[转帖]Java性能检测工具-记录一次通过jstack排查Linux服务器CPU占用率很高的实践

时间：2020-01-05 15:39:37 阅读：163 评论：0 收藏：0 [点我收藏+]

标签：quartz down cpu故障 java程序浏览器 har read nano run

Java性能检测工具-记录一次通过jstack排查Linux服务器CPU占用率很高的实践

https://www.jianshu.com/p/d4e31301ba2e

一、问题描述

Linux服务器的配置是4核16G，将war包部署到tomcat后，启动tomcat，发现内存占用率不高，但是CPU一直高达100%；浏览器输入相关url也无法访问该项目，且tomcat的进程一直存在，程序的配置什么的都没问题啊，一头雾水......通过top命令查看服务器的性能状况如下：

[root@aws-java-MAM ec2-user]# top
top - 18:49:21 up 45 min,  2 users,  load average: 0.97, 0.50, 0.19
Tasks: 129 total,   1 running, 128 sleeping,   0 stopped,   0 zombie
Cpu0  : 95.1%us,  0.0%sy,  0.0%ni,  4.9%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
Cpu1  :  5.9%us,  0.0%sy,  0.0%ni, 94.1%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
Cpu2  :  1.6%us,  0.5%sy,  0.0%ni, 97.8%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
Cpu3  :  1.1%us,  0.0%sy,  0.0%ni, 98.9%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:  16330912k total,  2374776k used, 13956136k free,    20172k buffers
Swap:        0k total,        0k used,        0k free,   370244k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND                                                                                                                                                                                                         
 2141 root      20   0 7684m 1.7g  22m S 103.0 11.0   3:35.95 java                                                                                                                                                                                                            
 1423 root      20   0  449m  23m 2884 S  0.0  0.1   0:01.05 salt-minion                                                                                                                                                                                                      
 1959 root      20   0 98280 3860 2920 S  0.0  0.0   0:00.00 sshd                                                                                                                                                                                                             
 2278 root      20   0 98280 3836 2900 S  0.0  0.0   0:00.00 sshd                                                                                                                                                                                                             
 1387 postfix   20   0 81536 3436 2544 S  0.0  0.0   0:00.00 qmgr                                                                                                                                                                                                             
 1379 root      20   0 81284 3424 2520 S  0.0  0.0   0:00.01 master                                                                                                                                                                                                           
 1386 postfix   20   0 81364 3380 2508 S  0.0  0.0   0:00.00 pickup                                                                                                                                                                                                           
 1303 ntp       20   0 30720 2124 1508 S  0.0  0.0   0:00.00 ntpd                                                                                                                                                                                                             
 1986 root      20   0  105m 2000 1544 S  0.0  0.0   0:00.03 bash                                                                                                                                                                                                             
 1413 zabbix    20   0 42448 1972 1300 S  0.0  0.0   0:00.13 zabbix_agentd

可以看出PID为2141的java进程耗费内存11%，不算高，但是CPU达到103%，应该是哪里出现了死循环或者线程阻塞住了，导致CPU占用居高不下（各种配置个人觉得应该是没问题的），怎么定位到具体线程或者程序位置呢？想到了jstack工具。

二、jstack简介

jstack是java虚拟机自带的一种堆栈跟踪工具。用于打印出给定的java进程ID或core file或远程调试服务的Java堆栈信息，使用jstack命令工具可以得到线程堆栈信息，根据这些线程堆栈信息，我们可以去检查Java程序出现的问题，如检测死锁，并输出死锁的信息的排查。

