标签：stat bool unsigned lag 封装 没有 targe 做了 参考资料
转自：https://www.cnblogs.com/dakewei/p/10991941.html
分析用的内核版本为5.1.3
1.MFD全称
Multi-function Device,多功能设备
2. 为何会出现MFD子系统
由于出现了一类具有多种功能的外围设备或cpu内部集成的硬件模块
3. 有哪些多功能设备呢?
3.1 PMIC,电源管理芯片
da9063: 调节器,led控制器,看门狗,实时时钟控制器,温度传感器,震动马达驱动,长按关机功能(ON key)
max77843: 调节器,充电器,燃油量表,触觉反馈,led控制器,micro USB接口控制器
wm831x: 调节器,时钟,实时时钟控制器,看门狗,触摸控制器,温度传感器,背光控制器,状态led控制器,GPIO,长按关机功能(ON key),ADC
其它: 甚至具有codec功能
3.2 atmel-hlcdc: 显示控制器和背光pwm
3.3 Diolan DLN2: USB转I2C,SPI和GPIO控制器
3.4 Realtek PCI-E读卡器: SD/MMC和记忆棒读取器
4. MFD子系统解决的主要问题
在不同的内核子系统中注册这些驱动。特别是外部外围设备仅仅由一个结构体struct device(或是指定的i2c_client或spi_device)呈现
5. MFD子系统的优点有哪些?
5.1 允许在多个子系统中注册相同的设备
5.2 MFD驱动必须能否复用总线(主要是关于锁的处理)和处理中断请求
5.3 处理时钟
5.4 需要配置IP
5.5 允许驱动重用,多个多功能设备能重用其它子系统中的驱动
6. MFD提供的API
int mfd_add_devices(struct device *parent,int id,
const struct mfd_cell *cells, int n_devs,
struct resource *mem_base,
int irq_base, struct irq_domain *irq_domain);
extern void mfd_remove_devices(struct device *parent);
这些接口定义在include/linux/mfd/core.h中,在drivers/mfd/mtd-core.c中被实现
7. MFD提供的结构体
struct mfd_cell {
const char *name;
int id;
/* refcounting for multiple drivers to use a single cell */
atomic_t *usage_count;
int (*enable)(struct platform_device *dev);
int (*disable)(struct platform_device *dev);
int (*suspend)(struct platform_device *dev);
int (*resume)(struct platform_device *dev);
/* platform data passed to the sub devices drivers */
void *platform_data;
size_t pdata_size;
/* device properties passed to the sub devices drivers */
struct property_entry *properties;
/*
* Device Tree compatible string
* See: Documentation/devicetree/usage-model.txt Chapter 2.2 for details
*/
const char *of_compatible;
/* Matches ACPI */
const struct mfd_cell_acpi_match *acpi_match;
/*
* These resources can be specified relative to the parent device.
* For accessing hardware you should use resources from the platform dev
*/
int num_resources;
const struct resource *resources;
/* don‘t check for resource conflicts */
bool ignore_resource_conflicts;
/*
* Disable runtime PM callbacks for this subdevice - see
* pm_runtime_no_callbacks().
*/
bool pm_runtime_no_callbacks;
/* A list of regulator supplies that should be mapped to the MFD
* device rather than the child device when requested
*/
const char * const *parent_supplies;
int num_parent_supplies;
};
8. 示例分析
8.1 分析tps6507x的多功能驱动
8.1.1 涉及的文件
drivers/mfd/tps6507x.c
include/linux/mfd/tps6507x.h
drivers/regulator/tps6507x-regulator.c
drivers/input/touchscreen/tps6507x-ts.c
8.1.2 涉及的结构体
static const struct mfd_cell tps6507x_devs[] = {
{
.name = "tps6507x-pmic",
},
{
.name = "tps6507x-ts",
},
};
从以上结构体可以得出,tps6507x系列芯片提供两种功能: 电源管理功能(regulator)+触摸屏功能(touchscreen)
static struct i2c_driver tps6507x_i2c_driver = {
.driver = {
.name = "tps6507x",
.of_match_table = of_match_ptr(tps6507x_of_match),
},
.probe = tps6507x_i2c_probe,
.id_table = tps6507x_i2c_id,
};
这个结构体为tps6507x提供探测函数tps6507x_i2c_probe
struct tps6507x_dev {
struct device *dev;
struct i2c_client *i2c_client;
int (*read_dev)(struct tps6507x_dev *tps6507x, char reg, int size,
void *dest);
int (*write_dev)(struct tps6507x_dev *tps6507x, char reg, int size,
void *src);
/* Client devices */
struct tps6507x_pmic *pmic;
};
tps6507x 的读写接口就是放在这个结构体中,这也就是所谓的共性
8.1.3 对tps6507x进行初始化
subsys_initcall(tps6507x_i2c_init);
调用路径如下:
tps6507x_i2c_init->i2c_add_driver
8.1.4 探测函数tps6507x_i2c_probe做了些什么？
注册tps6507x的读写函数: tps6507x_i2c_read_device和tps6507x_i2c_write_device到结构体struct tps6507x_dev中
8.1.5 tps6507x的两种功能实现在哪里呢?
drivers/regulator/tps6507x-regulator.c,这里面实现电源管理功能（电压调节器驱动）
drivers/input/touchscreen/tps6507x-ts.c,这里面实现触摸屏功能
8.1.6 tps6507x电压调节器驱动
8.1.6.1 调用路径
subsys_initcall(tps6507x_pmic_init);
tps6507x_pmic_init->platform_driver_register
8.1.6.2 探测函数tps6507x_pmic_probe干了些什么?
