码迷,mamicode.com
首页 > Web开发 > 详细

kubernetes v1.18.2 部署calico

时间:2020-05-08 09:19:54      阅读:128      评论:0      收藏:0      [点我收藏+]

标签:cidr   mask   bec   eth0   portmap   kubecon   dom   remove   extern   

calico 注意点 (50节点以内部署方案)
# 下载calico yaml 文件
wget https://docs.projectcalico.org/manifests/calico.yaml
# 如果cni配置没放到默认路径请创建软链
ln -s /apps/cni/etc /etc/cni
# 删除旧cni 配置
rm -rf  /apps/cni/etc/*
# 修改CALICO_IPV4POOL_CIDR 
CALICO_IPV4POOL_CIDR: 10.80.0.0/12
# 修改CALICO_IPV4POOL_IPIP: Never 启用bgp模式 云环境不要这样修改
# 修改 cni 配置及DirectoryOrCreate 配置路径为kubelet 配置路径

calico.yaml 内容

vim calico.yaml 
---
# Source: calico/templates/calico-config.yaml
# This ConfigMap is used to configure a self-hosted Calico installation.
kind: ConfigMap
apiVersion: v1
metadata:
  name: calico-config
  namespace: kube-system
data:
  # Typha is disabled.
  typha_service_name: "none"
  # Configure the backend to use.
  calico_backend: "bird"

  # Configure the MTU to use
  veth_mtu: "1440"

  # The CNI network configuration to install on each node.  The special
  # values in this config will be automatically populated.
  cni_network_config: |-
    {
      "name": "k8s-pod-network",
      "cniVersion": "0.3.1",
      "plugins": [
        {
          "type": "calico",
          "log_level": "info",
          "datastore_type": "kubernetes",
          "nodename": "__KUBERNETES_NODE_NAME__",
          "mtu": __CNI_MTU__,
          "ipam": {
              "type": "calico-ipam"
          },
          "policy": {
              "type": "k8s"
          },
          "kubernetes": {
              "kubeconfig": "__KUBECONFIG_FILEPATH__"
          }
        },
        {
          "type": "portmap",
          "snat": true,
          "capabilities": {"portMappings": true}
        },
        {
          "type": "bandwidth",
          "capabilities": {"bandwidth": true}
        },
        {
         "name": "mytuning",
         "type": "tuning",
         "sysctl": {
               "net.core.somaxconn": "65535",
               "net.ipv4.ip_local_port_range": "1024 65535",
               "net.ipv4.tcp_keepalive_time": "600",
               "net.ipv4.tcp_keepalive_probes": "10",
               "net.ipv4.tcp_keepalive_intvl": "30"
         }
        }
      ]
    }

---
# Source: calico/templates/kdd-crds.yaml

apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: bgpconfigurations.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: BGPConfiguration
    plural: bgpconfigurations
    singular: bgpconfiguration

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: bgppeers.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: BGPPeer
    plural: bgppeers
    singular: bgppeer

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: blockaffinities.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: BlockAffinity
    plural: blockaffinities
    singular: blockaffinity

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: clusterinformations.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: ClusterInformation
    plural: clusterinformations
    singular: clusterinformation

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: felixconfigurations.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: FelixConfiguration
    plural: felixconfigurations
    singular: felixconfiguration

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: globalnetworkpolicies.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: GlobalNetworkPolicy
    plural: globalnetworkpolicies
    singular: globalnetworkpolicy

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: globalnetworksets.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: GlobalNetworkSet
    plural: globalnetworksets
    singular: globalnetworkset

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: hostendpoints.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: HostEndpoint
    plural: hostendpoints
    singular: hostendpoint

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: ipamblocks.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: IPAMBlock
    plural: ipamblocks
    singular: ipamblock

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: ipamconfigs.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: IPAMConfig
    plural: ipamconfigs
    singular: ipamconfig

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: ipamhandles.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: IPAMHandle
    plural: ipamhandles
    singular: ipamhandle

