码迷，mamicode.com
首页 > 数据库 > 详细

Mongodb4.4.1分片集群搭建

时间：2020-12-08 12:21:00      阅读：8      评论：0      收藏：0      [点我收藏+]

标签：修改权限   code   上启   process   text   不同的   linux   root   cache   

1、环境规划

3台机，每台机5个实例，分别mongos 1 个，config server 1 个，shard server 3 个
IP:192.168.56.107(mongodb01) 实例:mongos:30000 shard1:40001(主节点) shard2:40002(仲裁节点) shard3:40003(副节点) config:27027
IP:192.168.56.105(mongodb02) 实例:mongos:30000 shard1:40001(副节点) shard2:40002(主节点) shard3:40003(仲裁节点) config:27028
IP:192.168.56.106(mongodb03) 实例:mongos:30000 shard1:40001(仲裁节点) shard2:40002(副节点) shard3:40003(主节点) config:27029

2、创建相应目录

在192.168.56.107(mongodb01)上新建：

mkdir -p /mongodb01/{data,logs,apps,run} 
mkdir -p /mongodb01/data/shard{1,2,3} 
mkdir -p /mongodb01/data/config

在192.168.56.105(mongodb02)上新建：

mkdir -p /mongodb02/{data,logs,apps,run} 
mkdir -p /mongodb02/data/shard{1,2,3} 
mkdir -p /mongodb02/data/config

在192.168.56.106(mongodb03)上新建：

mkdir -p /mongodb03/{data,logs,apps,run} 
mkdir -p /mongodb03/data/shard{1,2,3} 
mkdir -p /mongodb03/data/config

3、配置环境变量

使用root账号修改配置,/mongodb01/apps/bin 用于存放mongodb的执行程序

echo ‘export PATH=$PATH:/mongodb01/apps/bin‘ >> /etc/profile
source /etc/profile

使用root账号修改配置,/mongodb01/apps/bin 用于存放mongodb的执行程序

echo ‘export PATH=$PATH:/mongodb02/apps/bin‘ >> /etc/profile
source /etc/profile

使用root账号修改配置,/mongodb01/apps/bin 用于存放mongodb的执行程序

echo ‘export PATH=$PATH:/mongodb03/apps/bin‘ >> /etc/profile
source /etc/profile

4、创建用户及修改权限

Mongodb01下：

groupadd -g 10001 mongodb 
useradd -u 10001 -g mongodb mongodb 
id mongodb 
passwd mongodb 
输入新的密码：123 
chown -R mongodb:mongodb /mongodb01
chmod -R 775 /mongodb01

Mongodb02下：

groupadd -g 10001 mongodb 
useradd -u 10001 -g mongodb mongodb 
id mongodb 
passwd mongodb 
输入新的密码：123 
chown -R mongodb:mongodb /mongodb02
chmod -R 775 /mongodb02

Mongodb03下：

groupadd -g 10001 mongodb 
useradd -u 10001 -g mongodb mongodb 
id mongodb 
passwd mongodb 
输入新的密码：123 
chown -R mongodb:mongodb /mongodb03
chmod -R 775 /mongodb03

5、下载安装文件

切换用户：

su mongodb

Mongodb01下:切换目录:

cd /mongodb01/apps

下载文件

wget https://fastdl.mongodb.org/linux/mongodb-linux-x86_64-rhel70-4.4.1.tgz

解压文件

tar -xf mongodb-linux-x86_64-rhel70-4.4.1.tgz
mv mongodb-linux-x86_64-rhel70-4.4.1/bin ./
rm -rf mongodb-linux-x86_64-rhel70-4.4.1

Mongodb02下:切换目录:

cd /mongodb02/apps

下载文件

wget https://fastdl.mongodb.org/linux/mongodb-linux-x86_64-rhel70-4.4.1.tgz

解压文件

tar -xf mongodb-linux-x86_64-rhel70-4.4.1.tgz
mv mongodb-linux-x86_64-rhel70-4.4.1/bin ./
rm -rf mongodb-linux-x86_64-rhel70-4.4.1

