Linux驱动知识：中断

标签：his   dom   isa   result   des   sse   x86   UNC   style   

These symbols related to interrupt management were introduced in this chapter:

#include <linux/interrupt.h>
int request_irq(unsigned int irq, irqreturn_t (*handler)( ), unsigned long flags, const char *dev_name, void *dev_id); 
void free_irq(unsigned int irq, void *dev_id);

Calls that register and unregister an interrupt handler.

dev_name为显示在/proc/interrupts中的名字

dev_id为回调中断处理程序时所给的参数，通常为本地dev结构的地址指针。

#include <linux/irq.h.h>
int can_request_irq(unsigned int irq, unsigned long flags);

This function, available on the i386 and x86_64 architectures, returns a nonzero value if an attempt to allocate the given interrupt line succeeds.

#include <asm/signal.h>

SA_INTERRUPT
SA_SHIRQ
SA_SAMPLE_RANDOM

Flags for request_irq. SA_INTERRUPT requests installation of a fast handler (as opposed to a slow one). SA_SHIRQ installs a shared handler, and the third flag asserts that interrupt timestamps can be used to generate system entropy.

Modern hardware, of course, has been designed to allow the sharing of interrupts; the PCI bus requires it.

/proc/interrupts

/proc/stat

Filesystem nodes that report information about hardware interrupts and installed handlers.

unsigned long probe_irq_on(void);
int probe_irq_off(unsigned long);

Functions used by the driver when it has to probe to determine which interrupt line is being used by a device. The result of probe_irq_onmust be passed back to probe_irq_off after the interrupt has been generated. The return value of probe_irq_off is the detected interrupt number.

The programmer should be careful to enable interrupts on the device after the call to probe_irq_on and to disable them before callingprobe_irq_off

IRQ_NONE
IRQ_HANDLED
IRQ_RETVAL(int x)

The possible return values from an interrupt handler, indicating whether an actual interrupt from the device was present.

void disable_irq(int irq);        //关中断且等待当前的中断处理程序完成
void disable_irq_nosync(int irq); //不等待，有风险
void enable_irq(int irq);

A driver can enable and disable interrupt reporting. If the hardware tries to generate an interrupt while interrupts are disabled, the interrupt is lost forever. A driver using a shared handler must not use these functions.

void local_irq_save(unsigned long flags);
void local_irq_restore(unsigned long flags);

Use local_irq_save to disable interrupts on the local processor and remember their previous state. The flags can be passed to local_irq_restore to restore the previous interrupt state.

void local_irq_disable(void);
void local_irq_enable(void);

Functions that unconditionally disable and enable interrupts on the current processor.

Linux驱动知识：中断

标签：his   dom   isa   result   des   sse   x86   UNC   style   

原文地址：https://www.cnblogs.com/realplay/p/10912696.html