kubernetes集群安装指南：master组件kube-controller-manager部署

标签：linu   parameter   eal   efault   集群模式   auth   alpha   eric   ade   

1 安装准备

特别说明：这里所有的操作都是在devops这台机器上执行

1.1 环境变量定义

#################### Variable parameter setting ######################
KUBE_NAME=kube-controller-manager
K8S_INSTALL_PATH=/data/apps/k8s/kubernetes
K8S_BIN_PATH=${K8S_INSTALL_PATH}/sbin
K8S_LOG_DIR=${K8S_INSTALL_PATH}/logs
K8S_CONF_PATH=/etc/k8s/kubernetes
KUBE_CONFIG_PATH=/etc/k8s/kubeconfig
CA_DIR=/etc/k8s/ssl
SOFTWARE=/root/software
VERSION=v1.14.2
PACKAGE="kubernetes-server-${VERSION}-linux-amd64.tar.gz"
DOWNLOAD_URL=“”https://github.com/devops-apps/download/raw/master/kubernetes/${PACKAGE}"
ETCD_ENDPOIDS=https://10.10.10.22:2379,https://10.10.10.23:2379,https://10.10.10.24:2379
ETH_INTERFACE=eth1
LISTEN_IP=$(ifconfig | grep -A 1 ${ETH_INTERFACE} |grep inet |awk ‘{print $2}‘)
USER=k8s
SERVICE_CIDR=10.254.0.0/22

1.2 下载和分发 kubernetes 二进制文件

访问kubernetes github 官方地址下载稳定的 realease 包至本机；

wget  $DOWNLOAD_URL -P $SOFTWARE

将kubernetes 软件包分发到各个master节点服务器；

sudo ansible master_k8s_vgs -m copy -a "src=${SOFTWARE}/$PACKAGE dest=${SOFTWARE}/" -b

2 部署kube-controller-manager集群

2.1 安装kube-controller-manager二进制文件

### 1.Check if the install directory exists.
if [ ! -d "$K8S_BIN_PATH" ]; then
     mkdir -p $K8S_BIN_PATH
fi

if [ ! -d "$K8S_LOG_DIR/$KUBE_NAME" ]; then
     mkdir -p $K8S_LOG_DIR/$KUBE_NAME
fi

if [ ! -d "$K8S_CONF_PATH" ]; then
     mkdir -p $K8S_CONF_PATH
fi

if [ ! -d "$KUBE_CONFIG_PATH" ]; then
     mkdir -p $KUBE_CONFIG_PATH
fi

### 2.Install kube-apiserver binary of kubernetes.
if [ ! -f "$SOFTWARE/kubernetes-server-${VERSION}-linux-amd64.tar.gz" ]; then
     wget $DOWNLOAD_URL -P $SOFTWARE >>/tmp/install.log  2>&1
fi
cd $SOFTWARE && tar -xzf kubernetes-server-${VERSION}-linux-amd64.tar.gz -C ./
cp -fp kubernetes/server/bin/$KUBE_NAME $K8S_BIN_PATH
ln -sf  $K8S_BIN_PATH/$KUBE_NAM /usr/local/bin
chown -R $USER:$USER $K8S_INSTALL_PATH
chmod -R 755 $K8S_INSTALL_PATH

2.2 分发 kubeconfig 文件和证书

分发证书

sudo ansible master_k8s_vgs -m  synchronize -a   "src=${CA_DIR}/kube-scheduler*   dest=${K8S_KUBECONFIG_PATH}/ mode=push delete=yes rsync_opts=-avz" -b

分发kubeconfig认证文件

kube-controller-manager使用 kubeconfig文件连接访问 apiserver服务，该文件提供了 apiserver 地址、嵌入的 CA 证书和 kube-scheduler证书：

sudo ansible master_k8s_vgs -m  synchronize -a   "src=${K8S_KUBECONFIG_PATH}/   dest=${K8S_KUBECONFIG_PATH}/ mode=push delete=yes rsync_opts=-avz" -b

