Mac下配置svn服务器

标签：des   style   http   color   io   os   ar   使用   for   

Mac自带了svn服务端和客户端，所以只需要简单配置一下就可以使用。

1、创建svn repository

Shell代码  

1. svnadmin create /Users/qiruihua/svnserver/repository  

2、配置svn用户权限/Users/qiruihua/svnserver/repository/conf/目录下存在3个文件：authz、passwd、svnserve.conf

authz，内容如下：

Mac代码  

1. ### This file is an example authorization file for svnserve.
   ### Its format is identical to that of mod_authz_svn authorization
   ### files.
   ### As shown below each section defines authorizations for the path and
   ### (optional) repository specified by the section name.
   ### The authorizations follow. An authorization line can refer to:
   ###  - a single user,
   ###  - a group of users defined in a special [groups] section,
   ###  - an alias defined in a special [aliases] section,
   ###  - all authenticated users, using the ‘$authenticated‘ token,
   ###  - only anonymous users, using the ‘$anonymous‘ token,
   ###  - anyone, using the ‘*‘ wildcard.
   ###
   ### A match can be inverted by prefixing the rule with ‘~‘. Rules can
   ### grant read (‘r‘) access, read-write (‘rw‘) access, or no access
   ### (‘‘).
   
   
   [aliases]
   # joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average
   
   
   [groups]
   # harry_and_sally = harry,sally
   # harry_sally_and_joe = harry,sally,&joe
   
   
   # [/foo/bar]
   # harry = rw
   # &joe = r
   # * =
   
   
   # [repository:/baz/fuz]
   # @harry_and_sally = rw
   # * = r
   

passwd，内容如下：

Mac代码  

1. ### This file is an example password file for svnserve.
   ### Its format is similar to that of svnserve.conf. As shown in the
   ### example below it contains one section labelled [users].
   ### The name and password for each user follow, one account per line.
   
   
   [users]
   qiruihua=123
   

svnserve.conf，内容如下：

Mac代码  

1. ### This file controls the configuration of the svnserve daemon, if you
   ### use it to allow access to this repository.  (If you only allow
   ### access through http: and/or file: URLs, then this file is
   ### irrelevant.)
   
   
   ### Visit http://subversion.apache.org/ for more information.
   
   
   [general]
   ### The anon-access and auth-access options control access to the
   ### repository for unauthenticated (a.k.a. anonymous) users and
   ### authenticated users, respectively.
   ### Valid values are "write", "read", and "none".
   ### Setting the value to "none" prohibits both reading and writing;
   ### "read" allows read-only access, and "write" allows complete 
   ### read/write access to the repository.
   ### The sample settings below are the defaults and specify that anonymous
   ### users have read-only access to the repository, while authenticated
   ### users have read and write access to the repository.
   # anon-access = read
   # auth-access = write
   ### The password-db option controls the location of the password
   ### database file.  Unless you specify a path starting with a /,
   ### the file‘s location is relative to the directory containing
   ### this configuration file.
   ### If SASL is enabled (see below), this file will NOT be used.
   ### Uncomment the line below to use the default password file.
   # password-db = passwd
   ### The authz-db option controls the location of the authorization
   ### rules for path-based access control.  Unless you specify a path
   ### starting with a /, the file‘s location is relative to the the
   ### directory containing this file.  If you don‘t specify an
   ### authz-db, no path-based access control is done.
   ### Uncomment the line below to use the default authorization file.
   # authz-db = authz
   ### This option specifies the authentication realm of the repository.
   ### If two repositories have the same authentication realm, they should
   ### have the same password database, and vice versa.  The default realm
   ### is repository‘s uuid.
   # realm = My First Repository
   ### The force-username-case option causes svnserve to case-normalize
   ### usernames before comparing them against the authorization rules in the
   ### authz-db file configured above.  Valid values are "upper" (to upper-
   ### case the usernames), "lower" (to lowercase the usernames), and
   ### "none" (to compare usernames as-is without case conversion, which
   ### is the default behavior).
   # force-username-case = none
   
   
   [sasl]
   ### This option specifies whether you want to use the Cyrus SASL
   ### library for authentication. Default is false.
   ### This section will be ignored if svnserve is not built with Cyrus
   ### SASL support; to check, run ‘svnserve --version‘ and look for a line
   ### reading ‘Cyrus SASL authentication is available.‘
   # use-sasl = true
   ### These options specify the desired strength of the security layer
   ### that you want SASL to provide. 0 means no encryption, 1 means
   ### integrity-checking only, values larger than 1 are correlated
   ### to the effective key length for encryption (e.g. 128 means 128-bit
   ### encryption). The values below are the defaults.
   # min-encryption = 0
   # max-encryption = 256
   

3、启动服务器

Mac代码  

1. svnserve -d -r /Users/qiruihua/svnserver/repository  

没有任何提示就说明启动成功了。

4、将项目导入svn库

Mac代码  

1. svn import /Users/qiruihua/projects/demo/ svn://localhost/svn/repository/demo --username qiruihua --password 123 -m "Initial import"  

5、签出项目

Mac代码  

1. svn checkout svn://127.0.0.1/svn/repository/demo --username=qiruihua --password=123 

Mac下配置svn服务器

标签：des   style   http   color   io   os   ar   使用   for   

原文地址：http://blog.csdn.net/qi_ruihua/article/details/40475927