Mongodb03下:切换目录:

cd /mongodb03/apps

下载文件

wget https://fastdl.mongodb.org/linux/mongodb-linux-x86_64-rhel70-4.4.1.tgz

解压文件

tar -xf mongodb-linux-x86_64-rhel70-4.4.1.tgz
mv mongodb-linux-x86_64-rhel70-4.4.1/bin ./
rm -rf mongodb-linux-x86_64-rhel70-4.4.1

6、创建配置文件

Mongodb01下新建文件目录：

mkdir -p /mongodb01/apps/conf/
vi /mongodb01/apps/conf/mongodb01-config.yml
echo "systemLog:
  destination: file

# 注意修改路径

  path: "/mongodb01/logs/mongodb01-config.log" 
  logAppend: true
storage:
  journal:
    enabled: true

#注意修改路径

  dbPath: "/mongodb01/data/config"
  engine: wiredTiger
  wiredTiger:
    engineConfig:
         cacheSizeGB: 12
processManagement:
  fork: true
  pidFilePath: "/mongodb01/run/mongodb01-config.pid"
net:
  bindIp: 0.0.0.0

### 注意修改端口

  port: 27027
setParameter:
  enableLocalhostAuthBypass: true
replication:

# 复制集名称

  replSetName: "mgconfig" 
sharding:

#作为配置服务

    clusterRole: configsvr " >>/mongodb01/apps/conf/mongodb01-config.yml

Mongodb02下新建文件目录：

>mkdir -p /mongodb02/apps/conf/
vi /mongodb02/apps/conf/mongodb02-config.yml
echo "systemLog:
  destination: file

#注意修改路径

  path: "/mongodb02/logs/mongodb02-config.log" 
  logAppend: true
storage:
  journal:
    enabled: true

#注意修改路径

  dbPath: "/mongodb02/data/config"
  engine: wiredTiger
  wiredTiger:
    engineConfig:
         cacheSizeGB: 12
processManagement:
  fork: true
  pidFilePath: "/mongodb02/run/mongodb02-config.pid"
net:
  bindIp: 0.0.0.0

#注意修改端口

  port: 27028
setParameter:
  enableLocalhostAuthBypass: true
replication:

#复制集名称

  replSetName: "mgconfig" 
sharding:

#作为配置服务

  clusterRole: configsvr " >>/mongodb02/apps/conf/mongodb02-config.yml

#Mongodb03下新建文件目录：

mkdir -p /mongodb03/apps/conf/
vi /mongodb03/apps/conf/mongodb03-config.yml
echo "systemLog:
  destination: file

#注意修改路径

  path: "/mongodb03/logs/mongodb03-config.log" 
  logAppend: true
storage:
  journal:
    enabled: true

#注意修改路径

  dbPath: "/mongodb03/data/config"
  engine: wiredTiger
  wiredTiger:
    engineConfig:
         cacheSizeGB: 12
processManagement:
  fork: true
  pidFilePath: "/mongodb03/run/mongodb03-config.pid"
net:
  bindIp: 0.0.0.0

#注意修改端口

  port: 27029
setParameter:
  enableLocalhostAuthBypass: true
replication:

#复制集名称

  replSetName: "mgconfig" 
sharding:

#作为配置服务

  clusterRole: configsvr " >>/mongodb03/apps/conf/mongodb03-config.yml

在mongodb01下

vi /mongodb01/apps/conf/mongodb01-shard1.yml
echo "systemLog:
  destination: file
  path: "/mongodb01/logs/mongodb01-shard1.log"
  logAppend: true
storage:
  journal:
    enabled: true
  dbPath: "/mongodb01/data/shard1"
processManagement:
  fork: true
  pidFilePath: "/mongodb01/run/mongodb01-shard1.pid"
net:
  bindIp: 0.0.0.0

#注意修改端口

  port: 40001
setParameter:
  enableLocalhostAuthBypass: true
replication:

  #复制集名称

  replSetName: "shard1" 
sharding:

  #作为分片服务

  clusterRole: shardsvr" >>/mongodb01/apps/conf/mongodb01-shard1.yml

-----

vi /mongodb01/apps/conf/mongodb01-shard2.yml
echo "systemLog:
  destination: file
  path: "/mongodb01/logs/mongodb01-shard2.log"
  logAppend: true
storage:
  journal:
    enabled: true
  dbPath: "/mongodb01/data/shard2"
processManagement:
  fork: true
  pidFilePath: "/mongodb01/run/mongodb01-shard2.pid"
net:
  bindIp: 0.0.0.0

