DTB)
TARGET_PREBUILT_INT_KERNEL := $(TARGET_PREBUILT_INT_KERNEL)-dtb
endif

KERNEL_HEADERS_INSTALL := $(KERNEL_OUT)/usr
KERNEL_MODULES_INSTALL := system
KERNEL_MODULES_OUT := $(TARGET_OUT)/lib/modules

TARGET_PREBUILT_KERNEL := $(TARGET_PREBUILT_INT_KERNEL)

define mv-modules
mdpath=`find $(KERNEL_MODULES_OUT) -type f -name modules.dep`;if [ "$$mdpath" != "" ];thenmpath=`dirname $$mdpath`;ko=`find $$mpath/kernel -type f -name *.ko`;for i in $$ko; do mv $$i $(KERNEL_MODULES_OUT)/; done;fi
endef

define clean-module-folder
mdpath=`find $(KERNEL_MODULES_OUT) -type f -name modules.dep`;if [ "$$mdpath" != "" ];thenmpath=`dirname $$mdpath`; rm -rf $$mpath;fi
endef

$(KERNEL_OUT):
    mkdir -p $(KERNEL_OUT)

$(KERNEL_CONFIG): $(KERNEL_OUT)
    $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) $(KERNEL_DEFCONFIG)
    $(hide) if [ ! -z "$(KERNEL_CONFIG_OVERRIDE)" ]; then             echo "Overriding kernel config with ‘$(KERNEL_CONFIG_OVERRIDE)‘";             echo $(KERNEL_CONFIG_OVERRIDE) >> $(KERNEL_OUT)/.config;             $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) oldconfig; fi

$(TARGET_PREBUILT_INT_KERNEL): $(KERNEL_OUT) $(KERNEL_HEADERS_INSTALL)
    $(hide) echo "Building kernel..."
    $(hide) rm -rf $(KERNEL_OUT)/arch/$(KERNEL_ARCH)/boot/dts
    $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) $(KERNEL_CFLAGS)
    $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) $(KERNEL_CFLAGS) modules
    $(MAKE) -C kernel O=../$(KERNEL_OUT) INSTALL_MOD_PATH=../../$(KERNEL_MODULES_INSTALL) INSTALL_MOD_STRIP=1 ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) modules_install
    $(mv-modules)
    $(clean-module-folder)

$(KERNEL_HEADERS_INSTALL): $(KERNEL_OUT)
    $(hide) if [ ! -z "$(KERNEL_HEADER_DEFCONFIG)" ]; then             $(hide) rm -f ../$(KERNEL_CONFIG);             $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_HEADER_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) $(KERNEL_HEADER_DEFCONFIG);             $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_HEADER_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) headers_install; fi
    $(hide) if [ "$(KERNEL_HEADER_DEFCONFIG)" != "$(KERNEL_DEFCONFIG)" ]; then             echo "Used a different defconfig for header generation";             $(hide) rm -f ../$(KERNEL_CONFIG);             $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) $(KERNEL_DEFCONFIG); fi
    $(hide) if [ ! -z "$(KERNEL_CONFIG_OVERRIDE)" ]; then             echo "Overriding kernel config with ‘$(KERNEL_CONFIG_OVERRIDE)‘";             echo $(KERNEL_CONFIG_OVERRIDE) >> $(KERNEL_OUT)/.config;             $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) oldconfig; fi

kerneltags: $(KERNEL_OUT) $(KERNEL_CONFIG)
    $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) tags

kernelconfig: $(KERNEL_OUT) $(KERNEL_CONFIG)
    env KCONFIG_NOTIMESTAMP=true          $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) menuconfig
    env KCONFIG_NOTIMESTAMP=true          $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) savedefconfig
    cp $(KERNEL_OUT)/defconfig kernel/arch/$(KERNEL_ARCH)/configs/$(KERNEL_DEFCONFIG)

endif
endif

 

3、在device/mycompany/myproduct/中添加配置文件AndroidBoard.mk

这个AndroidBoard.mk文件会被build/target/board/Android.mk包含。
内容如下：
TARGET_KERNEL_ARCH := arm64
TARGET_KERNEL_CROSS_COMPILE_PREFIX := aarch64-linux-android-
TARGET_USES_UNCOMPRESSED_KERNEL := true

KERNEL_DEFCONFIG := defconfig

include kernel/AndroidKernel.mk

$(INSTALLED_KERNEL_TARGET): $(TARGET_PREBUILT_KERNEL) | $(ACP)
    $(transform-prebuilt-to-target)