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: ippools.crd.projectcalico.org
spec:
  scope: Cluster
  group: crd.projectcalico.org
  version: v1
  names:
    kind: IPPool
    plural: ippools
    singular: ippool

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: networkpolicies.crd.projectcalico.org
spec:
  scope: Namespaced
  group: crd.projectcalico.org
  version: v1
  names:
    kind: NetworkPolicy
    plural: networkpolicies
    singular: networkpolicy

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: networksets.crd.projectcalico.org
spec:
  scope: Namespaced
  group: crd.projectcalico.org
  version: v1
  names:
    kind: NetworkSet
    plural: networksets
    singular: networkset

---
---
# Source: calico/templates/rbac.yaml

# Include a clusterrole for the kube-controllers component,
# and bind it to the calico-kube-controllers serviceaccount.
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: calico-kube-controllers
rules:
  # Nodes are watched to monitor for deletions.
  - apiGroups: [""]
    resources:
      - nodes
    verbs:
      - watch
      - list
      - get
  # Pods are queried to check for existence.
  - apiGroups: [""]
    resources:
      - pods
    verbs:
      - get
  # IPAM resources are manipulated when nodes are deleted.
  - apiGroups: ["crd.projectcalico.org"]
    resources:
      - ippools
    verbs:
      - list
  - apiGroups: ["crd.projectcalico.org"]
    resources:
      - blockaffinities
      - ipamblocks
      - ipamhandles
    verbs:
      - get
      - list
      - create
      - update
      - delete
  # Needs access to update clusterinformations.
  - apiGroups: ["crd.projectcalico.org"]
    resources:
      - clusterinformations
    verbs:
      - get
      - create
      - update
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: calico-kube-controllers
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: calico-kube-controllers
subjects:
- kind: ServiceAccount
  name: calico-kube-controllers
  namespace: kube-system
---
# Include a clusterrole for the calico-node DaemonSet,
# and bind it to the calico-node serviceaccount.
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: calico-node
rules:
  # The CNI plugin needs to get pods, nodes, and namespaces.
  - apiGroups: [""]
    resources:
      - pods
      - nodes
      - namespaces
    verbs:
      - get
  - apiGroups: [""]
    resources:
      - endpoints
      - services
    verbs:
      # Used to discover service IPs for advertisement.
      - watch
      - list
      # Used to discover Typhas.
      - get
  # Pod CIDR auto-detection on kubeadm needs access to config maps.
  - apiGroups: [""]
    resources:
      - configmaps
    verbs:
      - get
  - apiGroups: [""]
    resources:
      - nodes/status
    verbs:
      # Needed for clearing NodeNetworkUnavailable flag.
      - patch
      # Calico stores some configuration information in node annotations.
      - update
  # Watch for changes to Kubernetes NetworkPolicies.
  - apiGroups: ["networking.k8s.io"]
    resources:
      - networkpolicies
    verbs:
      - watch
      - list
  # Used by Calico for policy information.
  - apiGroups: [""]
    resources:
      - pods
      - namespaces
      - serviceaccounts
    verbs:
      - list
      - watch
  # The CNI plugin patches pods/status.
  - apiGroups: [""]
    resources:
      - pods/status
    verbs:
      - patch
  # Calico monitors various CRDs for config.
  - apiGroups: ["crd.projectcalico.org"]
    resources:
      - globalfelixconfigs
      - felixconfigurations
      - bgppeers
      - globalbgpconfigs
      - bgpconfigurations
      - ippools
      - ipamblocks
      - globalnetworkpolicies
      - globalnetworksets
      - networkpolicies
      - networksets
      - clusterinformations
      - hostendpoints
      - blockaffinities
    verbs:
      - get
      - list
      - watch
  # Calico must create and update some CRDs on startup.
  - apiGroups: ["crd.projectcalico.org"]
    resources:
      - ippools
      - felixconfigurations
      - clusterinformations
    verbs:
      - create
      - update
  # Calico stores some configuration information on the node.
  - apiGroups: [""]
    resources:
      - nodes
    verbs:
      - get
      - list
      - watch
  # These permissions are only requried for upgrade from v2.6, and can
  # be removed after upgrade or on fresh installations.
  - apiGroups: ["crd.projectcalico.org"]
    resources:
      - bgpconfigurations
      - bgppeers
    verbs:
      - create
      - update
  # These permissions are required for Calico CNI to perform IPAM allocations.
  - apiGroups: ["crd.projectcalico.org"]
    resources:
      - blockaffinities
      - ipamblocks
      - ipamhandles
    verbs:
      - get
      - list
      - create
      - update
      - delete
  - apiGroups: ["crd.projectcalico.org"]
    resources:
      - ipamconfigs
    verbs:
      - get
  # Block affinities must also be watchable by confd for route aggregation.
  - apiGroups: ["crd.projectcalico.org"]
    resources:
      - blockaffinities
    verbs:
      - watch
  # The Calico IPAM migration needs to get daemonsets. These permissions can be
  # removed if not upgrading from an installation using host-local IPAM.
  - apiGroups: ["apps"]
    resources:
      - daemonsets
    verbs:
      - get