  #注意修改端口

  port: 40002
setParameter:
  enableLocalhostAuthBypass: true
replication:

  #复制集名称

  replSetName: "shard2" 
sharding:

  #作为分片服务

  clusterRole: shardsvr" >>/mongodb01/apps/conf/mongodb01-shard2.yml

-----

vi /mongodb01/apps/conf/mongodb01-shard3.yml
echo "systemLog:
  destination: file
  path: "/mongodb01/logs/mongodb01-shard3.log"
  logAppend: true
storage:
  journal:
    enabled: true
  dbPath: "/mongodb01/data/shard3"
processManagement:
  fork: true
  pidFilePath: "/mongodb01/run/mongodb01-shard3.pid"
net:
  bindIp: 0.0.0.0

  #注意修改端口

  port: 40003
setParameter:
  enableLocalhostAuthBypass: true
replication:

  #复制集名称

  replSetName: "shard3" 
sharding:

  #作为分片服务

  clusterRole: shardsvr" >>/mongodb01/apps/conf/mongodb01-shard3.yml

-----

vi /mongodb01/apps/conf/mongodb01-route.yml
echo "systemLog:
  destination: file

  #注意修改路径

  path: "/mongodb01/logs/mongodb01-route.log" 
  logAppend: true
processManagement:
  fork: true
  pidFilePath: "/mongodb01/run/mongodb01-route.pid"
net:
  bindIp: 0.0.0.0

  #注意修改端口

  port: 30000
setParameter:
  enableLocalhostAuthBypass: true
replication:
  localPingThresholdMs: 15
sharding:

  #关联配置服务

  configDB: mgconfig/192.168.56.107:27027,192.168.56.105:27028,192.168.56.106:27029 " >>/mongodb01/apps/conf/mongodb01-route.yml

技术图片

在mongodb02下

vi /mongodb02/apps/conf/mongodb02-shard1.yml
echo "systemLog:
  destination: file
  path: "/mongodb02/logs/mongodb02-shard1.log"
  logAppend: true
storage:
  journal:
    enabled: true
  dbPath: "/mongodb02/data/shard1"
processManagement:
  fork: true
  pidFilePath: "/mongodb02/run/mongodb02-shard1.pid"
net:
  bindIp: 0.0.0.0
  #注意修改端口
  port: 40001
setParameter:
  enableLocalhostAuthBypass: true
replication:
  #复制集名称
  replSetName: "shard1" 
sharding:
  #作为分片服务
  clusterRole: shardsvr" >>/mongodb02/apps/conf/mongodb02-shard1.yml

-----

vi /mongodb02/apps/conf/mongodb02-shard2.yml
echo "systemLog:
  destination: file
  path: "/mongodb02/logs/mongodb02-shard2.log"
  logAppend: true
storage:
  journal:
    enabled: true
  dbPath: "/mongodb02/data/shard2"
processManagement:
  fork: true
  pidFilePath: "/mongodb02/run/mongodb02-shard2.pid"
net:
  bindIp: 0.0.0.0
  #注意修改端口
  port: 40002
setParameter:
  enableLocalhostAuthBypass: true
replication:
  #复制集名称
  replSetName: "shard2" 
sharding:
  #作为分片服务
  clusterRole: shardsvr" >>/mongodb02/apps/conf/mongodb02-shard2.yml

----

vi /mongodb02/apps/conf/mongodb02-shard3.yml
echo "systemLog:
  destination: file
  path: "/mongodb02/logs/mongodb02-shard3.log"
  logAppend: true
storage:
  journal:
    enabled: true
  dbPath: "/mongodb02/data/shard3"
processManagement:
  fork: true
  pidFilePath: "/mongodb02/run/mongodb02-shard3.pid"
net:
  bindIp: 0.0.0.0
  #注意修改端口
  port: 40003
setParameter:
  enableLocalhostAuthBypass: true
replication:
  #复制集名称
  replSetName: "shard3" 
sharding:
  #作为分片服务
  clusterRole: shardsvr" >>/mongodb02/apps/conf/mongodb02-shard3.yml

