标签:schema 接口 操作系统 启动 grep data ddr 配置恢复 负载
环境说明:
服务器的操作系统均为centos7,vip和rip在同一网段,使用lvs-dr模型来实现mysql集群服务
所有服务器均已配置好处VIP外的静态IP
两台mysql服务器的主机名分别是node1和node2,且已安装并启动好mysql
#配置VIP
[root@DR ~]# ip addr add 192.168.32.250/32 dev eth0
#开启IP转发
[root@DR ~]# sysctl -p
net.ipv4.ip_forward = 1
#配置ipvs转发规则
[root@DR ~]# yum -y install ipvsadm
#rr算法并不适合实际场景,这里仅作为测试
[root@DR ~]# ipvsadm -A -t 192.168.32.250:3306 -s rr
[root@DR ~]# ipvsadm -a -t 192.168.32.250:3306 -r 192.168.32.130:3306 -g
[root@DR ~]# ipvsadm -a -t 192.168.32.250:3306 -r 192.168.32.135:3306 -g
[root@DR ~]# ipvsadm -Sn
-A -t 192.168.32.250:3306 -s rr
-a -t 192.168.32.250:3306 -r 192.168.32.130:3306 -g -w 1
-a -t 192.168.32.250:3306 -r 192.168.32.135:3306 -g -w 1
#保存配置
[root@DR ~]# ipvsadm -Sn > /etc/sysconfig/ipvsadm
#如果误删,可以用保存的配置恢复
[root@DR ~]# ipvsadm -C
[root@DR ~]# ipvsadm -R < /etc/sysconfig/ipvsadm
[root@DR ~]# ipvsadm -Sn
-A -t 192.168.32.250:3306 -s rr
-a -t 192.168.32.250:3306 -r 192.168.32.130:3306 -g -w 1
-a -t 192.168.32.250:3306 -r 192.168.32.135:3306 -g -w 1
所有RS上都要做
[root@node1 ~]# vim /etc/sysctl.conf
#添加以下两行
net.ipv4.conf.all.arp_ignore = 1
# 将对应网卡设置为只回应目标IP为自身接口地址的ARP请求
net.ipv4.conf.all.arp_announce = 2
# 将ARP请求的源IP设置为eth0上的IP,也就是RIP
[root@node1 ~]# sysctl -p
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2
[root@node1 ~]# ip addr add 192.168.32.250/32 dev lo
[root@node1 ~]# route add -host 192.168.32.250/32 dev lo
两台数据库服务器上授权,并创建不同名字的数据库用于区分
#node1上登录MySQL
MariaDB [(none)]> grant all on *.* to ‘root‘@‘192.168.%.%‘ identified by ‘123456‘;
Query OK, 0 rows affected (0.00 sec)
MariaDB [(none)]> flush privileges;
Query OK, 0 rows affected (0.00 sec)
MariaDB [(none)]> create database node1;
Query OK, 1 row affected (0.00 sec)
#node2上登录MySQL
MariaDB [(none)]> grant all on *.* to ‘root‘@‘192.168.%.%‘ identified by ‘123456‘;
Query OK, 0 rows affected (0.00 sec)
MariaDB [(none)]> flush privileges;
Query OK, 0 rows affected (0.00 sec)
MariaDB [(none)]> create database node2;
Query OK, 1 row affected (0.00 sec)
[root@localhost ~]# mysql -uroot -p123456 -h192.168.32.250 -e ‘show databases;‘
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| node1 |
| performance_schema |
| test |
+--------------------+
[root@localhost ~]# mysql -uroot -p123456 -h192.168.32.250 -e ‘show databases;‘
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| node2 |
| performance_schema |
| test |
+--------------------+
[root@localhost ~]# mysql -uroot -p123456 -h192.168.32.250 -e ‘show databases;‘
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| node1 |
| performance_schema |
| test |
+--------------------+
[root@localhost ~]# mysql -uroot -p123456 -h192.168.32.250 -e ‘show databases;‘
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| node2 |
| performance_schema |
| test |
+--------------------+
[root@localhost ~]# for i in `seq 10`;do mysql -uroot -p123456 -h192.168.32.250 -e ‘show databases;‘| grep node ; done
node2
node1
node2
node1
node2
node1
node2
node1
node2
node1
标签:schema 接口 操作系统 启动 grep data ddr 配置恢复 负载
原文地址:https://www.cnblogs.com/shipment/p/13381078.html