三、排查方式

1、首先通过如下命令显示线程列表

ps -mp pid -o THREAD,tid,time

[root@aws-java-MAM ec2-user]# ps -mp 2141 -o THREAD,tid,time |sort -rn
USER     %CPU PRI SCNT WCHAN  USER SYSTEM   TID     TIME
root     94.3   -    - -         -      -     - 00:04:04
root     85.9  19    - -         -      -  2185 00:03:21
root      3.7  19    - futex_    -      -  2153 00:00:09
root      3.6  19    - futex_    -      -  2152 00:00:09
root      2.8  19    - futex_    -      -  2162 00:00:07
root      1.3  19    - futex_    -      -  2154 00:00:03
root      0.9  19    - futex_    -      -  2176 00:00:02
root      0.7  19    - futex_    -      -  2147 00:00:02
root      0.7  19    - futex_    -      -  2146 00:00:02
root      0.7  19    - futex_    -      -  2145 00:00:02
root      0.7  19    - futex_    -      -  2144 00:00:02
root      0.2  19    - futex_    -      -  2148 00:00:00
root      0.2  19    - futex_    -      -  2143 00:00:00
root      0.1  19    - inet_s    -      -  2209 00:00:00
root      0.0  19    - poll_s    -      -  2181 00:00:00
root      0.0  19    - poll_s    -      -  2179 00:00:00
root      0.0  19    - futex_    -      -  2188 00:00:00
root      0.0  19    - futex_    -      -  2183 00:00:00
root      0.0  19    - futex_    -      -  2182 00:00:00
root      0.0  19    - futex_    -      -  2180 00:00:00
root      0.0  19    - futex_    -      -  2178 00:00:00
root      0.0  19    - futex_    -      -  2175 00:00:00

从这里可以看出最耗CPU的线程ID是2185，占用CPU85.9%，TIME对应的是时间，持续了3分21秒钟了，命令中的sort -rn是倒序排序的意思。

2、将需要的线程ID转换为16进制格式

printf "%x\n" tid

[root@aws-java-MAM ec2-user]# printf "%x\n" 2185
889

3、打印线程的堆栈信息

jstack pid |grep tid -A 100

[root@aws-java-MAM ec2-user]# jstack 2141 |grep 889 -A 100
"Common.timer" #39 daemon prio=5 os_prio=0 tid=0x00007ffbc4398800 nid=0x889 runnable [0x00007ffc49b19000]
   java.lang.Thread.State: RUNNABLE
    at com.skymusic.service.cache.Cache$1.run(Cache.java:59)
    at java.util.TimerThread.mainLoop(Timer.java:555)
    at java.util.TimerThread.run(Timer.java:505)

"Timer-1" #37 daemon prio=5 os_prio=0 tid=0x00007ffbc4373800 nid=0x887 in Object.wait() [0x00007ffc49c1a000]
   java.lang.Thread.State: TIMED_WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    at java.util.TimerThread.mainLoop(Timer.java:552)
    - locked <0x00000006c8201a40> (a java.util.TaskQueue)
    at java.util.TimerThread.run(Timer.java:505)

"pool-4-thread-2" #36 prio=5 os_prio=0 tid=0x00007ffbc41f9800 nid=0x886 waiting on condition [0x00007ffc49f1b000]
   java.lang.Thread.State: TIMED_WAITING (parking)
    at sun.misc.Unsafe.park(Native Method)
    - parking to wait for  <0x00000006cb893460> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
    at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:215)
    at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(AbstractQueuedSynchronizer.java:2078)
    at java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue.take(ScheduledThreadPoolExecutor.java:1093)
    at java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue.take(ScheduledThreadPoolExecutor.java:809)
    at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1067)
    at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1127)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
    at java.lang.Thread.run(Thread.java:745)