-----

vi /mongodb02/apps/conf/mongodb02-route.yml
echo "systemLog:
  destination: file
  #注意修改路径
  path: "/mongodb02/logs/mongodb02-route.log" 
  logAppend: true
processManagement:
  fork: true
  pidFilePath: "/mongodb02/run/mongodb02-route.pid"
net:
  bindIp: 0.0.0.0
  #注意修改端口
  port: 30000
setParameter:
  enableLocalhostAuthBypass: true
replication:
  localPingThresholdMs: 15
sharding:
  #关联配置服务
  configDB: mgconfig/192.168.56.107:27027,192.168.56.105:27028,192.168.56.106:27029 " >>/mongodb02/apps/conf/mongodb02-route.yml

技术图片

在mongodb03下

    vi /mongodb03/apps/conf/mongodb03-shard1.yml
echo "systemLog:
  destination: file
  path: "/mongodb03/logs/mongodb03-shard1.log"
  logAppend: true
storage:
  journal:
    enabled: true
  dbPath: "/mongodb03/data/shard1"
processManagement:
  fork: true
  pidFilePath: "/mongodb03/run/mongodb03-shard1.pid"
net:
  bindIp: 0.0.0.0
  #注意修改端口
  port: 40001
setParameter:
  enableLocalhostAuthBypass: true
replication:
  #复制集名称
  replSetName: "shard1" 
sharding:
  #作为分片服务
  clusterRole: shardsvr" >>/mongodb03/apps/conf/mongodb03-shard1.yml

-----

vi /mongodb03/apps/conf/mongodb03-shard2.yml
echo "systemLog:
  destination: file
  path: "/mongodb03/logs/mongodb03-shard2.log"
  logAppend: true
storage:
  journal:
    enabled: true
  dbPath: "/mongodb03/data/shard2"
processManagement:
  fork: true
  pidFilePath: "/mongodb03/run/mongodb03-shard2.pid"
net:
  bindIp: 0.0.0.0
  #注意修改端口
  port: 40002
setParameter:
  enableLocalhostAuthBypass: true
replication:
  #复制集名称
  replSetName: "shard2" 
sharding:
  #作为分片服务
  clusterRole: shardsvr" >>/mongodb03/apps/conf/mongodb03-shard2.yml

-----

    vi /mongodb03/apps/conf/mongodb03-shard3.yml
echo "systemLog:
  destination: file
  path: "/mongodb03/logs/mongodb03-shard3.log"
  logAppend: true
storage:
  journal:
    enabled: true
  dbPath: "/mongodb03/data/shard3"
processManagement:
  fork: true
  pidFilePath: "/mongodb03/run/mongodb03-shard3.pid"
net:
  bindIp: 0.0.0.0
  #注意修改端口
  port: 40003
setParameter:
  enableLocalhostAuthBypass: true
replication:
  #复制集名称
  replSetName: "shard3" 
sharding:
  #作为分片服务
  clusterRole: shardsvr" >>/mongodb03/apps/conf/mongodb03-shard3.yml

-----

vi /mongodb03/apps/conf/mongodb03-route.yml
echo "systemLog:
  destination: file
  #注意修改路径
  path: "/mongodb03/logs/mongodb03-route.log" 
  logAppend: true
processManagement:
  fork: true
  pidFilePath: "/mongodb03/run/mongodb03-route.pid"
net:
  bindIp: 0.0.0.0
  #注意修改端口
  port: 30000
setParameter:
  enableLocalhostAuthBypass: true
replication:
  localPingThresholdMs: 15
sharding:
  #关联配置服务
  configDB: mgconfig/192.168.56.107:27027,192.168.56.105:27028,192.168.56.106:27029 " >>/mongodb03/apps/conf/mongodb03-route.yml

技术图片

7、部署配置服务器集群(三台机器都要操作)

启动config服务（3台机器执行相同操作,只是在不同的mongodb上启动时需要修改mongodb0,此处只演示mongodb01上的配置部署）
在mongodb01下

cd /mongodb01/apps/conf/
mongod --config /mongodb01/apps/conf/mongodb01-config.yml

连接一个实例

mongo 192.168.56.107:27027(此处三台机器一致)