---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: calico-node
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: calico-node
subjects:
- kind: ServiceAccount
  name: calico-node
  namespace: kube-system

---
# Source: calico/templates/calico-node.yaml
# This manifest installs the calico-node container, as well
# as the CNI plugins and network config on
# each master and worker node in a Kubernetes cluster.
kind: DaemonSet
apiVersion: apps/v1
metadata:
  name: calico-node
  namespace: kube-system
  labels:
    k8s-app: calico-node
spec:
  selector:
    matchLabels:
      k8s-app: calico-node
  updateStrategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
  template:
    metadata:
      labels:
        k8s-app: calico-node
      annotations:
        # This, along with the CriticalAddonsOnly toleration below,
        # marks the pod as a critical add-on, ensuring it gets
        # priority scheduling and that its resources are reserved
        # if it ever gets evicted.
        scheduler.alpha.kubernetes.io/critical-pod: ‘‘
    spec:
      nodeSelector:
        kubernetes.io/os: linux
      hostNetwork: true
      tolerations:
        # Make sure calico-node gets scheduled on all nodes.
        - effect: NoSchedule
          operator: Exists
        # Mark the pod as a critical add-on for rescheduling.
        - key: CriticalAddonsOnly
          operator: Exists
        - effect: NoExecute
          operator: Exists
      serviceAccountName: calico-node
      # Minimize downtime during a rolling upgrade or deletion; tell Kubernetes to do a "force
      # deletion": https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods.
      terminationGracePeriodSeconds: 0
      priorityClassName: system-node-critical
      initContainers:
        # This container performs upgrade from host-local IPAM to calico-ipam.
        # It can be deleted if this is a fresh installation, or if you have already
        # upgraded to use calico-ipam.
        - name: upgrade-ipam
          image: calico/cni:v3.13.3
          command: ["/opt/cni/bin/calico-ipam", "-upgrade"]
          env:
            - name: KUBERNETES_NODE_NAME
              valueFrom:
                fieldRef:
                  fieldPath: spec.nodeName
            - name: CALICO_NETWORKING_BACKEND
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: calico_backend
          volumeMounts:
            - mountPath: /var/lib/cni/networks
              name: host-local-net-dir
            - mountPath: /host/opt/cni/bin
              name: cni-bin-dir
          securityContext:
            privileged: true
        # This container installs the CNI binaries
        # and CNI network config file on each node.
        - name: install-cni
          image: calico/cni:v3.13.3
          command: ["/install-cni.sh"]
          env:
            # Name of the CNI config file to create.
            - name: CNI_CONF_NAME
              value: "10-calico.conflist"
            # The CNI network config to install on each node.
            - name: CNI_NETWORK_CONFIG
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: cni_network_config
            # Set the hostname based on the k8s node name.
            - name: KUBERNETES_NODE_NAME
              valueFrom:
                fieldRef:
                  fieldPath: spec.nodeName
            # CNI MTU Config variable
            - name: CNI_MTU
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: veth_mtu
            # Prevents the container from sleeping forever.
            - name: SLEEP
              value: "false"
          volumeMounts:
            - mountPath: /host/opt/cni/bin
              name: cni-bin-dir
            - mountPath: /host/etc/cni/net.d
              name: cni-net-dir
          securityContext:
            privileged: true
        # Adds a Flex Volume Driver that creates a per-pod Unix Domain Socket to allow Dikastes
        # to communicate with Felix over the Policy Sync API.
        - name: flexvol-driver
          image: calico/pod2daemon-flexvol:v3.13.3
          volumeMounts:
          - name: flexvol-driver-host
            mountPath: /host/driver
          securityContext:
            privileged: true
      containers:
        # Runs calico-node container on each Kubernetes node.  This
        # container programs network policy and routes on each
        # host.
        - name: calico-node
