HCNA实验指南-配置STelnet登陆系统

标签：管理   stat   wait   ++   use   使用   RoCE   timeout   val   

<Huawei>system-view 
[Huawei]sysname AR1
[AR1]rsa local-key-pair create 
The key name will be: Host
% RSA keys defined for Host already exist.
Confirm to replace them? (y/n)[n]:y
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
       It will take a few minutes.
Input the bits in the modulus[default = 512]:
Generating keys...
.............++++++++++++
..++++++++++++
.......................++++++++
.......++++++++

[AR1]interface g0/0/0
[AR1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
[AR1-GigabitEthernet0/0/0]aaa
[AR1-aaa]local-user admin password cipher hello privilege level 3
[AR1-aaa]local-user gust password cipher nihao privilege level 1
[AR1-aaa]local-user admin service-type ssh
[AR1-aaa]local-user gust service-type ssh
[AR1-aaa]user-interface vty 0 4
[AR1-ui-vty0-4]protocol inbound ssh 
[AR1-ui-vty0-4]authentication-mode aaa
[AR1-ui-vty0-4]quit
[AR1]stelnet server enable 
[AR1]display ssh server status 
 SSH version                         :1.99  
 SSH connection timeout              :60 seconds
 SSH server key generating interval  :0 hours
 SSH Authentication retries          :3 times
 SFTP Server                         :Disable
 Stelnet server                      :Enable

AR2（192.168.1.2），配置如下：

<Huawei>system-view 
[Huawei]sysname AR2
[AR2]interface g0/0/0
[AR2-GigabitEthernet0/0/0]ip add 192.168.1.10 24
[AR2-GigabitEthernet0/0/0]quit
[AR2]ssh client first-time enable 
[AR2]stelnet 192.168.1.1
Please input the username:admin
Trying 192.168.1.1 ...
Press CTRL+K to abort
Connected to 192.168.1.1 ...
The server is not authenticated. Continue to access it? (y/n)[n]:y
Jan 22 2020 23:57:43-08:00 AR2 %%01SSH/4/CONTINUE_KEYEXCHANGE(l)[1]:The server h
ad not been authenticated in the process of exchanging keys. When deciding wheth
er to continue, the user chose Y. 
[AR2]
Save the server‘s public key? (y/n)[n]:y
The server‘s public key will be saved with the name 192.168.1.1. Please wait...

Jan 22 2020 23:57:44-08:00 AR2 %%01SSH/4/SAVE_PUBLICKEY(l)[2]:When deciding whet
her to save the server‘s public key 192.168.1.1, the user chose Y. 
[AR2]
Enter password:
<AR1>system-view 
Enter system view, return user view with Ctrl+Z.
[AR1]display ssh server session 
 --------------------------------------------------------------------
 Conn   Ver   Encry     State  Auth-type        Username
 --------------------------------------------------------------------
 VTY 0  2.0   AES       run    password         admin                           

 --------------------------------------------------------------------

HCNA实验指南-配置STelnet登陆系统

标签：管理   stat   wait   ++   use   使用   RoCE   timeout   val   

原文地址：https://blog.51cto.com/yuanshuai/2468295