Linux Kernel中函数命名

标签：inter   调用   rup   tchar   struct   ica   模型   忽略   stc   

在Linux Kernel中某些特定含义的函数命令有自己的规律，比如这里将简单的介绍一下函数名前双下划线__和devm_xxx函数的意思。

函数名称前的双下划线__
标记需要加锁：
在内核中，有很多函数，有的是需要调用者自己加锁保护的，有些是不需要加锁保护的。对于这些场景，linux kernel采取了统一的策略：基本函数名字是一样的，只不过需要调用者自己加锁保护的那个函数需要增加__的前缀，例如内核有有下面两个函数：setup_irq()和__setup_irq()。
两个函数在kernel/irq/manage.c中定义：

/**
 *  setup_irq - setup an interrupt
 *  @irq: Interrupt line to setup
 *  @act: irqaction for the interrupt
 *
 * Used to statically setup interrupts in the early boot process.
 */
int setup_irq(unsigned int irq, struct irqaction *act)
{
    int retval;
    struct irq_desc *desc = irq_to_desc(irq);

    if (WARN_ON(irq_settings_is_per_cpu_devid(desc)))
        return -EINVAL;
    chip_bus_lock(desc);
    retval = __setup_irq(irq, desc, act);
    chip_bus_sync_unlock(desc);

    return retval;
}
EXPORT_SYMBOL_GPL(setup_irq);

标记更接近底层的调用
一般双下划线也用于标记更接近底层的调用，如kernel/irq/manage.c中的__disable_irq_nosync(): ```

/** * disable_irq_nosync - disable an irq without waiting

• @irq: Interrupt to disable
• Disable the selected interrupt line. Disables and Enables are
• nested.
• Unlike disable_irq(), this function does not ensure existing
• instances of the IRQ handler have completed before returning.
• This function may be called from IRQ context.
  */
  void disable_irq_nosync(unsignedint irq)
  {
  __disable_irq_nosync(irq);
  }
  EXPORT_SYMBOL(disable_irq_nosync);

/**

• disable_irq - disable an irq and wait for completion
• @irq: Interrupt to disable
• Disable the selected interrupt line. Enables and Disables are
• nested.
• This function waits for any pending IRQ handlers for this interrupt
• to complete before returning. If you use this function while
• holding a resource the IRQ handler may need you will deadlock.
• This function may be called - with care - from IRQ context.
  */
  void disable_irq(unsignedint irq)
  {
  if(!__disable_irq_nosync(irq)) synchronize_irq(irq);
  }
  EXPORT_SYMBOL(disable_irq);

devm_xxx 函数
下面列举一些常用的资源申请接口，它们由各个framework（如clock、regulator、gpio等等）基于device resource management实现。使用时，直接忽略devm_的前缀，后面剩下的部分，driver工程师都很熟悉。只需记住一点，driver可以只申请，不释放，设备模型会帮忙释放。不过如果为了严谨，在driver remove时，可以主动释放（也有相应的接口，这里没有列出）。

externvoiddevm_kzalloc(struct device dev,size_t size, gfp_t gfp);

void __iomem devm_ioremap_resource(struct device dev,struct resource *res);

void __iomem devm_ioremap(struct device dev, resource_size_t offset,unsignedlong size);

struct clk devm_clk_get(struct device dev,constchar*id);

int devm_gpio_request(struct device dev,unsigned gpio,constcharlabel);

static inline struct pinctrl * devm_pinctrl_get_select(struct device dev,constcharname)

static inline struct pwm_device devm_pwm_get(struct device dev,constchar*consumer);

struct regulator devm_regulator_get(struct device dev,constcharid);
static inline int devm_request_irq(struct device dev,unsignedint irq, irq_handler_t handler,
unsignedlong irqflags,constchardevname,voiddev_id);

struct reset_control devm_reset_control_get(struct device dev,constchar*id);
```

Linux Kernel中函数命名

标签：inter   调用   rup   tchar   struct   ica   模型   忽略   stc   

原文地址：https://www.cnblogs.com/linengier/p/12195683.html