          image: calico/node:v3.13.3
          env:
            # Use Kubernetes API as the backing datastore.
            - name: DATASTORE_TYPE
              value: "kubernetes"
            # Wait for the datastore.
            - name: WAIT_FOR_DATASTORE
              value: "true"
            # Set based on the k8s node name.
            - name: NODENAME
              valueFrom:
                fieldRef:
                  fieldPath: spec.nodeName
            # Choose the backend to use.
            - name: CALICO_NETWORKING_BACKEND
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: calico_backend
            # Cluster type to identify the deployment type
            - name: CLUSTER_TYPE
              value: "k8s,bgp"
            # Auto-detect the BGP IP address.
            - name: IP
              value: "autodetect"
            # Enable IPIP
            - name: CALICO_IPV4POOL_IPIP
              value: "Never"
            # Set MTU for tunnel device used if ipip is enabled
            - name: FELIX_IPINIPMTU
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: veth_mtu
            # The default IPv4 pool to create on startup if none exists. Pod IPs will be
            # chosen from this range. Changing this value after installation will have
            # no effect. This should fall within `--cluster-cidr`.
            - name: CALICO_IPV4POOL_CIDR
              value: "10.80.0.0/12"
            # Disable file logging so `kubectl logs` works.
            - name: CALICO_DISABLE_FILE_LOGGING
              value: "true"
            # Set Felix endpoint to host default action to ACCEPT.
            - name: FELIX_DEFAULTENDPOINTTOHOSTACTION
              value: "ACCEPT"
            # Disable IPv6 on Kubernetes.
            - name: FELIX_IPV6SUPPORT
              value: "false"
            # Set Felix logging to "info"
            - name: FELIX_LOGSEVERITYSCREEN
              value: "info"
            - name: FELIX_HEALTHENABLED
              value: "true"
          securityContext:
            privileged: true
          resources:
            requests:
              cpu: 250m
          livenessProbe:
            exec:
              command:
              - /bin/calico-node
              - -felix-live
              - -bird-live
            periodSeconds: 10
            initialDelaySeconds: 10
            failureThreshold: 6
          readinessProbe:
            exec:
              command:
              - /bin/calico-node
              - -felix-ready
              - -bird-ready
            periodSeconds: 10
          volumeMounts:
            - mountPath: /lib/modules
              name: lib-modules
              readOnly: true
            - mountPath: /run/xtables.lock
              name: xtables-lock
              readOnly: false
            - mountPath: /var/run/calico
              name: var-run-calico
              readOnly: false
            - mountPath: /var/lib/calico
              name: var-lib-calico
              readOnly: false
            - name: policysync
              mountPath: /var/run/nodeagent
      volumes:
        # Used by calico-node.
        - name: lib-modules
          hostPath:
            path: /lib/modules
        - name: var-run-calico
          hostPath:
            path: /var/run/calico
        - name: var-lib-calico
          hostPath:
            path: /var/lib/calico
        - name: xtables-lock
          hostPath:
            path: /run/xtables.lock
            type: FileOrCreate
        # Used to install CNI.
        - name: cni-bin-dir
          hostPath:
            path: /apps/cni/bin
        - name: cni-net-dir
          hostPath:
            path: /apps/cni/etc/net.d
        # Mount in the directory for host-local IPAM allocations. This is
        # used when upgrading from host-local to calico-ipam, and can be removed
        # if not using the upgrade-ipam init container.
        - name: host-local-net-dir
          hostPath:
            path: /var/lib/cni/networks
        # Used to create per-pod Unix Domain Sockets
        - name: policysync
          hostPath:
            type: DirectoryOrCreate
            path: /var/run/nodeagent
        # Used to install Flex Volume Driver
        - name: flexvol-driver-host
          hostPath:
            type: DirectoryOrCreate
            path: /apps/k8s/kubelet-plugins/volume/exec/nodeagent~uds
---