"AMQP Connection 172.31.44.144:5672" #35 prio=5 os_prio=0 tid=0x00007ffbc41f8000 nid=0x885 runnable [0x00007ffc4a01c000]
   java.lang.Thread.State: RUNNABLE
    at java.net.SocketInputStream.socketRead0(Native Method)
    at java.net.SocketInputStream.socketRead(SocketInputStream.java:116)
    at java.net.SocketInputStream.read(SocketInputStream.java:170)
    at java.net.SocketInputStream.read(SocketInputStream.java:141)
    at java.io.BufferedInputStream.fill(BufferedInputStream.java:246)
    at java.io.BufferedInputStream.read(BufferedInputStream.java:265)
    - locked <0x00000006cb893a28> (a java.io.BufferedInputStream)
    at java.io.DataInputStream.readUnsignedByte(DataInputStream.java:288)
    at com.rabbitmq.client.impl.Frame.readFrom(Frame.java:91)
    at com.rabbitmq.client.impl.SocketFrameHandler.readFrame(SocketFrameHandler.java:164)
    - locked <0x00000006cb893a08> (a java.io.DataInputStream)
    at com.rabbitmq.client.impl.AMQConnection$MainLoop.run(AMQConnection.java:596)
    at java.lang.Thread.run(Thread.java:745)

"pool-2-thread-2" #34 prio=5 os_prio=0 tid=0x00007ffbc41f6800 nid=0x884 waiting on condition [0x00007ffc4a11d000]
   java.lang.Thread.State: TIMED_WAITING (parking)
    at sun.misc.Unsafe.park(Native Method)
    - parking to wait for  <0x00000006cbca2378> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
    at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:215)
    at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(AbstractQueuedSynchronizer.java:2078)
    at java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue.take(ScheduledThreadPoolExecutor.java:1093)
    at java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue.take(ScheduledThreadPoolExecutor.java:809)
    at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1067)
    at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1127)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
    at java.lang.Thread.run(Thread.java:745)

"AMQP Connection 172.31.41.147:5672" #33 prio=5 os_prio=0 tid=0x00007ffbc41ef000 nid=0x883 runnable [0x00007ffc4a21e000]
   java.lang.Thread.State: RUNNABLE
    at java.net.SocketInputStream.socketRead0(Native Method)
    at java.net.SocketInputStream.socketRead(SocketInputStream.java:116)
    at java.net.SocketInputStream.read(SocketInputStream.java:170)
    at java.net.SocketInputStream.read(SocketInputStream.java:141)
    at java.io.BufferedInputStream.fill(BufferedInputStream.java:246)
    at java.io.BufferedInputStream.read(BufferedInputStream.java:265)
    - locked <0x00000006cbcb8b60> (a java.io.BufferedInputStream)
    at java.io.DataInputStream.readUnsignedByte(DataInputStream.java:288)
    at com.rabbitmq.client.impl.Frame.readFrom(Frame.java:91)
    at com.rabbitmq.client.impl.SocketFrameHandler.readFrame(SocketFrameHandler.java:164)
    - locked <0x00000006cbcb8b40> (a java.io.DataInputStream)
    at com.rabbitmq.client.impl.AMQConnection$MainLoop.run(AMQConnection.java:596)
    at java.lang.Thread.run(Thread.java:745)

"Timer-0" #32 daemon prio=5 os_prio=0 tid=0x00007ffbf8f94800 nid=0x882 in Object.wait() [0x00007ffc4aad1000]
   java.lang.Thread.State: TIMED_WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x00000006cbcc2d48> (a java.util.TaskQueue)
    at java.util.TimerThread.mainLoop(Timer.java:552)
    - locked <0x00000006cbcc2d48> (a java.util.TaskQueue)
    at java.util.TimerThread.run(Timer.java:505)