初始化复制集
(这个 mgconfig 名字一定要和config 配置文件中 replSet 的名字一致)
```config={id:"mgconfig",members:[{id:0,host:"192.168.56.107:27027"},{id:1,host:"192.168.56.105:27028"},{id:2,host:"192.168.56.106:27029"},]}

rs.initiate(config)

检查状态

rs.status()


复制集配完后，可能状态不会马上改变（可能都是secondary），过几秒就会自动更新
![](https://s4.51cto.com/images/blog/202012/03/802a176d4595cb00dd85150780c9aa05.png?x-oss-process=image/watermark,size_16,text_QDUxQ1RP5Y2a5a6i,color_FFFFFF,t_100,g_se,x_10,y_10,shadow_90,type_ZmFuZ3poZW5naGVpdGk=)

8、部署shard1分片集群(3台机器都要操作，此处只操作mongodb01)

启动3台shard1实例

cd /mongodb01/apps/conf/
mongod --config /mongodb01/apps/conf/mongodb01-shard1.yml

连接一个实例

mongo 192.168.56.107:40001(3台机器一致)

创建复制集

use admin
config={_id:"shard1",members:[{_id:0,host:"192.168.56.107:40001",priority:2},{_id:1,host:"192.168.56.105:40001",priority:1},{_id:2,host:"192.168.56.106:40001",arbiterOnly:true},]}

这个 shard1名字一定要和 shard1配置文件中 replSet 的名字一致
初始化复制集

rs.initiate(config)

检查状态

rs.status()

复制集配完后，可能状态不会马上改变（可能都是secondary），过几秒就会自动更新
技术图片

9、部署shard2分片集群(3台机器都要操作，此处只示范mongodb01)

启动3台shard2实例

cd /mongodb01/apps/conf/
mongod --config /mongodb01/apps/conf/mongodb01-shard2.yml

连接第二个节点创建复制集
为什么是连接第二个，因为规划的shard2 的主节点是105:40002，仲裁节点不能写数据，所以这里不能连107，要连105

mongo 192.168.56.105:40002(三台机器一致)

创建复制集

use admin
config={_id:"shard2",members:[{_id:0,host:"192.168.56.107:40002",arbiterOnly:true},{_id:1,host:"192.168.56.105:40002",priority:2}, {_id:2,host:"192.168.56.106:40002",priority:1},]}

这个 shard2名字一定要和 shard2配置文件中 replSet 的名字一致
初始化复制集

rs.initiate(config)

检查状态

rs.status()

复制集配完后，可能状态不会马上改变（可能都是secondary），过几秒就会自动更新
技术图片

10、部署shard3分片集群(3台机器都要操作，这里只示范mongodb01)

启动3台shard3实例

cd /mongodb01/apps/conf/
mongod --config /mongodb01/apps/conf/mongodb01-shard3.yml

连接第三个节点创建复制集
为什么是连接第三个，因为规划的shard3 的主节点是106:40003

mongo 192.168.56.106:40003(3台机器一致)

创建复制集

use admin
config={_id:"shard3",members:[{_id:0,host:"192.168.56.107:40003",priority:1},{_id:1,host:"192.168.56.105:40003",arbiterOnly:true}, 
{_id:2,host:"192.168.56.106:40003",priority:2},]}

这个 shard3名字一定要和 shard3配置文件中 replSet 的名字一致
初始化复制集

rs.initiate(config)

检查状态

rs.status()

复制集配完后，可能状态不会马上改变（可能都是secondary），过几秒就会自动更新
技术图片

11、启用分片功能

登陆路由节点

cd /mongodb01/apps/conf/
mongos --config /mongodb01/apps/conf/mongodb01-route.yml
mongo 192.168.56.107:30000

use admin
sh.addShard("shard1/192.168.56.107:40001,192.168.56.105:40001,192.168.56.106:40001") 
sh.addShard("shard2/192.168.56.107:40002,192.168.56.105:40002,192.168.56.106:40002") 
sh.addShard("shard3/192.168.56.107:40003,192.168.56.105:40003,192.168.56.106:40003")

检查状态

sh.status()

技术图片

12、服务脚本

编写服务脚本，便于启动和停止集群

#!/bin/bash
#mongodb script takes care of starting ||stopping ||reload mongom
#chkconfig:- 80 15
#description: Mongo database
#precessname: mongom
user=mongodb
#source function library
#source /etc/init.d/functions
#/mongodb/apps/mongodb/bin
#the localcation of configfile
config_configfile="/mongodb01/apps/conf/mongodb01-config.yml"
router_configfile="/mongodb01/apps/conf/mongodb01-route.yml"
shard1_configfile="/mongodb01/apps/conf/mongodb01-shard1.yml"
shard2_configfile="/mongodb01/apps/conf/mongodb01-shard2.yml"
shard3_configfile="/mongodb01/apps/conf/mongodb01-shard3.yml"