备注： 如果在前面小节已经同步过各组件kubeconfig和证书文件，此处可以不必执行此操作；

2.3 创建kube-controller-manager启动服务

cat >/usr/lib/systemd/system/${KUBE_NAME}.service<<EOF
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
[Service]
User=${USER}
WorkingDirectory=${K8S_INSTALL_PATH}
ExecStart=${K8S_BIN_PATH}/${KUBE_NAME} \  --port=10252 \  --secure-port=10257 \  --bind-address=${LISTEN_IP} \  --address=127.0.0.1 \  --kubeconfig=${KUBE_CONFIG_PATH}/${KUBE_NAME}.kubeconfig \  --authentication-kubeconfig=${KUBE_CONFIG_PATH}/${KUBE_NAME}.kubeconfig \  --authorization-kubeconfig=${KUBE_CONFIG_PATH}/${KUBE_NAME}.kubeconfig \  --client-ca-file=${CA_DIR}/ca.pem \  --service-cluster-ip-range=${SERVICE_CIDR} \  --cluster-name=kubernetes \  --cluster-signing-cert-file=${CA_DIR}/ca.pem \  --cluster-signing-key-file=${CA_DIR}/ca-key.pem \  --root-ca-file=${CA_DIR}/ca.pem \  --service-account-private-key-file=${CA_DIR}/ca-key.pem \  --leader-elect=true \  --feature-gates=RotateKubeletServerCertificate=true \  --horizontal-pod-autoscaler-use-rest-clients=true \  --horizontal-pod-autoscaler-sync-period=10s \  --concurrent-service-syncs=2 \  --kube-api-qps=1000 \  --kube-api-burst=2000 \  --concurrent-gc-syncs=30 \  --concurrent-deployment-syncs=10 \  --terminated-pod-gc-threshold=10000 \  --controllers=*,bootstrapsigner,tokencleaner \  --requestheader-allowed-names="" \  --requestheader-client-ca-file=${CA_DIR}/ca.pem \  --requestheader-extra-headers-prefix="X-Remote-Extra-" \  --requestheader-group-headers=X-Remote-Group \  --requestheader-username-headers=X-Remote-User \  --tls-cert-file=${CA_DIR}/kube-controller-manager.pem \  --tls-private-key-file=${CA_DIR}/kube-controller-manager-key.pem \  --use-service-account-credentials=true \  --alsologtostderr=true \  --logtostderr=false \  --log-dir=${K8S_LOG_DIR}/${KUBE_NAME} \  --flex-volume-plugin-dir=${K8S_INSTALL_PATH}/libexec/kubernetes \  --v=2
Restart=on
Restart=on-failure
RestartSec=5
[Install]
WantedBy=multi-user.target
EOF

• --port=0：关闭监听非安全端口（http），同时 --address 参数无效，--bind-address 参数有效；
• --secure-port=10252、--bind-address=0.0.0.0: 在所有网络接口监听 10252 端口的 https /metrics 请求；
• --kubeconfig：指定 kubeconfig 文件路径，kube-controller-manager 使用它连接和验证 kube-apiserver；
• --authentication-kubeconfig 和 --authorization-kubeconfig：kube-controller-manager 使用它连接 apiserver，对 client 的请求进行认证和授权。kube-controller-manager 不再使用 --tls-ca-file 对请求 https metrics 的 Client 证书进行校验。如果没有配置这两个 kubeconfig 参数，则 client 连接 kube-controller-manager https 端口的请求会被拒绝(提示权限不足)。
• --cluster-signing-*-file：签名 TLS Bootstrap 创建的证书；
• --experimental-cluster-signing-duration：指定 TLS Bootstrap 证书的有效期；
• --root-ca-file：放置到容器 ServiceAccount 中的 CA 证书，用来对 kube-apiserver 的证书进行校验；
• --service-account-private-key-file：签名 ServiceAccount 中 Token 的私钥文件，必须和 kube-apiserver 的 --service-account-key-file 指定的公钥文件配对使用；
• --service-cluster-ip-range ：指定 Service Cluster IP 网段，必须和 kube-apiserver 中的同名参数一致；
• --leader-elect=true：集群运行模式，启用选举功能；被选为 leader 的节点负责处理工作，其它节点为阻塞状态；
• --controllers=*,bootstrapsigner,tokencleaner：启用的控制器列表，tokencleaner 用于自动清理过期的 Bootstrap token；
• --horizontal-pod-autoscaler-*：custom metrics 相关参数，支持 autoscaling/v2alpha1；
• --tls-cert-file、--tls-private-key-file：使用 https 输出 metrics 时使用的 Server 证书和秘钥；
• --use-service-account-credentials=true: kube-controller-manager 中各 controller 使用 serviceaccount 访问 kube-apiserver；

