Linux下安装SVN服务端

标签：grant   inux   sse   lin   ogr   create   mon   权限控制   val   

一、yum 安装

yum install subversion

二、配置

1、创建仓库

我们在/home下建立一个名为svn的仓库（repository），以后所有代码都放在这个下面，创建成功后在svn下面多了几个文件夹。

[root@localhost /]# cd /home
[root@localhost home]# mkdir svn
[root@localhost home]# svnadmin create /home/svn
[root@localhost home]# ls svn
conf  db  format  hooks  locks  README.txt

conf文件夹，是存放配置文件的

[root@localhost home]# cd svn/conf
[root@localhost conf]# ls
authz  passwd  svnserve.conf

authz 是权限控制文件
passwd 是帐号密码文件
svnserve.conf 是SVN服务配置文件

2、配置passwd 文件

[root@localhost conf]# vim passwd 

### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line.
[users]
# harry = harryssecret
# sally = sallyssecret

user1=123456
user2=123456

3、配置authz

[root@localhost conf]# vim authz 

### This file is an example authorization file for svnserve.
### Its format is identical to that of mod_authz_svn authorization
### files.
### As shown below each section defines authorizations for the path and
### (optional) repository specified by the section name.
### The authorizations follow. An authorization line can refer to:
###  - a single user,
###  - a group of users defined in a special [groups] section,
###  - an alias defined in a special [aliases] section,
###  - all authenticated users, using the '$authenticated' token,
###  - only anonymous users, using the '$anonymous' token,
###  - anyone, using the '*' wildcard.
###
### A match can be inverted by prefixing the rule with '~'. Rules can
### grant read ('r') access, read-write ('rw') access, or no access
### ('').

[aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average

[groups]
# harry_and_sally = harry,sally
# harry_sally_and_joe = harry,sally,&joe

# [/foo/bar]
# harry = rw
# &joe = r
# * =

# [repository:/baz/fuz]
# @harry_and_sally = rw
# * = r

[/]
user1=rw
user2=r
*=
~  

4、配置svnserve.conf

[root@localhost conf]# vim svnserve.conf 

### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository.  (If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.)

### Visit http://subversion.apache.org/ for more information.

[general]
### The anon-access and auth-access options control access to the
### repository for unauthenticated (a.k.a. anonymous) users and
### authenticated users, respectively.
### Valid values are "write", "read", and "none".
### Setting the value to "none" prohibits both reading and writing;
### "read" allows read-only access, and "write" allows complete 
### read/write access to the repository.
### The sample settings below are the defaults and specify that anonymous
### users have read-only access to the repository, while authenticated
### users have read and write access to the repository.
anon-access = read
auth-access = write
### The password-db option controls the location of the password
### database file.  Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control.  Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file.  If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa.  The default realm
### is repository's uuid.
# realm = My First Repository
realm = /home/svn
### The force-username-case option causes svnserve to case-normalize
### usernames before comparing them against the authorization rules in the
### authz-db file configured above.  Valid values are "upper" (to upper-
### case the usernames), "lower" (to lowercase the usernames), and
### "none" (to compare usernames as-is without case conversion, which
### is the default behavior).
# force-username-case = none

[sasl]
### This option specifies whether you want to use the Cyrus SASL
### library for authentication. Default is false.
### This section will be ignored if svnserve is not built with Cyrus
                                

最后一行的realm记得改成你的svn目录
打开注释时切记前面不要留有空格

三、启动与停止

[root@localhost conf]# svnserve -d -r /home/svn（启动）
[root@localhost conf]#kill all svnserve（停止）

本文作者：魂皓轩 欢迎关注公众号

本人保留所有权益，转载请注明出处。
欢迎有故事、有想法的朋友和我分享，可发送至 e-mail: lwqforit@163.com

Linux下安装SVN服务端

标签：grant   inux   sse   lin   ogr   create   mon   权限控制   val   

原文地址：https://www.cnblogs.com/lwqforit/p/11985880.html