apiVersion: v1
kind: ServiceAccount
metadata:
  name: calico-node
  namespace: kube-system

---
# Source: calico/templates/calico-kube-controllers.yaml

# See https://github.com/projectcalico/kube-controllers
apiVersion: apps/v1
kind: Deployment
metadata:
  name: calico-kube-controllers
  namespace: kube-system
  labels:
    k8s-app: calico-kube-controllers
spec:
  # The controllers can only have a single active instance.
  replicas: 1
  selector:
    matchLabels:
      k8s-app: calico-kube-controllers
  strategy:
    type: Recreate
  template:
    metadata:
      name: calico-kube-controllers
      namespace: kube-system
      labels:
        k8s-app: calico-kube-controllers
      annotations:
        scheduler.alpha.kubernetes.io/critical-pod: ‘‘
    spec:
      nodeSelector:
        kubernetes.io/os: linux
      tolerations:
        # Mark the pod as a critical add-on for rescheduling.
        - key: CriticalAddonsOnly
          operator: Exists
        - key: node-role.kubernetes.io/master
          effect: NoSchedule
      serviceAccountName: calico-kube-controllers
      priorityClassName: system-cluster-critical
      containers:
        - name: calico-kube-controllers
          image: calico/kube-controllers:v3.13.3
          env:
            # Choose which controllers to run.
            - name: ENABLED_CONTROLLERS
              value: node
            - name: DATASTORE_TYPE
              value: kubernetes
          readinessProbe:
            exec:
              command:
              - /usr/bin/check-status
              - -r

---

apiVersion: v1
kind: ServiceAccount
metadata:
  name: calico-kube-controllers
  namespace: kube-system
---
# Source: calico/templates/calico-etcd-secrets.yaml

---
# Source: calico/templates/calico-typha.yaml

---
# Source: calico/templates/configure-canal.yaml

部署 calico

root@Qist:/mnt/g/work/ipv6/1# kubectl apply -f calico.yaml
configmap/calico-config created
customresourcedefinition.apiextensions.k8s.io/bgpconfigurations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/bgppeers.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/blockaffinities.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/clusterinformations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/felixconfigurations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/globalnetworkpolicies.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/globalnetworksets.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/hostendpoints.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamblocks.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamconfigs.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamhandles.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ippools.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/networkpolicies.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/networksets.crd.projectcalico.org created
clusterrole.rbac.authorization.k8s.io/calico-kube-controllers created
clusterrolebinding.rbac.authorization.k8s.io/calico-kube-controllers created
clusterrole.rbac.authorization.k8s.io/calico-node created
clusterrolebinding.rbac.authorization.k8s.io/calico-node created
daemonset.apps/calico-node created
serviceaccount/calico-node created
deployment.apps/calico-kube-controllers created
serviceaccount/calico-kube-controllers created
# 等待部署完成
root@Qist:/mnt/g/work/ipv6/1# kubectl -n kube-system  get pod
NAME                                       READY   STATUS              RESTARTS   AGE
calico-kube-controllers-6fcbbfb6fb-sbxq8   0/1     ContainerCreating   0          50s
calico-node-78lh6                          0/1     Init:0/3            0          50s
calico-node-9cwtl                          0/1     Init:1/3            0          50s
calico-node-cg5ps                          0/1     Init:0/3            0          50s
calico-node-cr5fc                          0/1     Init:0/3            0          51s
calico-node-sctf8                          0/1     Init:0/3             0          50s
ha-proxy-k8s-master-1                      1/1     Running             1          36m
ha-proxy-k8s-master-2                      1/1     Running             0          36m
ha-proxy-k8s-master-3                      1/1     Running             1          36m
ha-proxy-k8s-node-1                        1/1     Running             1          36m
ha-proxy-k8s-node-2                        1/1     Running             1          36m