#the options of start a mongodb server
start_config_options=" --config $config_configfile"
stop_config_options=" --shutdown --dbpath /mongodb01/data/config"
start_router_options=" --config $router_configfile"
start_shard1_options=" --config $shard1_configfile"
stop_shard1_options=" --shutdown --dbpath /mongodb01/data/shard1"
start_shard2_options=" --config $shard2_configfile"
stop_shard2_options=" --shutdown --dbpath /mongodb01/data/shard2"         
start_shard3_options=" --config $shard3_configfile"
stop_shard3_options=" --shutdown --dbpath /mongodb01/data/shard3"

#the localcation of mongod
mongod="/mongodb01/apps/bin/mongod"

#the localcation of mongos
mongos="/mongodb01/apps/bin/mongos"

#where to lockfile
config_lockfile="/mongodb01/data/config/mongod.lock"
shard1_lockfile="/mongodb01/data/shard1/mongod.lock"
shard2_lockfile="/mongodb01/data/shard2/mongod.lock"
shard3_lockfile="/mongodb01/data/shard3/mongod.lock"
#where to pidfile
config_pidfile="/mongodb01/run/mongodb01-config.pid"
router_pidfile="/mongodb01/run/mongodb01-route.pid"
shard1_pidfile="/mongodb01/run/mongodb01-shard1.pid"
shard2_pidfile="/mongodb01/run/mongodb01-shard2.pid"
shard3_pidfile="/mongodb01/run/mongodb01-shard3.pid"

#function of start config server
function start-config(){
    #print the tips
    echo -n $"Starting mongod of config_server:"
    $mongod $start_config_options
    #get the result
    RETVAL=$?
    if [ $RETVAL -eq 0 ];then
        touch $config_lockfile
    fi}

#function of stop config server
function stop-config(){
    #print the tips
    echo  $"stopping mongod of config_server:"
    $mongod $stop_config_options
    RETVAL=$?
    if [ $RETVAL -eq 0 ];then
        rm -f $config_lockfile
        rm -f $config_pidfile
    fi}

#function of start router server
function start-router(){
    #print the tips
    echo  $"Starting mongod of router_server:"
    $mongos $start_router_options
}
#function of stop router server
function stop-router(){
    #print the tips
    echo  $"stopping mongod of router_server:"
    kill `cat $router_pidfile`
    RETVAL=$?
    if [ $RETVAL -eq 0 ];then
        rm -f $router_pidfile
    fi

}

#function of start shard1
function start-shard1(){
    #print the tips
    echo  $"Starting mongod of shard1_server:"
    $mongod $start_shard1_options
    #get the result
    RETVAL=$?
    if [ $RETVAL -eq 0 ];then
        touch $shard1_lockfile
    fi
}

#function of stop shard1
function stop-shard1(){
    #print the tips
    echo  $"stopping mongod of shard1_server:"
    $mongod $stop_shard1_options
    RETVAL=$?
    if [ $RETVAL -eq 0 ];then
        rm -f $shard1_lockfile
        rm -f $shard1_pidfile
    fi
}
#function of start shard2
function start-shard2(){
    #print the tips
    echo -n $"Starting mongod of shard2_server:"
    $mongod $start_shard2_options
    #get the result
    RETVAL=$?
    if [ $RETVAL -eq 0 ];then
        touch $shard2_lockfile
    fi
}
#function of stop shard2
function stop-shard2(){
    #print the tips
    echo  $"stopping mongod of shard2_server:"
    $mongod $stop_shard2_options
    RETVAL=$?
    if [ $RETVAL -eq 0 ];then
        rm -f $shard2_lockfile
