标签：ima word having field write ping condition tracking unlock
The Labelary ZPL rendering engine supports most of the ZPL formatting commands; check below to see which commands are supported and which are still being worked on. If there is a specific unsupported command which you would like us to prioritize, feel free to get in touch with us.
Most of the unsupported commands do not affect label formatting (e.g. printer network configuration commands, printer serial communication commands and printer hardware configuration commands). Unsupported commands do not prevent rendering -- they are merely skipped.
= Supported
= Unsupported
| ^A font, height, width | Set font for current field | |
| ^A@ orientation, height, width, path | Use font name to call font | |
| ^B0 orientation, magnification, eci, size, readerInit, symbols, id | Aztec bar code (alternate command: ^BO) | |
| ^B1 orientation, checkDigit, height, line, lineAbove | Code 11 bar code | |
| ^B2 orientation, height, line, lineAbove, checkDigit | Interleaved 2 of 5 bar code | |
| ^B3 orientation, checkDigit, height, line, lineAbove | Code 39 bar code | |
| ^B4 orientation, heightMultiplier, line, mode | Code 49 bar code | |
| ^B5 orientation, height, line, lineAbove | Planet Code bar code | |
| ^B7 orientation, rowHeight, security, columns, rows, truncate | PDF417 bar code | |
| ^B8 orientation, height, line, lineAbove | EAN-8 bar code | |
| ^B9 orientation, height, line, lineAbove, checkDigit | UPC-E bar code | |
| ^BA orientation, height, line, lineAbove, checkDigit | Code 93 bar code | |
| ^BB orientation, height, security, columns, rows, mode | Codablock bar code | |
| ^BC orientation, height, line, lineAbove, checkDigit, mode | Code 128 bar code | |
| ^BD mode, position, total | UPS MaxiCode bar code | |
| ^BE orientation, height, line, lineAbove | EAN-13 bar code | |
| ^BF orientation, rowHeight, mode | MicroPDF417 bar code | |
| ^BI orientation, height, line, lineAbove | Industrial 2 of 5 bar code | |
| ^BJ orientation, height, line, lineAbove | Standard 2 of 5 bar code | |
| ^BK orientation, checkDigit, height, line, lineAbove, startChar, stopChar | ANSI Codabar bar code | |
| ^BL orientation, height, lineAbove | LOGMARS bar code | |
| ^BM orientation, checkDigitType, height, line, lineAbove, checkDigit | MSI bar code | |
| ^BO orientation, magnification, eci, size, readerInit, symbols, id | Aztec bar code (alternate command: ^B0) | |
| ^BP orientation, checkDigit, height, line, lineAbove | Plessey bar code | |
| ^BQ orientation, model, magnification, errorCorrection, mask | QR code bar code (model 2 only; no mixed mode or Kanji) | |
| ^BR orientation, symbol, magnification, sepHeight, height, segWidth | RSS bar code | |
| ^BS orientation, height, line, lineAbove | UPC/EAN extension | |
| ^BT orientation, width, widthRatio, height, narrowWidth, rowHeight | TLC39 bar code | |
| ^BU orientation, height, line, lineAbove, printCheckDigit | UPC-A bar code | |
| ^BX orientation, height, quality, columns, rows, format, escape | Data matrix bar code (quality 200 only) | |
| ^BY width, widthRatio, height | Bar code field defaults | |
| ^BZ orientation, height, line, lineAbove, type | Postal bar code | |
| ^CC char | Change caret (alternate command: ~CC) | |
| ^CD char | Change delimiter (alternate command: ~CD) | |
| ^CF fontName, height, width | Change default font | |
| ^CI charset, src1, dest1, src2, dest2, ... | Change encoding (charsets 0-13, 15, 27, 28, 31, 33-36 only) | |
| ^CM bAlias, eAlias, rAlias, aAlias, multiple | Change memory letter designation | |
| ^CN override | Cut now | |
