码迷,mamicode.com
首页 > Web开发 > 详细

CPU 问题 —— 数据收集(官网)-- Debug high CPU usage in .NET Core

时间:2021-01-15 11:42:28      阅读:0      评论:0      收藏:0      [点我收藏+]

标签:sites   hover   complete   sage   timers   processes   pool   with   cti   

Debug high CPU usage in .NET Core

 

In this tutorial, you‘ll learn how to debug an excessive CPU usage scenario. Using the provided example ASP.NET Core web app source code repository, you can cause a deadlock intentionally. The endpoint will experience a hang and thread accumulation. You‘ll learn how you can use various tools to diagnose this scenario with several key pieces of diagnostics data.

In this tutorial, you will:

  • Investigate high CPU usage
  • Determine CPU usage with dotnet-counters
  • Use dotnet-trace for trace generation
  • Profile performance in PerfView
  • Diagnose and solve excessive CPU usage

Prerequisites

The tutorial uses:

CPU counters

Before attempting to collect diagnostics data, you need to observe a high CPU condition. Run the sample application using the following command from the project root directory.

.NET Core CLI
dotnet run

To find the process ID, use the following command:

.NET Core CLI
dotnet-trace ps

Take note of the process ID from your command output. Our process ID was 22884, but yours will be different. To check the current CPU usage, use the dotnet-counters tool command:

.NET Core CLI
dotnet-counters monitor --refresh-interval 1 -p 22884

The refresh-interval is the number of seconds between the counter polling CPU values. The output should be similar to the following:

Console
Press p to pause, r to resume, q to quit.
    Status: Running

[System.Runtime]
    % Time in GC since last GC (%)                         0
    Allocation Rate / 1 sec (B)                            0
    CPU Usage (%)                                          0
    Exception Count / 1 sec                                0
    GC Heap Size (MB)                                      4
    Gen 0 GC Count / 60 sec                                0
    Gen 0 Size (B)                                         0
    Gen 1 GC Count / 60 sec                                0
    Gen 1 Size (B)                                         0
    Gen 2 GC Count / 60 sec                                0
    Gen 2 Size (B)                                         0
    LOH Size (B)                                           0
    Monitor Lock Contention Count / 1 sec                  0
    Number of Active Timers                                1
    Number of Assemblies Loaded                          140
    ThreadPool Completed Work Item Count / 1 sec           3
    ThreadPool Queue Length                                0
    ThreadPool Thread Count                                7
    Working Set (MB)                                      63

With the web app running, immediately after startup, the CPU isn‘t being consumed at all and is reported at 0%. Navigate to the api/diagscenario/highcpu route with 60000 as the route parameter:

https://localhost:5001/api/diagscenario/highcpu/60000

Now, rerun the dotnet-counters command. To monitor just the cpu-usage, specify System.Runtime[cpu-usage] as part of the command.

.NET Core CLI
dotnet-counters monitor --counters System.Runtime[cpu-usage] -p 22884 --refresh-interval 1

You should see an increase in CPU usage as shown below:

Console
Press p to pause, r to resume, q to quit.
    Status: Running

[System.Runtime]
    CPU Usage (%)                                         25

Throughout the duration of the request, the CPU usage will hover around 25% . Depending on the host machine, expect varying CPU usage.

 Tip

To visualize an even higher CPU usage, you can exercise this endpoint in multiple browser tabs simultaneously.

At this point, you can safely say the CPU is running higher than you expect.

Trace generation

When analyzing a slow request, you need a diagnostics tool that can provide insights into what the code is doing. The usual choice is a profiler, and there are different profiler options to choose from.

On Windows, you can use the dotnet-trace tool as a profiler. Using the previous sample debug target, exercise the high CPU endpoint (https://localhost:5001/api/diagscenario/highcpu/60000) again. While it‘s running within the 1-minute request, use the collect command as follows:

.NET Core CLI
dotnet-trace collect -p 22884 --providers Microsoft-DotNETCore-SampleProfiler

Let dotnet-trace run for about 20-30 seconds, and then press the Enter to exit the collection. The result is a nettrace file located in the same folder. The nettrace files are a great way to use existing analysis tools on Windows.

Open the nettrace with PerfView as shown below.

技术图片

CPU 问题 —— 数据收集(官网)-- Debug high CPU usage in .NET Core

标签:sites   hover   complete   sage   timers   processes   pool   with   cti   

原文地址:https://www.cnblogs.com/panpanwelcome/p/14276570.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!