4、修改device/mycompany/myproduct/BoardConfig.mk

将TARGET_NO_KERNEL的值修改为false。
技术图片

5、编译

. build/envsetup.sh
lunch 24
make bootimage

技术图片

6、添加kernelclean目标

在进行clean的时候，没有必要include那些Android.mk，可以加快执行速度，在build/core/main.mk中提供了一个变量dont_bother_goals，其中的目标在编译时会略过加载Android.mk。
修改build/core/main.mk：
diff --git a/core/main.mk b/core/main.mk
index a612f835d..e333a17d5 100644
--- a/core/main.mk
+++ b/core/main.mk
@@ -87,6 +87,8 @@ dont_bother_goals := clean clobber dataclean installclean      recoveryimage-nodeps      product-graph dump-products
 
+dont_bother_goals += kernel-clean
+
 ifneq ($(filter $(dont_bother_goals), $(MAKECMDGOALS)),)
 dont_bother := true
 endif
@@ -1115,6 +1117,11 @@ clean:
        @rm -rf $(OUT_DIR)/*
        @echo "Entire build directory removed."
 
+.PHONY: kernel-clean
+kernel-clean:
+       @echo "Cleaning kernel..."
+       @rm -rf $(PRODUCT_OUT)/obj/KERNEL_OBJ/
+
 .PHONY: clobber
 clobber: clean
 
测试
pengdonglin@pengdonglin-dell:~/Android7_1$ make kernel-clean
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
TARGET_PRODUCT=myproduct
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.15.0-50-generic-x86_64-with-Ubuntu-18.04-bionic
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=N2G48H
OUT_DIR=out
============================================
Running kati to generate build-myproduct-kernel-clean.ninja...
No need to regenerate ninja file
Starting build with ninja
ninja: Entering directory `.‘
[100% 1/1] Cleaning kernel...

#### make completed successfully (2 seconds) ####

 

三、将U-Boot代码集成到Android编译系统中

1、将u-boot-2018.09拷贝到bootable下，并重命名为u-boot

2、在u-boot下添加AndroidU-boot.mk

U-BOOT_TARGET := $(strip $(INSTALLED_U-BOOT_TARGET))
ifeq ($(U-BOOT_TARGET),)
INSTALLED_U-BOOT_TARGET := $(PRODUCT_OUT)/u-boot.bin
endif

TARGET_U-BOOT_ARCH := $(strip $(TARGET_U-BOOT_ARCH))

TARGET_U-BOOT_CROSS_COMPILE_PREFIX := $(strip $(TARGET_U-BOOT_CROSS_COMPILE_PREFIX))

U-BOOT_DEFCONFIG := $(strip $(U-BOOT_DEFCONFIG))
U-BOOT_OUT := $(TARGET_OUT_INTERMEDIATES)/U-BOOT_OBJ
U-BOOT_CONFIG := $(U-BOOT_OUT)/.config

TARGET_PREBUILT_INT_U-BOOT := $(U-BOOT_OUT)/u-boot.bin

TARGET_PREBUILT_U-BOOT := $(TARGET_PREBUILT_INT_U-BOOT)

$(U-BOOT_OUT):
    mkdir -p $(U-BOOT_OUT)

$(U-BOOT_CONFIG): $(U-BOOT_OUT)
    $(MAKE) -C bootable/u-boot O=../../$(U-BOOT_OUT) ARCH=$(TARGET_U-BOOT_ARCH) CROSS_COMPILE=$(TARGET_U-BOOT_CROSS_COMPILE_PREFIX) $(U-BOOT_DEFCONFIG)

$(TARGET_PREBUILT_INT_U-BOOT): $(U-BOOT_OUT) $(U-BOOT_CONFIG)
    $(hide) echo "Building u-boot..."
    $(MAKE) -C bootable/u-boot O=../../$(U-BOOT_OUT) ARCH=$(TARGET_U-BOOT_ARCH) CROSS_COMPILE=$(TARGET_U-BOOT_CROSS_COMPILE_PREFIX)

3、修改device/mycompany/myproduct/AndroidBoard.mk

追加如下内容:
TARGET_U-BOOT_ARCH := arm
TARGET_U-BOOT_CROSS_COMPILE_PREFIX := aarch64-linux-android-
U-BOOT_DEFCONFIG := qemu_arm64_defconfig

include bootable/u-boot/AndroidU-boot.mk

$(INSTALLED_U-BOOT_TARGET): $(TARGET_PREBUILT_U-BOOT) | $(ACP)
    $(transform-prebuilt-to-target)

