自制python脚本监控EMC VNXe 3200存储硬盘

标签：day   war   init   out   python   ddr   ever   cti   tput   

测试运行结果
[root@localhost libexec]# ./vnxe.py
VNXe 3200 harddisk ok

先在commands.cfg中添加命令。
[root@localhost libexec]# vi /usr/local/nagios/etc/objects/commands.cfg
define command {
command_name vnxe
command_line $USER1$/vnxe.py
}

在nagios.cfg中添加以下内容
[root@localhost libexec]# vi /usr/local/nagios/etc/nagios.cfg
cfg_file=/usr/local/nagios/etc/objects/VNXe.cfg

定义主机和服务：在/usr/local/nagios/etc/objects中新建VNXe.cfg
[root@localhost libexec]# vi /usr/local/nagios/etc/objects/VNXe.cfg
define host{
use EMC VNXe 3200
host_name EMC VNXe 3200
alias EMC VNXe 3200
address 10.10.1.11
}

define service{
use generic-service
host_name EMC VNXe 3200
service_description EMC VNXe 3200
check_command vnxe
notifications_enabled 1
}

然后必须在templates.cfg中添加以下内容
[root@localhost libexec]# vi /usr/local/nagios/etc/objects/templates.cfg
define host{
name EMC VNXe 3200 ; The name of this host template
use generic-host ; This template inherits other values from the generic-host template
check_period 24x7 ; By default, EMC VNXe 3200 hosts are checked round the clock
check_interval 5 ; Actively check the host every 10 minutes
retry_interval 1 ; Schedule host check retries at 10 minute intervals
max_check_attempts 10 ; Check each EMC VNXe 3200 host 10 times (max)
check_command check-host-alive ; Default command to check EMC VNXe 3200 hosts
notification_period workhours ; EMC VNXe 3200 admins hate to be woken up, so we only notify during the day
; Note that the notification_period variable is being overridden from
; the value that is inherited from the generic-host template!
notification_interval 120 ; Resend notifications every 2 hours
notification_options d,u,r ; Only send notifications for specific host states
contact_groups admins ; Notifications get sent to the admins by default
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
}

放入Nagios测试后，结果出错，（没有任何报错信息）始终找不到问题。原因是Nagios中的 command_line $USER1$/vnxe.py是以nagios账号来运行脚本vnxe.py，抓取不到正确的python脚本结果（前面我们是用root来运行，所以才能得到正确的结果）。以下解决问题。
[root@localhost libexec]# visudo
nagios ALL=(ALL) NOPASSWD:/usr/local/nagios/libexec/vnxe.py
#Defaults requiretty

在commands.cfg中修改命令。
[root@localhost libexec]# vi /usr/local/nagios/etc/objects/commands.cfg
define command {
command_name vnxe
command_line sudo $USER1$/vnxe.py

重启 Nagios生效
[root@localhost libexec]# systemctl restart nagios.service

自制python脚本监控EMC VNXe 3200存储硬盘

标签：day   war   init   out   python   ddr   ever   cti   tput   

原文地址：https://blog.51cto.com/2290153/2452211