| ^CO on, kilobytes, type | Cache on | |
| ^CP mode | Remove label | |
| ^CT char | Change tilde (alternate command: ~CT) | |
| ^CV validation | Code validation | |
| ^CW fontName, path | Set font identifier | |
| ~DB path, orient, height, width, base, space, chars, copyright, data | Download bitmap font | |
| ~DE path, tableSize, data | Download encoding | |
| ^DF path | Download format | |
| ~DG path, totalBytes, rowBytes, data | Download graphics | |
| ~DN | Abort download graphics | |
| ~DS path, size, data | Download scalable font | |
| ~DT path, size, data | Download TrueType font | |
| ~DU path, size, data | Download unbounded TrueType font | |
| ~DY path, format, extension, totalBytes, rowBytes, data | Download objects (extensions G, B, P and T only) | |
| ~EG | Erase all graphics (alternate command: ^EG) | |
| ^FB maxWidth, maxLines, lineSpacing, alignment, hangingIndent | Field block | |
| ^FC indicator1, indicator2, indicator3 | Field clock | |
| ^FD data | Field data | |
| ^FH hexIndicator | Field hexadecimaml indicator | |
| ^FL extensionPath, basePath, link | Font link | |
| ^FM x1, y2, x2, y2, ... | Field multiple origin locations | |
| ^FN fieldNumber | Field number | |
| ^FO x, y, alignment | Field origin | |
| ^FP direction, characterSpacing | Field parameter | |
| ^FR | Field reverse print | |
| ^FS | Field separator (alternate command: 0x0F) | |
| ^FT x, y, alignment | Field typeset | |
| ^FV data | Field variable | |
| ^FW orientation, alignment | Field orientation | |
| ^FX comment | Comment | |
| ^GB width, height, thickness, color, rounding | Graphic box | |
| ^GC diameter, thickness, color | Graphic circle | |
| ^GD width, height, thickness, color, orientation | Graphic diagonal line | |
| ^GE width, height, thickness, color | Graphic ellipse | |
| ^GF format, dataBytes, totalBytes, rowBytes, data | Graphic field | |
| ^GS orientation, height, width | Graphic symbol | |
| ~HB | Battery status | |
| ~HD | Head diagnostic | |
| ^HF path | Host format | |
| ^HG path | Host graphic | |
| ^HH | Configuration label return | |
| ~HI | Host identification | |
| ^HL | Send RFID data log to host (alternate command: ~HL) | |
| ~HM | Host RAM status | |
| ~HQ query | Host query | |
| ^HR prefix, suffix, start, end, antennaSelection | Calibrate RFID tag position | |
| ~HS | Host status return | |
| ^HT | Host linked font list | |
| ~HU | Host alert configuration | |
| ^HV | Host verification | |
| ^HW path | Host directory list | |
| ^HY path | Upload graphics | |
| ^HZ param | Display description information | |
| ^ID path | Delete object | |
| ^IL path | Image load | |
| ^IM path | Image move | |
| ^IS path, print | Image save | |
| ~JA | Cancel all | |
| ^JB device | Initialize flash memory | |
| ~JB | Reset optional memory | |
| ~JC | Set media sensor calibration | |
| ~JD | Enable communications diagnostics | |
| ~JE | Disable communications diagnostics | |
| ~JF pause | Set battery condition | |
| ~JG | Graphing sensor calibration | |
| ^JH settings | Early warning settings | |
| ^JI path, console, echo, memory | Start ZBI (alternate command: ~JI) | |
| ^JJ opMode, appMode, signalMode, errMode, reprintMode, ribbonMode | Set auxiliary port | |
| ~JL | Set label length | |
| ^JM adjustment | Set print density | |
| ~JN | Head test fatal | |
| ~JO | Head test not fatal | |
| ~JP | Pause and cancel format | |
| ~JQ | Stop ZBI | |
| ~JR | Power on reset | |
| ^JS sensor | Sensor select | |
| ~JS sequence | Change backfeed sequence | |
| ^JT labels, manualSelection, first, last | Head test interval | |