2.4 检查服务运行状态

kube-controller-manager监听10252和10257端口，两个接口都对外提供 /metrics 和 /healthz 的访问。

• 10252：接收 http 请求访问，非安全端口，不需要认证授权，为了安全建议侦听地址为127.0.0.1；
• 10257：接收 https 请求访问，安全端口，需要认证授权，可以侦听任何地址；

  sudo netstat -ntlp | grep kube-con
  tcp  0      0 127.0.0.1:10252         0.0.0.0:*      LISTEN      2450/kube-controlle 
  tcp  0      0 10.10.10.22:10257       0.0.0.0:*      LISTEN      2450/kube-controlle 

注意：很多安装文档都是关闭了非安全端口，将安全端口改为10250，这会导致查看集群状态是报如下错误，执行 kubectl get cs命令时，apiserver 默认向 127.0.0.1 发送请求。当controller-manager、scheduler以集群模式运行时，有可能和kube-apiserver不在一台机器上，且访问方式为https，则 controller-manager或scheduler 的状态为 Unhealthy，但实际上它们工作正常。则会导致上述error，但实际集群是安全状态；

kubectl get componentstatuses
NAME                 STATUS      MESSAGE    ERROR
controller-manager  Unhealthy  dial tcp  127.0.0.1:10252: connect: connection refused
scheduler          Unhealthy  dial tcp  127.0.0.1:10251: connect: connection refused
etcd-0               Healthy     {"health":"true"}
etcd-2               Healthy     {"health":"true"}
etcd-1               Healthy     {"health":"true"}

正常输出应该为：
NAME                 STATUS    MESSAGE             ERROR
scheduler            Healthy   ok                  
controller-manager   Healthy   ok                  
etcd-2               Healthy   {"health":"true"}   
etcd-1               Healthy   {"health":"true"}   
etcd-0               Healthy   {"health":"true"}   

查看服务是否运行

systemctl status kube-controller-manager|grep Active

确保状态为 active (running)，否则查看日志，确认原因：

sudo journalctl -u kube-controller-manager

2.5 查看输出的 metrics

注意：以下命令在 kube-controller-manager 节点上执行。

https方式访问
curl -s --cacert /opt/k8s/work/ca.pem   --cert /opt/k8s/work/admin.pem   --key /opt/k8s/work/admin-key.pem   https://10.10.10.22:10257/metrics |head

http方式访问
curl -s http://127.0.0.1:10252/metrics |head

2.6 kube-controller-manager 的权限设置

ClusteRole system:kube-controller-manager 的权限很小，只能创建 secret、serviceaccount 等资源对象，各 controller 的权限分散到 ClusterRole system:controller:XXX 中：