"Thread-7" #30 daemon prio=5 os_prio=0 tid=0x00007ffbf8f90800 nid=0x880 waiting on condition [0x00007ffc4b0f3000]
   java.lang.Thread.State: WAITING (parking)
    at sun.misc.Unsafe.park(Native Method)
    - parking to wait for  <0x00000006c8160e18> (a java.util.concurrent.CountDownLatch$Sync)
    at java.util.concurrent.locks.LockSupport.park(LockSupport.java:175)
    at java.util.concurrent.locks.AbstractQueuedSynchronizer.parkAndCheckInterrupt(AbstractQueuedSynchronizer.java:836)
    at java.util.concurrent.locks.AbstractQueuedSynchronizer.doAcquireSharedInterruptibly(AbstractQueuedSynchronizer.java:997)
    at java.util.concurrent.locks.AbstractQueuedSynchronizer.acquireSharedInterruptibly(AbstractQueuedSynchronizer.java:1304)
    at java.util.concurrent.CountDownLatch.await(CountDownLatch.java:231)
    at com.dj.boot.Boot.init(Boot.java:108)
    at com.dj.boot.Boot.dev(Boot.java:35)
    at com.dj.filter.MD5Filter$1.run(MD5Filter.java:65)
    at java.lang.Thread.run(Thread.java:745)

"startQuertz_QuartzSchedulerThread" #29 prio=5 os_prio=0 tid=0x00007ffbf8f77800 nid=0x87f in Object.wait() [0x00007ffc4b1f4000]
   java.lang.Thread.State: TIMED_WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:410)
    - locked <0x00000006c7dbf6b0> (a java.lang.Object)

"startQuertz_Worker-10" #28 prio=5 os_prio=0 tid=0x00007ffbf8f6c000 nid=0x87e in Object.wait() [0x00007ffc4b2f5000]
   java.lang.Thread.State: TIMED_WAITING (on object monitor)
[root@aws-java-MAM ec2-user]#

-A后面的参数是行数，显示多少行堆栈信息，100就是显示100行。其中以下部分的内容引起了我的关注：

"Thread-7" #30 daemon prio=5 os_prio=0 tid=0x00007ffbf8f90800 nid=0x880 waiting on condition [0x00007ffc4b0f3000]
   java.lang.Thread.State: WAITING (parking)
    at sun.misc.Unsafe.park(Native Method)
    - parking to wait for  <0x00000006c8160e18> (a java.util.concurrent.CountDownLatch$Sync)
    at java.util.concurrent.locks.LockSupport.park(LockSupport.java:175)
    at java.util.concurrent.locks.AbstractQueuedSynchronizer.parkAndCheckInterrupt(AbstractQueuedSynchronizer.java:836)
    at java.util.concurrent.locks.AbstractQueuedSynchronizer.doAcquireSharedInterruptibly(AbstractQueuedSynchronizer.java:997)
    at java.util.concurrent.locks.AbstractQueuedSynchronizer.acquireSharedInterruptibly(AbstractQueuedSynchronizer.java:1304)
    at java.util.concurrent.CountDownLatch.await(CountDownLatch.java:231)
    at com.dj.boot.Boot.init(Boot.java:108)
    at com.dj.boot.Boot.dev(Boot.java:35)
    at com.dj.filter.MD5Filter$1.run(MD5Filter.java:65)
    at java.lang.Thread.run(Thread.java:745)

这里有个MD5Filter类的run方法，起了一个线程去初始化一个Boot配置（其他同事新增的业务，不了解），然后一直在这里WATTING了，于是找了相关同事看了一下，发现新增的业务逻辑有问题，同事改了之后CPU就下来了。

4、再总结下排查CPU故障的方法和技巧

1）top命令

查看实时的CPU使用情况，也可以查看最近一段时间的CPU使用情况。

2）PS命令

进程状态监控命令；可以查看进程以及进程中线程的当前CPU使用情况，属于当前状态的采样数据。

3）jstack

查看某个进程的当前线程栈运行情况。根据这个命令的输出可以定位某个进程的所有线程的当前运行状态、运行代码，以及是否死锁等。

4）pstack

查看某个进程的当前线程栈运行情况。

[转帖]Java性能检测工具-记录一次通过jstack排查Linux服务器CPU占用率很高的实践

标签：quartz down cpu故障 java程序浏览器 har read nano run

原文地址：https://www.cnblogs.com/jinanxiaolaohu/p/12092325.html

踩

(0)

评论一句话评论（0）

分享档案

更多>

2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)

周排行