验证calico 网络

# pod 已经全部运行
root@Qist:/mnt/g/work/ipv6/1# kubectl -n kube-system  get pod -o wide
NAME                                       READY   STATUS    RESTARTS   AGE   IP              NODE           NOMINATED NODE   READINESS GATES
calico-kube-controllers-6fcbbfb6fb-sbxq8   1/1     Running   0          28m   10.83.196.192   k8s-master-3   <none>           <none>
calico-node-78lh6                          1/1     Running   0          28m   192.168.2.175   k8s-master-1   <none>           <none>
calico-node-9cwtl                          1/1     Running   0          28m   192.168.2.187   k8s-node-2     <none>           <none>
calico-node-cg5ps                          1/1     Running   0          28m   192.168.2.185   k8s-node-1     <none>           <none>
calico-node-cr5fc                          1/1     Running   0          28m   192.168.2.177   k8s-master-3   <none>           <none>
calico-node-sctf8                          1/1     Running   0          28m   192.168.2.176   k8s-master-2   <none>           <none>
ha-proxy-k8s-master-1                      1/1     Running   1          64m   192.168.2.175   k8s-master-1   <none>           <none>
ha-proxy-k8s-master-2                      1/1     Running   1          64m   192.168.2.176   k8s-master-2   <none>           <none>
ha-proxy-k8s-master-3                      1/1     Running   1          64m   192.168.2.177   k8s-master-3   <none>           <none>
ha-proxy-k8s-node-1                        1/1     Running   1          64m   192.168.2.185   k8s-node-1     <none>           <none>
ha-proxy-k8s-node-2                        1/1     Running   1          64m   192.168.2.187   k8s-node-2     <none>           <none>
# 查看路由
[root@k8s-master-1 nodeagent~uds]# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.2.2     0.0.0.0         UG    100    0        0 eth0
10.83.196.192   192.168.2.177   255.255.255.192 UG    0      0        0 eth0
192.168.2.0     0.0.0.0         255.255.254.0   U     100    0        0 eth0
#  部署一个应用
kubectl create deployment myip --image=cloudnativelabs/whats-my-ip 
# 暴露端口
kubectl expose deployment myip --port=8080 --target-port=8080
root@Qist:/mnt/g/work/ipv6/1# kubectl get pod -o wide
NAME                    READY   STATUS    RESTARTS   AGE   IP              NODE           NOMINATED NODE   READINESS GATES
myip-75c9c47c7f-5ms94   1/1     Running   0          43s   10.87.152.128   k8s-master-2   <none>           <none>
root@Qist:/mnt/g/work/ipv6/1# kubectl get svc
NAME         TYPE        CLUSTER-IP    EXTERNAL-IP   PORT(S)    AGE
kubernetes   ClusterIP   10.66.0.1     <none>        443/TCP    100m
myip         ClusterIP   10.66.82.41   <none>        8080/TCP   27s
# 验证集群IP 及pod IP 能否正常访问
[root@k8s-master-1 nodeagent~uds]# curl 10.66.82.41:8080
HOSTNAME:myip-75c9c47c7f-5ms94 IP:10.87.152.128
[root@k8s-master-1 nodeagent~uds]# curl 10.87.152.128:8080
HOSTNAME:myip-75c9c47c7f-5ms94 IP:10.87.152.128

kubernetes v1.18.2 部署calico

标签:cidr   mask   bec   eth0   portmap   kubecon   dom   remove   extern   

原文地址:https://blog.51cto.com/juestnow/2493052

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!