MongoDB -MSC集群的部署

一.Shard节点配置过程

1. 目录创建：
mkdir -p /mongodb/38021/conf  /mongodb/38021/log  /mongodb/38021/data
mkdir -p /mongodb/38022/conf  /mongodb/38022/log  /mongodb/38022/data
mkdir -p /mongodb/38023/conf  /mongodb/38023/log  /mongodb/38023/data
mkdir -p /mongodb/38024/conf  /mongodb/38024/log  /mongodb/38024/data
mkdir -p /mongodb/38025/conf  /mongodb/38025/log  /mongodb/38025/data
mkdir -p /mongodb/38026/conf  /mongodb/38026/log  /mongodb/38026/data

2. 修改配置文件：
第一组复制集搭建：21-23（1主 1从 1Arb）
cat >  /mongodb/38021/conf/mongodb.conf  <<EOF
systemLog:
  destination: file
  path: /mongodb/38021/log/mongodb.log  
  logAppend: true
storage:
  journal:
    enabled: true
  dbPath: /mongodb/38021/data
  directoryPerDB: true
  #engine: wiredTiger
  wiredTiger:
    engineConfig:
      cacheSizeGB: 1
      directoryForIndexes: true
    collectionConfig:
      blockCompressor: zlib
    indexConfig:
      prefixCompression: true
net:
  bindIp: 10.0.0.51,127.0.0.1
  port: 38021
replication:
  oplogSizeMB: 2048
  replSetName: sh1
sharding:
  clusterRole: shardsvr
processManagement:
  fork: true
EOF
\cp  /mongodb/38021/conf/mongodb.conf  /mongodb/38022/conf/
\cp  /mongodb/38021/conf/mongodb.conf  /mongodb/38023/conf/

sed ‘s#38021#38022#g‘ /mongodb/38022/conf/mongodb.conf -i
sed ‘s#38021#38023#g‘ /mongodb/38023/conf/mongodb.conf -i
第二组节点：24-26(1主1从1Arb)
cat > /mongodb/38024/conf/mongodb.conf <<EOF
systemLog:
  destination: file
  path: /mongodb/38024/log/mongodb.log  
  logAppend: true
storage:
  journal:
    enabled: true
  dbPath: /mongodb/38024/data
  directoryPerDB: true
  wiredTiger:
    engineConfig:
      cacheSizeGB: 1
      directoryForIndexes: true
    collectionConfig:
      blockCompressor: zlib
    indexConfig:
      prefixCompression: true
net:
  bindIp: 10.0.0.51,127.0.0.1
  port: 38024
replication:
  oplogSizeMB: 2048
  replSetName: sh2
sharding:
  clusterRole: shardsvr
processManagement:
  fork: true
EOF

\cp  /mongodb/38024/conf/mongodb.conf  /mongodb/38025/conf/
\cp  /mongodb/38024/conf/mongodb.conf  /mongodb/38026/conf/
sed ‘s#38024#38025#g‘ /mongodb/38025/conf/mongodb.conf -i
sed ‘s#38024#38026#g‘ /mongodb/38026/conf/mongodb.conf -i
3.启动所有节点，并搭建复制集
mongod -f  /mongodb/38021/conf/mongodb.conf
mongod -f  /mongodb/38022/conf/mongodb.conf
mongod -f  /mongodb/38023/conf/mongodb.conf
mongod -f  /mongodb/38024/conf/mongodb.conf
mongod -f  /mongodb/38025/conf/mongodb.conf
mongod -f  /mongodb/38026/conf/mongodb.conf 
ps -ef |grep mongod

mongo --port 38021
use  admin
config = {_id: ‘sh1‘, members: [
                          {_id: 0, host: ‘10.0.0.51:38021‘},
                          {_id: 1, host: ‘10.0.0.51:38022‘},
                          {_id: 2, host: ‘10.0.0.51:38023‘,"arbiterOnly":true}]
           }

rs.initiate(config)
 
 mongo --port 38024
 use admin
config = {_id: ‘sh2‘, members: [
                          {_id: 0, host: ‘10.0.0.51:38024‘},
                          {_id: 1, host: ‘10.0.0.51:38025‘},
                          {_id: 2, host: ‘10.0.0.51:38026‘,"arbiterOnly":true}]
           }
 
rs.initiate(config)

