标签：基础上 oca == rect 引用计数 对象引用 iobuffer ali 次数
问题 ：
netty ByteBuf 存在两个指针，分成三个区域: 已读区（可丢弃），未读区（未读），可写区 。不像之前JDK 的 ByteBuffer 中只有一个position 指针。例如以下示例 ：
public static void main(String[] args){
ByteBuffer buffer = ByteBuffer.allocate(88);
String value = "Netty~~";
buffer.put(value.getBytes());
//注意这个flip()方法，要是不调用，将读取到不正确的位置
buffer.flip();
byte[] vArray = new byte[buffer.remaining()];
buffer.get(vArray);
String result = new String(vArray);
System.out.println(result);
}
概述一下netty ByteBuff 的特点 ：
内存池，循环利用创建的 ByteBuf 对象提升内存使用效率，降低由于高负载导致的频繁 GC .
PooledByteBuf 抽象类的子类 ：
@Override
public ByteBuf readBytes(ByteBuf dst, int dstIndex, int length) {
checkReadableBytes(length);
//抽象方法交由子类实现
getBytes(readerIndex, dst, dstIndex, length);
readerIndex += length;
return this;
}
看一下写操作
@Override
public ByteBuf writeBytes(byte[] src, int srcIndex, int length) {
ensureWritable(length);
setBytes(writerIndex, src, srcIndex, length);
writerIndex += length;
return this;
}
@Override
public ByteBuf ensureWritable(int minWritableBytes) {
if (minWritableBytes < 0) {
throw new IllegalArgumentException(String.format(
"minWritableBytes: %d (expected: >= 0)", minWritableBytes));
}
if (minWritableBytes <= writableBytes()) {
return this;
}
if (minWritableBytes > maxCapacity - writerIndex) {
throw new IndexOutOfBoundsException(String.format(
"writerIndex(%d) + minWritableBytes(%d) exceeds maxCapacity(%d): %s",
writerIndex, minWritableBytes, maxCapacity, this));
}
// Normalize the current capacity to the power of 2.
int newCapacity = calculateNewCapacity(writerIndex + minWritableBytes);
// Adjust to the new capacity.
capacity(newCapacity);
return this;
}
/**
* 计算新容量并没有一下子就增加一倍这样的简单思路，而是一点点地增加。
*
*/
private int calculateNewCapacity(int minNewCapacity) {
final int maxCapacity = this.maxCapacity;
final int threshold = 1048576 * 4; // 4 MiB page
if (minNewCapacity == threshold) {
return threshold;
}
// If over threshold, do not double but just increase by threshold.
if (minNewCapacity > threshold) {
int newCapacity = minNewCapacity / threshold * threshold;
if (newCapacity > maxCapacity - threshold) {
newCapacity = maxCapacity;
} else {
newCapacity += threshold;
}
return newCapacity;
}
// Not over threshold. Double up to 4 MiB, starting from 64.
int newCapacity = 64;
while (newCapacity < minNewCapacity) {
newCapacity <<= 1;
}
return Math.min(newCapacity, maxCapacity);
}
丢弃已读区域，复用缓冲区
@Override
public ByteBuf discardReadBytes() {
ensureAccessible();
if (readerIndex == 0) {
return this;
}
if (readerIndex != writerIndex) {
//子类实现，字节数组进行复制，读写区域进行前移
setBytes(0, this, readerIndex, writerIndex - readerIndex);
writerIndex -= readerIndex;
adjustMarkers(readerIndex);
readerIndex = 0;
} else {
adjustMarkers(readerIndex);
writerIndex = readerIndex = 0;
}
return this;
}
protected final void adjustMarkers(int decrement) {
int markedReaderIndex = this.markedReaderIndex;
if (markedReaderIndex <= decrement) {
this.markedReaderIndex = 0;
int markedWriterIndex = this.markedWriterIndex;
if (markedWriterIndex <= decrement) {
this.markedWriterIndex = 0;
} else {
this.markedWriterIndex = markedWriterIndex - decrement;
}
} else {
this.markedReaderIndex = markedReaderIndex - decrement;
markedWriterIndex -= decrement;
}
}
从名字看出该类主要对引用进行计数，类似于JVM 内存回收的对象引用计数器，用于跟踪对象的分配和销毁，做自动内存回收。
public abstract class AbstractReferenceCountedByteBuf extends AbstractByteBuf {
//利用原子类进行CAS 操作，保证了线程安全
private static final AtomicIntegerFieldUpdater<AbstractReferenceCountedByteBuf> refCntUpdater =
AtomicIntegerFieldUpdater.newUpdater(AbstractReferenceCountedByteBuf.class, "refCnt");
private static final long REFCNT_FIELD_OFFSET;
static {
long refCntFieldOffset = -1;
try {
if (PlatformDependent.hasUnsafe()) {
refCntFieldOffset = PlatformDependent.objectFieldOffset(
AbstractReferenceCountedByteBuf.class.getDeclaredField("refCnt"));
}
} catch (Throwable t) {
// Ignored
}
REFCNT_FIELD_OFFSET = refCntFieldOffset;
}
@SuppressWarnings("FieldMayBeFinal")
private volatile int refCnt = 1;
@Override
public final boolean release() {
for (;;) {
int refCnt = this.refCnt;
if (refCnt == 0) {
throw new IllegalReferenceCountException(0, -1);
}
if (refCntUpdater.compareAndSet(this, refCnt, refCnt - 1)) {
if (refCnt == 1) {
deallocate();
return true;
}
return false;
}
}
}
@Override
public ByteBuf retain() {
for (;;) {
int refCnt = this.refCnt;
if (refCnt == 0) {
throw new IllegalReferenceCountException(0, 1);
}
if (refCnt == Integer.MAX_VALUE) {
throw new IllegalReferenceCountException(Integer.MAX_VALUE, 1);
}
//CAS 操作
if (refCntUpdater.compareAndSet(this, refCnt, refCnt + 1)) {
break;
}
}
return this;
}
....
这个类有三个重要的字段，一个原子类用于多线程操作，保证线程安全。REFCNT_FIELD_OFFSET 是一个内存偏移量，用于标识 refCnt字段在AbstractReferenceCountedByteBuf这个类
的内存地址，最后一个refCnt 是用 volatile 修饰的变量，保存对象应用次数。
public class UnpooledHeapByteBuf extends AbstractReferenceCountedByteBuf {
//内存分配
private final ByteBufAllocator alloc;
//字节缓存区
private byte[] array;
//作用和 JDK ByteBuffer 的转化
private ByteBuffer tmpNioBuf;
...
private int getBytes(int index, GatheringByteChannel out, int length, boolean internal) throws IOException {
ensureAccessible();
ByteBuffer tmpBuf;
//使用自身字段 tmpNioBuf 进行操作返回，所以 UnpooledHeapByteBuf 是在 JDK ByteBuff 的基础上进行扩展的。
if (internal) {
tmpBuf = internalNioBuffer();
} else {
tmpBuf = ByteBuffer.wrap(array);
}
return out.write((ByteBuffer) tmpBuf.clear().position(index).limit(index + length));
}
@Override
public int readBytes(GatheringByteChannel out, int length) throws IOException {
checkReadableBytes(length);
int readBytes = getBytes(readerIndex, out, length, true);
readerIndex += readBytes;
return readBytes;
}
文章主要介绍netty buffer 相关的知识，主要是父类方法和 unpooled 相关的实现。
标签：基础上 oca == rect 引用计数 对象引用 iobuffer ali 次数
原文地址：https://www.cnblogs.com/Benjious/p/11634877.html
