标签：android io ar for sp on art log cti
HELLO! BOOT0 is starting!
boot0 version : 2.0.0
read dram para.
dram driver version: 1.15
dram size =1024MB
0x7b7afe7f
super_standby_flag = 0
Succeed in opening nand flash.
block from 2 to 6
deal block 2
Succeed in reading Boot1 file head.
The size of Boot1 is 0x00068000.
The file stored in 0x00000000 of block 2 is perfect.
Check is correct.
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[ 0.149] boot1 version : 2.0.0
[ 0.158] script installed early ok
[ 0.158] pmu type = 3
[ 0.160] bat vol = 0 mv
[ 0.176] axi:ahb:apb=4:2:2
[ 0.176] set dcdc2=1400mv, clock=912M successed
[ 0.178] key
[ 0.191] no key found
[ 0.191] flash init start
[ 0.191] NB1 : enter NFB_Init
[ 0.194] NB1 : enter phy init
[ 0.197] [NAND] nand driver(b) version: 0x0x00000002, 0x0x00000012, data: 0x20130325
[ 0.207] get the good blk ratio from hwscan : 944
[ 0.210] NB1 : nand phy init ok
[ 2.023] _RepairLogBlkTbl start
[ 2.025] [DUBG], check free block 0x000003fd ok!
[ 2.514] Log Block Index 0x00000000, LogicBlockNum: 0x00000091, LogBlockType: 0x00000001
[ 2.517] log0: 0x0000003e, Log1: 0x000003fd, WriteIndex: 0x00000000
[ 2.524] datablock: 0x000003a7, lastusedpage: 0x00000062
[ 2.531] [DUBG], check free block 0x000003fc ok!
[ 2.923] Log Block Index 0x00000001, LogicBlockNum: 0x00000170, LogBlockType: 0x00000001
[ 2.926] log0: 0x000003a8, Log1: 0x000003fc, WriteIndex: 0x00000000
[ 2.932] datablock: 0x000000cc, lastusedpage: 0x000000ee
[ 2.940] [DUBG], check free block 0x000003f9 ok!
[ 3.465] Log Block Index 0x00000002, LogicBlockNum: 0x00000171, LogBlockType: 0x00000001
[ 3.468] log0: 0x000003a5, Log1: 0x000003f9, WriteIndex: 0x00000000
[ 3.475] datablock: 0x000003b6, lastusedpage: 0x00000032
[ 3.482] [DUBG], check free block 0x000003f8 ok!
[ 3.934] Log Block Index 0x00000003, LogicBlockNum: 0x000000f0, LogBlockType: 0x00000001
[ 3.937] log0: 0x000003ae, Log1: 0x000003f8, WriteIndex: 0x00000000
[ 3.943] datablock: 0x000003b7, lastusedpage: 0x0000009a
[ 3.949] _RepairLogBlkTbl end
[ 4.005] NB1 : init ok
[ 4.006] flash init finish
[ 4.031] fs init ok
[ 4.033] fattype FAT16
[ 4.033] fs mount ok
[ 4.038] nand good_block_ratio=944
[ 4.038] storage_type=0
[ 4.083] 13
[ 4.235] WRN:L232(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.output_type fail
[ 4.240] WRN:L268(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.output_mode fail
[ 4.250] WRN:L288(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.auto_hpd fail
[ 4.260] lcd0_para.lcd_used=0
[ 4.263] 0
[ 4.466] 1
[ 4.667] 2
[ 4.868] 3
[ 5.069] 4
[ 5.270] 5
[ 5.471] tv detect, ret = 0
[ 5.471] no device plug
[ 5.471] key value = 0
[ 5.474] recovery key high 6, low 4
[ 5.577] show pic finish
[ 5.577] load kernel start
[ 5.607] load kernel successed
[ 5.607] start address = 0x4a000000
[ 6.373] jump to
U-Boot 2011.09-rc1-00000-g156f5d7-dirty (Aug 16 2013 - 17:10:23) Allwinner Technology
CPU: SUNXI Family
Board: SUN7I-EVB
DRAM: 1 GiB
NAND: [NAND] set nand_good_block_ratio 944
3776 MiB
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:11-
-name- -start- -size-
bootloader : 8000 8000
env : 10000 8000
boot : 18000 8000
system : 20000 100000
data : 120000 200000
misc : 320000 8000
recovery : 328000 10000
cache : 338000 a0000
private : 3d8000 8000
databk : 3e0000 80000
UDISK : 460000 300000
-----------------------------------
bootcmd set setargs_nand
Hit any key to stop autoboot: 0
Starting kernel ...
[ 0.700067] aw_pm_init: not support super standby.
[ 0.736718] sw_ahci sw_ahci.0: SATA power enable do not exist!!
[ 0.997850] ctp_fetch_sysconfig_para: ctp_unused.
[ 1.038600] [+++BLUESLEEP+++]bluesleep_probe: bluesleep_probe line 639
[ 1.038607]
[ 1.047626] [gpio-err] __pio_to_irq: invalid pio to irq
[ 2.972625] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 2.980918] ata1: irq_stat 0x00000040, connection status changed
[ 2.987656] ata1: SError: { CommWake DevExch }
[ 3.686192] init: to sleep 1 seconds.
[ 4.690391] init: has waken up.
[ 4.694017] init: [william] hdmistatus = 0!
[ 4.698712] init: [william] tvstatus = 0!
[ 4.703825] init: width = 1280
[ 4.707265] init: height = 720
[ 4.710695] init: s.st_size = 3686400
[ 5.222948] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 5.231232] ata1: irq_stat 0x00000040, connection status changed
[ 5.237990] ata1: SError: { CommWake DevExch }
[ 5.828229] init: do_umount: /data
[ 6.135101] init: do_umount: /cache
[ 6.235068] init: dont need format /dev/block/UDISK
[ 6.242031] init: dont need format /dev/block/private
[ 6.268626] init: do_umount: /databk
[ 6.438198] init: cannot find ‘/system/etc/install-recovery.sh‘, disabling ‘flash_recovery‘
[ 7.367001] android_usb: already disabled
[ 7.371927] init: using deprecated syntax for specifying property ‘sys.usb.config‘, use ${name} instead
[ 7.384069] init: using deprecated syntax for specifying property ‘sys.usb.config‘, use ${name} instead
[ 7.473275] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 7.493643] ata1: irq_stat 0x00000040, connection status changed
[ 7.502565] ata1: SError: { CommWake DevExch }
[ 9.772993] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 9.781274] ata1: irq_stat 0x00000040, connection status changed
[ 9.788040] ata1: SError: { CommWake DevExch }
[ 12.023289] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 12.031608] ata1: irq_stat 0x00000040, connection status changed
[ 12.038421] ata1: SError: { CommWake DevExch }
[ 14.272529] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 14.280813] ata1: irq_stat 0x00000040, connection status changed
[ 14.287660] ata1: SError: { CommWake DevExch }
[ 16.532966] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 16.541285] ata1: irq_stat 0x00000040, connection status changed
[ 16.548046] ata1: SError: { CommWake DevExch }
[ 18.782663] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 18.790936] ata1: irq_stat 0x00000040, connection status changed
[ 18.801067] ata1: SError: { CommWake DevExch }
[ 21.033287] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
标签：android io ar for sp on art log cti
原文地址：http://my.oschina.net/tiancheng13/blog/338718
