码迷,mamicode.com
首页 > 系统相关 > 详细

Linux下 keepalived 的安装和配置

时间:2019-08-18 19:47:54      阅读:114      评论:0      收藏:0      [点我收藏+]

标签:影响   pad   查看   sof   keep   返回   bin   nload   不能   

@(终于等到你)

安装前准备

基础系统:CentOS 7

yum -y install gcc gcc-c++ autoconf automake make 
yum -y install zlib zlib-devel openssl openssl-devel pcre pcre-devel

1.下载keepalived

方法一:

yum -y install keepalived

方法二
下载二进制源码包:http://www.keepalived.org/download.html

#下载安装文件

cd /usr/local
wget http://www.keepalived.org/software/keepalived-2.0.18.tar.gz
#解压文件
tar -zxvf keepalived-2.0.18.tar.gz
#编译
cd keepalived-2.0.18/
#--prefix 指定安装地址
#/usr/local/keepalived/ 安装的目录,不要和自己安装文件一个目录,不然报错
./configure --prefix=/usr/local/keepalived/
#编译并安装
 make && make install

2.配置

复制文件:

[root@localhost ~]# cp /usr/local/keepalived-2.0.18/keepalived/etc/init.d/keepalived /etc/init.d/
[root@localhost ~]# mkdir /etc/keepalived
[root@localhost ~]# cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
[root@localhost ~]# cp /usr/local/keepalived-2.0.18/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
[root@localhost ~]# cp /usr/local/keepalived/sbin/keepalived /usr/sbin/

编辑:

vi /etc/keepalived/keepalived.conf

/etc/keepalived/keepalived.conf内容如下

global_defs {
    notification_email {
        #mr@mruse.cn       # 指定keepalived在发生切换时需要发送email到的对象,一行一个
        #sysadmin@firewall.loc
    }
    notification_email_from xxx@163.com   # 指定发件人
    smtp_server smtp@163.com              # smtp 服务器地址
    smtp_connect_timeout 30               # smtp 服务器连接超时时间
    router_id LVS_1 # 必填,标识本节点的字符串,通常为hostname,但不一定非得是hostname,故障发生时,邮件通知会用到
    }

vrrp_script chk_tomcat {                    #详细看下面
    script "/etc/keepalived/tomcat_check.sh"            #检测服务shell
    interval 2                                  #每个多长时间探测一次
    weight -20                                          #每个多长时间探测一次                                             
}

_instance VI_1 {  # 实例名称
    state MASTER      #  必填,可以是MASTER或BACKUP,不过当其他节点keepalived启动时会将priority比较大的节点选举为MASTER
    interface ens33    #  必填, 节点固有IP(非VIP)的网卡,用来发VRRP包做心跳检测
    mcast_src_ip 192.168.2.89 #本机的ip,需要修改
    virtual_router_id 101 #  必填,虚拟路由ID,取值在0-255之间,用来区分多个instance的VRRP组播,同一网段内ID不能重复;主备必须为一样;
    priority 100      #  必填,用来选举master的,要成为master那么这个选项的值最好高于其他机器50个点,该项取值范围是1-255(在此范围之外会被识别成默认值100)
    advert_int 1      #  必填,检查间隔默认为1秒,即1秒进行一次master选举(可以认为是健康查检时间间隔)
    authentication {  #  必填,认证区域,认证类型有PASS和HA(IPSEC),推荐使用PASS(密码只识别前8位)
        auth_type PASS  # 默认是PASS认证
        auth_pass 1111 # PASS认证密码
    }
    virtual_ipaddress {
        192.168.2.90    #  必填,虚拟VIP地址,允许多个
    }
    track_script {       # 检测shell                          
        chk_tomcat
    }
}

vrrp_script 里的script返回值为0时认为检测成功其它值都会当成检测失败

  1. weight 为正时脚本检测成功时此weight会加到priority上,检测失败时不加;
    A.主失败:主 priority < 从 priority + weight 时会切换。
    B.主成功:主 priority + weight > 从 priority + weight 时,主依然为主
  2. weight 为负时脚本检测成功时此weight不影响priority,检测失败时priority – abs(weight)
    A.主失败:主 priority – abs(weight) < 从priority 时会切换主从
    主成功:主 priority > 从priority 主依然为主

检测shell:/etc/keepalived/tomcat_check.sh 可以根据 tomcat 服务检测结果返回不同的值,成功执行 exit 0 返回 0,失败执行 exit 1 返回 1,vrrp_script 可以结合返回值来对当前keepalived优先级做处理

3.开启服务

设置 keepalived 服务开机启动

# chkconfig keepalived on  
# 启动keepalived 服务
# service keepalived start 

查看keepalived进程,出现如下三个进程即为启动成功

[root@localhost ~]# ps -ef | grep keep
root       7925      1  0 11:27 ?        00:00:00 /usr/local/keepalived/sbin/keepalived -D
root       7926      1  0 11:27 ?        00:00:00 /usr/local/keepalived/sbin/keepalived -D
root       7927   7926  0 11:27 ?        00:00:00 /usr/local/keepalived/sbin/keepalived -D
root       7956   7888  0 12:02 pts/1    00:00:00 grep --color=auto keep

4.指定日志的输出文件

修改 /etc/sysconfig

vim  /etc/sysconfig
#指定位置修改为如下内容
KEEPALIVED_OPTIONS="-D -d -S 0"

修改 /etc/rsyslog.conf

vim /etc/rsyslog.conf
#在最后一行添加如下内容
local0.* /var/log/keepalived.log

重启服务测试

service rsyslog restart
service rsyslog restart

#如下命令有日志内容输出即为成功
tailf /var/log/keepalived.log

#centos 基本可以成功,但是 debain 可能失败,失败上面 2 个文件可以改为如下内容,再重启服务测试
KEEPALIVED_OPTIONS="-D -d -S 1"
local1.* /var/log/keepalived.log

参考:https://blog.csdn.net/weixin_33845881/article/details/86016142

如果有哪些不对的地方烦请指认,先行感谢

Linux下 keepalived 的安装和配置

标签:影响   pad   查看   sof   keep   返回   bin   nload   不能   

原文地址:https://www.cnblogs.com/charmsongo/p/11373335.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!