 $ kubectl describe clusterrole system:kube-controller-manager
Name:         system:kube-controller-manager
Labels:       kubernetes.io/bootstrapping=rbac-defaults
Annotations:  rbac.authorization.kubernetes.io/autoupdate=true
PolicyRule:
  Resources                  Non-Resource URLs  Resource Names  Verbs
  ---------                  -----------------  --------------  -----
  secrets                                   []   []    [create delete get update]
  endpoints                                 []   []    [create get update]
  serviceaccounts                           []   []    [create get update]
  events                                    []   []    [create patch update]
  tokenreviews.authentication.k8s.io        []   []    [create]
  subjectacce***eviews.authorization.k8s.io []   []    [create]
  configmaps                                []   []    [get]
  namespaces                                []   []    [get]
  *.*                                       []   []    [list watch]

需要在kube-controller-manager的启动参数中添加"--use-service-account-credentials=true"参数,这样main controller将会为各controller创建对应的ServiceAccount XXX-controller。然后内置的 ClusterRoleBinding system:controller:XXX则将赋予各XXX-controller ServiceAccount对应的ClusterRole system:controller:XXX 权限。

 $ kubectl get clusterrole|grep controller
system:controller:attachdetach-controller                              17d
system:controller:certificate-controller                               17d
system:controller:clusterrole-aggregation-controller                   17d
system:controller:cronjob-controller                                   17d
system:controller:daemon-set-controller                                17d
system:controller:deployment-controller                                17d
system:controller:disruption-controller                                17d
system:controller:endpoint-controller                                  17d
system:controller:expand-controller                                    17d
system:controller:generic-garbage-collector                            17d
system:controller:horizontal-pod-autoscaler                            17d
system:controller:job-controller                                       17d
system:controller:namespace-controller                                 17d
system:controller:node-controller                                      17d
system:controller:persistent-volume-binder                             17d
system:controller:pod-garbage-collector                                17d
system:controller:pv-protection-controller                             17d
system:controller:pvc-protection-controller                            17d
system:controller:replicaset-controller                                17d
system:controller:replication-controller                               17d
system:controller:resourcequota-controller                             17d
system:controller:route-controller                                     17d
system:controller:service-account-controller                           17d
system:controller:service-controller                                   17d
system:controller:statefulset-controller                               17d
system:controller:ttl-controller                                       17d
system:kube-controller-manager                                         17d

以 deployment controller 为例：

$ kubectl describe clusterrole system:controller:deployment-controller
Name:         system:controller:deployment-controller
Labels:       kubernetes.io/bootstrapping=rbac-defaults
Annotations:  rbac.authorization.kubernetes.io/autoupdate=true
PolicyRule:
  Resources                        Non-Resource URLs  Resource Names  Verbs
  ---------                        -----------------  --------------  -----
  replicasets.apps                 []   []  [create delete get list patch update watch]
  replicasets.extensions           []   []  [create delete get list patch update watch]
  events                           []   []  [create patch update]
  pods                             []   []  [get list update watch]
  deployments.apps                 []   []  [get list update watch]
  deployments.extensions           []   []  [get list update watch]
  deployments.apps/finalizers      []   []  [update]
  deployments.apps/status          []   []  [update]
  deployments.extensions/finalizers[]   []  [update]
  deployments.extensions/status    []   []  [update]

2.7 查看当前的 leader

kubectl get endpoints kube-controller-manager --namespace=kube-system -o yaml

2.8 测试kube-controller-manager集群的高可用

随机找一个或两个 master 节点，停掉kube-controller-manager服务，看其它节点是否获取了 leader 权限.

参考

关于 controller 权限和 use-service-account-credentials 参数：
https://github.com/kubernetes/kubernetes/issues/48208
kubelet 认证和授权：
https://kubernetes.io/docs/admin/kubelet-authentication-authorization/#kubelet-authorization

kubernetes集群安装指南：master组件kube-controller-manager部署

标签：linu   parameter   eal   efault   集群模式   auth   alpha   eric   ade   

原文地址：https://blog.51cto.com/blief/2417084