标签：clr try 赋值 else base 动态 使用 def alignment
.Net Core CLR 的GC分为两个部分，一个是GC的内存分配，另外一个是GC的垃圾回收。这里我们先讲一下垃圾回收。
一.垃圾回收的触发条件
1.在C#代码中调用 GC.Collection();
2.物理内存不足的情况下
3.分配量超过分配阈值
4.找不到可分配的内存空间
在满足了以上四个条件中的任何一个，CLR都会触发GC的垃圾回收，清理托管堆空间释放内存，以便下次使用。
二.垃圾回收的流程
1停止其它线程到并且切换到抢占模式（抢占模式不可访问托管堆代码，只可访问非托管）
2.重新定位回收的目标代，并且判断是否执行后台GC回收
3-1.如果执行后台GC回收分为两步（第一：后台标记（标记没被使用的托管堆空间），第二：后台清扫（清扫没被使用的托管堆空间））
3-2.如果不执行后台GC，则执行普通GC，普通GC一共分为五个阶段（1，标记。2计划。3.重定位。4.压缩。5清扫。）
4.恢复其它线程到合作模式
以上为GC垃圾回收的全部过程。
每次GC结束之后，都会重新计算分配量的阈值，以便下次分配对象使用，代码如下：
size_t gc_heap::desired_new_allocation (dynamic_data* dd,// 动态数据 size_t out,// GC 结束之后该代存活对象的大小 int gen_number, // 被GC的代 int pass) { gc_history_per_heap* current_gc_data_per_heap = get_gc_data_per_heap(); if (dd_begin_data_size (dd) == 0)//假如说GC 开始前该代存活对象大小为零 { size_t new_allocation = dd_min_size (dd);// 获取阈值的下限赋值给新的分配量new_allocation current_gc_data_per_heap->gen_data[gen_number].new_allocation = new_allocation; //把新分配量存入动态数据 return new_allocation;//返回 } else { float cst;// 对象存活率 size_t previous_desired_allocation = dd_desired_allocation (dd);// 就分配量阈值 size_t current_size = dd_current_size (dd);// GC 结束之后存活对象的大小 float max_limit = dd_max_limit (dd);// 获取阈值系数的上限 float limit = dd_limit (dd);// 阈值系数的下限 size_t min_gc_size = dd_min_size (dd);//阈值的下限 float f = 0;// 阈值的增长系数 size_t max_size = dd_max_size (dd);// 阈值的上限 size_t new_allocation = 0;// 声明新分配量并且赋值为零 float allocation_fraction = (float) (dd_desired_allocation (dd) - dd_gc_new_allocation (dd)) / (float) (dd_desired_allocation (dd));// 计算偏移率（allocation_fraction ），GC开始前的实际分配量/ 就分配了阈值 if (gen_number >= max_generation)// 如果GC目标大于或者等于第二代对象 { size_t new_size = 0; // 声明新分配量 cst = min (1.0f, float (out) / float (dd_begin_data_size (dd)));//GC的存活率（cst） Gc结束后该代存活对象的大小/ GC开始前该代存活对象的大小 f = surv_to_growth (cst, limit, max_limit);//通过GC的存活率，系数的上下限计算阈值增长系数 size_t max_growth_size = (size_t)(max_size / f); if (current_size >= max_growth_size)// 当GC结束后存活对象的大小大于 最大阈值 { new_size = max_size;// 把最大阈值赋值给新分配量阈值 } else// 否则 { new_size = (size_t) min (max ( (f * current_size), min_gc_size), max_size);// 阈值的增长系数F 乘以 GC结束后该代存活对象的大小和阈值下限两者取小，然后与阈值上限两者取大。得到结果为新的分配量。 } assert ((new_size >= current_size) || (new_size == max_size));// 新分配量必须大于等于GC结束后对象的大小或者 等于阈值的上限。 if (gen_number == max_generation)// GC目标代等于第二代对象 { new_allocation = max((new_size - current_size), min_gc_size); new_allocation = linear_allocation_model (allocation_fraction, new_allocation, dd_desired_allocation (dd), dd_collection_count (dd)); if ((dd_fragmentation (dd) > ((size_t)((f-1)*current_size)))) { //reducing allocation in case of fragmentation size_t new_allocation1 = max (min_gc_size, // CAN OVERFLOW (size_t)((float)new_allocation * current_size / ((float)current_size + 2*dd_fragmentation (dd)))); dprintf (2, ("Reducing max_gen allocation due to fragmentation from %Id to %Id", new_allocation, new_allocation1)); new_allocation = new_allocation1; } } else //large object heap { uint32_t memory_load = 0; uint64_t available_physical = 0; get_memory_info (&memory_load, &available_physical); if (heap_number == 0) settings.exit_memory_load = memory_load; if (available_physical > 1024*1024) available_physical -= 1024*1024; uint64_t available_free = available_physical + (uint64_t)generation_free_list_space (generation_of (gen_number)); if (available_free > (uint64_t)MAX_PTR) { available_free = (uint64_t)MAX_PTR; } //try to avoid OOM during large object allocation new_allocation = max (min(max((new_size - current_size), dd_desired_allocation (dynamic_data_of (max_generation))), (size_t)available_free), max ((current_size/4), min_gc_size)); new_allocation = linear_allocation_model (allocation_fraction, new_allocation, dd_desired_allocation (dd), dd_collection_count (dd)); } } else { size_t survivors = out; cst = float (survivors) / float (dd_begin_data_size (dd)); f = surv_to_growth (cst, limit, max_limit); new_allocation = (size_t) min (max ((f * (survivors)), min_gc_size), max_size); new_allocation = linear_allocation_model (allocation_fraction, new_allocation, dd_desired_allocation (dd), dd_collection_count (dd)); if (gen_number == 0) { if (pass == 0) { //printf ("%f, %Id\n", cst, new_allocation); size_t free_space = generation_free_list_space (generation_of (gen_number)); // DTREVIEW - is min_gc_size really a good choice? // on 64-bit this will almost always be true. dprintf (GTC_LOG, ("frag: %Id, min: %Id", free_space, min_gc_size)); if (free_space > min_gc_size) { settings.gen0_reduction_count = 2; } else { if (settings.gen0_reduction_count > 0) settings.gen0_reduction_count--; } } if (settings.gen0_reduction_count > 0) { dprintf (2, ("Reducing new allocation based on fragmentation")); new_allocation = min (new_allocation, max (min_gc_size, (max_size/3))); } } } size_t new_allocation_ret = Align (new_allocation, get_alignment_constant (!(gen_number == (max_generation+1)))); int gen_data_index = gen_number; gc_generation_data* gen_data = &(current_gc_data_per_heap->gen_data[gen_data_index]); gen_data->new_allocation = new_allocation_ret; dd_surv (dd) = cst; #ifdef SIMPLE_DPRINTF dprintf (1, ("h%d g%d surv: %Id current: %Id alloc: %Id (%d%%) f: %d%% new-size: %Id new-alloc: %Id", heap_number, gen_number, out, current_size, (dd_desired_allocation (dd) - dd_gc_new_allocation (dd)), (int)(cst*100), (int)(f*100), current_size + new_allocation, new_allocation)); #else dprintf (1,("gen: %d in: %Id out: %Id ", gen_number, generation_allocation_size (generation_of (gen_number)), out)); dprintf (1,("current: %Id alloc: %Id ", current_size, (dd_desired_allocation (dd) - dd_gc_new_allocation (dd)))); dprintf (1,(" surv: %d%% f: %d%% new-size: %Id new-alloc: %Id", (int)(cst*100), (int)(f*100), current_size + new_allocation, new_allocation)); #endif //SIMPLE_DPRINTF return new_allocation_ret; } }
标签：clr try 赋值 else base 动态 使用 def alignment
原文地址：https://www.cnblogs.com/tangyanzhi1111/p/13197019.html