4、修改device/mycompany/myproduct/BoardConfig.mk

添加如下内容:
TARGET_NO_U-BOOT := false

5、修改build/core/Makefile

diff --git a/core/Makefile b/core/Makefile
index d8b4ef89b..4b8f8f559 100644
--- a/core/Makefile
+++ b/core/Makefile
@@ -464,6 +464,11 @@ ifneq ($(strip $(TARGET_NO_KERNEL)),true)
 else
   INSTALLED_KERNEL_TARGET :=
 endif
+ifneq ($(strip $(TARGET_NO_U-BOOT)),true)
+  INSTALLED_U-BOOT_TARGET := $(PRODUCT_OUT)/u-boot.bin
+else
+  INSTALLED_U-BOOT_TARGET :=
+endif
 
 # -----------------------------------------------------------------
 # the ramdisk

6、修改build/core/main.mk

diff --git a/core/main.mk b/core/main.mk
index a612f835d..bac8ef18d 100644
--- a/core/main.mk
+++ b/core/main.mk
@@ -87,6 +87,9 @@ dont_bother_goals := clean clobber dataclean installclean      recoveryimage-nodeps      product-graph dump-products
 
+dont_bother_goals += u-boot-clean
+dont_bother_goals += kernel-clean
+
 ifneq ($(filter $(dont_bother_goals), $(MAKECMDGOALS)),)
 dont_bother := true
 endif
@@ -907,6 +910,9 @@ endif
 .PHONY: ramdisk
 ramdisk: $(INSTALLED_RAMDISK_TARGET)
 
+.PHONY: u-boot
+u-boot: $(INSTALLED_U-BOOT_TARGET)
+
 .PHONY: systemtarball
 systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET)
 
@@ -1115,6 +1121,16 @@ clean:
        @rm -rf $(OUT_DIR)/*
        @echo "Entire build directory removed."
 
+.PHONY: u-boot-clean
+u-boot-clean:
+       @echo "Cleaning u-boot..."
+       @rm -rf $(PRODUCT_OUT)/obj/U-BOOT_OBJ/
+
+.PHONY: kernel-clean
+kernel-clean:
+       @echo "Cleaning kernel..."
+       @rm -rf $(PRODUCT_OUT)/obj/KERNEL_OBJ/
+
 .PHONY: clobber
 clobber: clean

7、测试

. build/envsetup.sh
lunch 24
make u-boot
OBJCOPY examples/standalone/hello_world.srec
  OBJCOPY examples/standalone/hello_world.bin
  LD      u-boot
  OBJCOPY u-boot.srec
  OBJCOPY u-boot-nodtb.bin
  SYM     u-boot.sym
start=$(aarch64-linux-android-nm u-boot | grep __rel_dyn_start | cut -f 1 -d ‘ ‘); end=$(aarch64-linux-android-nm u-boot | grep __rel_dyn_end | cut -f 1 -d ‘ ‘); tools/relocate-rela u-boot-nodtb.bin 0x00000000 $start $end
  COPY    u-boot.bin
  CFGCHK  u-boot.cfg
make[1]: Leaving directory ‘/home/pengdonglin/Android7_1/out/target/product/myproduct/obj/U-BOOT_OBJ‘
make: Leaving directory ‘/home/pengdonglin/Android7_1/bootable/u-boot‘
[100% 4/4] target Prebuilt:  (out/target/product/myproduct/u-boot.bin)
 
make u-boot-clean
pengdonglin@pengdonglin-dell:~/Android7_1$ make u-boot-clean
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
TARGET_PRODUCT=myproduct
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.15.0-50-generic-x86_64-with-Ubuntu-18.04-bionic
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=N2G48H
OUT_DIR=out
============================================
Running kati to generate build-myproduct-u-boot-clean.ninja...
No need to regenerate ninja file
Starting build with ninja
ninja: Entering directory `.‘
[100% 1/1] Cleaning u-boot...

#### make completed successfully  ####

 

完。

将linux和uboot集成到Android编译框架中

标签：oca   theme   uri   poi   source   HERE   aos   complete   break   

原文地址：https://www.cnblogs.com/pengdonglin137/p/10888727.html
踩
(0)
赞
(0)
   
举报
评论 一句话评论（0）
登录后才能评论！
分享档案
更多>
2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)
周排行
mamicode.com排行更多图片
更多
友情链接
兰亭集智   国之画   百度统计   站长统计   阿里云   chrome插件   新版天听网
关于我们 - 联系我们 - 留言反馈
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码！