        rm -f $shard2_pidfile
    fi
}
#function of start shard3
function start-shard3(){
    #print the tips
    echo -n $"Starting mongod of shard3_server:"
    $mongod $start_shard3_options
    #get the result
    RETVAL=$?
    if [ $RETVAL -eq 0 ];then
        touch $shard3_lockfile
    fi}
#function of stop shard3
function stop-shard3(){
    #print the tips
    echo  $"stopping mongod of shard3_server:"
    $mongod $stop_shard3_options
    RETVAL=$?
    if [ $RETVAL -eq 0 ];then
        rm -f $shard3_lockfile
        rm -f $shard3_pidfile
    fi
}
start(){
    start-config
    echo ‘‘
    start-shard1
    echo ‘‘
    start-shard2
    echo ‘‘
    start-shard3
    echo ‘‘
    start-router
}
stop(){
    stop-shard1
    echo ‘stop-shard1 ok‘
    stop-shard2
    echo ‘stop-shard2 ok‘
    stop-shard3
    echo ‘stop-shard3 ok‘
    stop-router
    echo ‘stop-router ok‘
    stop-config
    echo ‘stop-config ok‘
}
RETVAL=0
case "$1" in
    start)
    start
      ;;
    stop)
    stop
      ;;
    start-all)
    start
      ;;
    stop-all)
    stop
      ;;
    start-shard3)
    start-shard3
      ;;
    stop-shard3)
    stop-shard3
      ;;
    start-shard2)
    start-shard2
      ;;
    stop-shard2)
    stop-shard2
      ;;
    start-shard1)
    start-shard1
      ;;
    stop-shard1)
    stop-shard1
      ;;
    start-config)
    start-config
      ;;
    stop-config)
    stop-config
      ;;
    start-router)
    start-router
      ;;
    restart-config |reload-config |force-reload-config)
    stop-config
    start-config
      ;;
    restart-router |reload-router |force-reload-router)
    stop-router
    start-router
      ;;
    restart-shard1 |reload-shard1 |force-reload-shard1)
    stop-shard1
    start-shard1
      ;;
    restart-shard2 |reload-shard2 |force-reload-shard2)
    stop-shard2
    start-shard2
      ;;
    restart-shard3 |reload-shard3 |force-reload-shard3)
    stop-shard3
    start-shard3
      ;;
    restart-all |reload-all |force-reload-all)
    stop
    start
      ;;
    conderstart)
      [ -f $lockfile ] && restart || :
      [ -f $lockfile ] && restart || :
      ;;
    status)
      status $mongod
      RETVAL=$?
       ;;
    *)
    echo "Usage: $0 {start-*|stop-*|restart-*|status|reload-*|force-reload-*|condrestart(* in {all,config,router,shard1,shard2,shard3})}"
esac
exit $RETVAL

13、测试服务器分片功能

模拟写入数据
在tydb库的tyuser表中循环写入6万条数据

mongo 192.168.56.107:30000
use tydb
show collections
for(i=1;i<=60000;i++){db.tyuser.insert({"id":i,"name":"ty"+i})}

启用数据库分片

sh.enableSharding("tydb")

创建的索引

db.tyuser.createIndex({"id":1})

启用表分片

sh.shardCollection(”tydb.tyuser",{"id":1})

查看分片情况

sh.status()

开启平衡器

use admin
sh.startBalance()

关闭平衡器

use admin
sh.stopBalancer()

查看是否关闭
返回flase表示平衡器已关闭，还需要查询均衡器正在运行的 情况

sh.getBalancerState()

Mongodb4.4.1分片集群搭建

标签：修改权限   code   上启   process   text   不同的   linux   root   cache   

原文地址：https://blog.51cto.com/14998880/2559091
踩
(0)
赞
(0)
   
举报
评论 一句话评论（0）
登录后才能评论！
分享档案
更多>
2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)
周排行
mamicode.com排行更多图片
更多
友情链接
兰亭集智   国之画   百度统计   站长统计   阿里云   chrome插件   新版天听网
关于我们 - 联系我们 - 留言反馈
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码！