获取共用的结构体struct tps6507x_dev
再注册相关的结构体以便提供pmic的相关操作接口,如下:
static struct regulator_ops tps6507x_pmic_ops = {
.is_enabled = tps6507x_pmic_is_enabled, 检查tps6507x的pmic功能是否已经使能了
.enable = tps6507x_pmic_enable, 使能tps6507x的pmic功能
.disable = tps6507x_pmic_disable, 禁用tsp6507x的pmic功能
.get_voltage_sel = tps6507x_pmic_get_voltage_sel, 获取电压值
.set_voltage_sel = tps6507x_pmic_set_voltage_sel, 设置电压值
.list_voltage = regulator_list_voltage_table, 列出电压表
.map_voltage = regulator_map_voltage_ascend,
};
8.1.7 tps6507x触摸屏驱动
8.1.7.1 驱动在哪里?
drivers/input/touchscreen/tps6507x-ts.c
8.1.7.2 分析probe函数都做了些什么?
获取公用的结构体struct tps6507x_dev
填充结构体struct tps6507x_ts，关键是注册了函数tps6507x_ts_poll
8.2 分析da9063相关驱动
8.2.1 mfd驱动
8.2.1.1 相关源码
drivers/mfd/da9063-i2c.c
8.2.1.2 分析探测函数da9063_i2c_probe的调用路径
da9063_i2c_probe->da9063_device_init
8.2.1.3 da9063_device_init做了些什么?
读取da9063的芯片ID，检查是否匹配
读取da9063的variant ID,不同的variant ID表示不同的封装
通过接口devm_mfd_add_devices添加具体的结构体struct mfd_cell数组,这个数组里包含了多个驱动相关的信息,如名字，资源等
8.2.1.4 结构体数组da906_common_devs
static const struct mfd_cell da9063_common_devs[] = {
{
.name = DA9063_DRVNAME_REGULATORS,
.num_resources = ARRAY_SIZE(da9063_regulators_resources),
.resources = da9063_regulators_resources,
},
{
.name = DA9063_DRVNAME_LEDS,
},
{
.name = DA9063_DRVNAME_WATCHDOG,
.of_compatible = "dlg,da9063-watchdog",
},
{
.name = DA9063_DRVNAME_HWMON,
.num_resources = ARRAY_SIZE(da9063_hwmon_resources),
.resources = da9063_hwmon_resources,
},
{
.name = DA9063_DRVNAME_ONKEY,
.num_resources = ARRAY_SIZE(da9063_onkey_resources),
.resources = da9063_onkey_resources,
.of_compatible = "dlg,da9063-onkey",
},
{
.name = DA9063_DRVNAME_VIBRATION,
},
};
这个结构体数组中就包含了调节器，led控制器，看门狗，硬件监测（电压监测，温度监测），长按关键功能（onkey），震动等驱动名称，也就是da9063会关联（具有）这些功能,da9063有两种硬件版本，一种为DA9063,另一种为DA9063L,这两种硬件的差异在于DA9063具有实时时钟功能，而后者没有此功能
8.2.1.5 结构体数组da9063_devs
/* Only present on DA9063 , not on DA9063L */
static const struct mfd_cell da9063_devs[] = {
{
.name = DA9063_DRVNAME_RTC,
.num_resources = ARRAY_SIZE(da9063_rtc_resources),
.resources = da9063_rtc_resources,
.of_compatible = "dlg,da9063-rtc",
},
};
8.2.1.6 da9063_common_devs和da9063_devs中的这些具体的驱动实现在哪里?
drivers/regulator/da9063-regulator.c (调节器驱动)
(没有找到da9063的led控制器驱动)
drivers/watchdog/da9063_wdt.c (看门狗驱动)
(没有找到da9063的硬件监测驱动)
drivers/input/misc/da9063_onkey.c （onkey驱动）
(没有找到da9063的震动功能驱动)
drivers/rtc/rtc-da9063.c (实时时钟驱动)
8.2.1.7 重要的结构体struct da9063
struct da9063 {
/* Device */
struct device *dev;
enum da9063_type type;
unsigned char variant_code;
unsigned int flags;
/* Control interface */
struct regmap *regmap;
/* Interrupts */
int chip_irq;
unsigned int irq_base;
struct regmap_irq_chip_data *regmap_irq;
};
参考资料:
标签：stat bool unsigned lag 封装 没有 targe 做了 参考资料
原文地址：https://www.cnblogs.com/sky-heaven/p/12746329.html