4. config节点配置
5. 目录创建
mkdir -p /mongodb/38018/conf  /mongodb/38018/log  /mongodb/38018/data
mkdir -p /mongodb/38019/conf  /mongodb/38019/log  /mongodb/38019/data
mkdir -p /mongodb/38020/conf  /mongodb/38020/log  /mongodb/38020/data
6.修改配置文件：
cat > /mongodb/38018/conf/mongodb.conf <<EOF
systemLog:
  destination: file
  path: /mongodb/38018/log/mongodb.conf
  logAppend: true
storage:
  journal:
    enabled: true
  dbPath: /mongodb/38018/data
  directoryPerDB: true
  #engine: wiredTiger
  wiredTiger:
    engineConfig:
      cacheSizeGB: 1
      directoryForIndexes: true
    collectionConfig:
      blockCompressor: zlib
    indexConfig:
      prefixCompression: true
net:
  bindIp: 10.0.0.51,127.0.0.1
  port: 38018
replication:
  oplogSizeMB: 2048
  replSetName: configReplSet
sharding:
  clusterRole: configsvr
processManagement:
  fork: true
EOF

\cp /mongodb/38018/conf/mongodb.conf /mongodb/38019/conf/
\cp /mongodb/38018/conf/mongodb.conf /mongodb/38020/conf/
sed ‘s#38018#38019#g‘ /mongodb/38019/conf/mongodb.conf -i
sed ‘s#38018#38020#g‘ /mongodb/38020/conf/mongodb.conf -i
7.启动节点，并配置复制集
mongod -f /mongodb/38018/conf/mongodb.conf
mongod -f /mongodb/38019/conf/mongodb.conf
mongod -f /mongodb/38020/conf/mongodb.conf

mongo --port 38018
use  admin
 config = {_id: ‘configReplSet‘, members: [
                          {_id: 0, host: ‘10.0.0.51:38018‘},
                          {_id: 1, host: ‘10.0.0.51:38019‘},
                          {_id: 2, host: ‘10.0.0.51:38020‘}]
           }
rs.initiate(config) 
 
注：configserver 可以是一个节点，官方建议复制集。configserver不能有arbiter。
新版本中，要求必须是复制集。
注：mongodb 3.4之后，虽然要求config server为replica set，但是不支持arbiter

 

8. mongos节点配置：
9.创建目录：
mkdir -p /mongodb/38017/conf  /mongodb/38017/log
10.配置文件：
cat > /mongodb/38017/conf/mongos.conf <<EOF
systemLog:
  destination: file
  path: /mongodb/38017/log/mongos.log
  logAppend: true
net:
  bindIp: 10.0.0.51,127.0.0.1
  port: 38017
sharding:
  configDB: configReplSet/10.0.0.51:38018,10.0.0.51:38019,10.0.0.51:38020
processManagement:
  fork: true
EOF
11.启动mongos
 mongos -f /mongodb/38017/conf/mongos.conf
12. 分片集群添加节点
 连接到其中一个mongos（10.0.0.51），做以下配置
（1）连接到mongs的admin数据库
# su - mongod
$ mongo 10.0.0.51:38017/admin
（2）添加分片
db.runCommand( { addshard : "sh1/10.0.0.51:38021,10.0.0.51:38022,10.0.0.51:38023",name:"shard1"} )
db.runCommand( { addshard : "sh2/10.0.0.51:38024,10.0.0.51:38025,10.0.0.51:38026",name:"shard2"} )
（3）列出分片
mongos> db.runCommand( { listshards : 1 } )
（4）整体状态查看
mongos> sh.status();