| ^JU configuration | Configuration update | |
| ^JW tension | Set ribbon tension | |
| ~JX | Cancel current format | |
| ^JZ reprint | Reprint after error | |
| ~KB | Kill battery | |
| ^KC enable, device, prefix, identifier | Set DHCP client ID | |
| ^KD format | Select date and time format | |
| ^KL language | Select language | |
| ^KN name, description | Set printer name | |
| ^KP password | Set password | |
| ^KV cutAmount, cutMargin, presentType, presentTimeout, loopLen | Kiosk values | |
| ^LF | List font links | |
| ^LH x, y | Label home | |
| ^LL length | Label length | |
| ^LR reverse | Label reverse print | |
| ^LS shift | Label shift | |
| ^LT top | Label top | |
| ^MA type, print, threshold, frequency, units | Maintenance alerts | |
| ^MC clear | Map clear | |
| ^MD darknessModifier | Modify darkness | |
| ^MF powerupAction, closingAction | Media feed | |
| ^MI type, message | Adjust maintenance information message | |
| ^ML maxLength, maxLogicalPaper, maxPhysicalPaper, maxRibbon | Max label length | |
| ^MM mode, prepeel | Print mode | |
| ^MN media, offset | Media tracking | |
| ^MP mode | Mode protection | |
| ^MT mediaType | Media type | |
| ^MU units, baseDpi, desiredDpi | Set units of measurement | |
| ^MW enable | Modify head cold warning | |
| ^NB check | Set network boot print server check | |
| ^NC device | Set primary network device | |
| ~NC networkId | Network connect | |
| ^ND device, res, ip, mask, gateway, wins, timeout, secs, arp, port | Modify network settings | |
| ^NI networkId | Network ID number | |
| ^NN name, contact, location, getCommunity, setCommunity, trapCommunity | Configure SNMP | |
| ^NP device | Set primary device | |
| ~NR | Set all network printers transparent | |
| ^NS setting, ip, subnetMask, gateway | Change network settings | |
| ~NT | Set current printer transparent | |
| ^NT server, domain | Configure SMTP | |
| ^NW timeout | Set password timeout | |
| ^PA defaultGlyph, bidi, charShaping, openTypeSupport | Advanced text properties | |
| ^PF rows | Slew rows | |
| ^PH | Slew to home position (alternate command: ~PH) | |
| ~PL length | Additional present length | |
| ^PM mirror | Print mirror image | |
| ~PM serialNumber, wipeCount | Decommission printer | |
| ^PN length | Present now | |
| ^PO orientation | Print orientation | |
| ^PP | Programmable pause (alternate command: ~PP) | |
| ^PQ labels, labelsBetweenPauses, replicates, noPause, cutOnError | Print quantity | |
| ^PR printSpeed, slewSpeed, backfeedSpeed | Print rate | |
| ~PR | Applicator reprint | |
| ~PS | Print start | |
| ^PW width | Print width | |
| ^RA fieldNumber, format, retries, motion, byteType | Read RFID AFI or DSFID byte | |
| ^RB totalBits, partition1, partition2, ... , partition16 | Configure RFID EPC data structure | |
| ^RE enable, retries | Enable RFID EAS bit | |
| ^RF operation, format, passwordOrBlock, bytes, memoryBank | Read or write RFID data (write operations only) | |
| ^RI fieldNumber, order, retries, motion | Read RFID tag ID | |
| ^RL lockAction, p1, p2, epcOp, userOp | Lock and unlock RFID tag memory | |
| ^RM enable | Configure RFID motion | |
| ^RN enable | Configure RFID multiple tag detection | |
| ~RO counter | Reset counter | |
| ^RQ format, chipType, option | Write RFID EPC data and passwords | |
| ^RR retries, adaptive | Configure RFID retries and adaptive antenna | |
| ^RS type, pos, voidLen, labels, onError, signal, deprecated, voidSpeed | Configure RFID | |
| ^RT fieldNumber, startBlock, blocks, format, retries, motion, mode | Read RFID tag | |
| ^RU prefix, escapeChar | Read RFID tag ID | |
| ~RV enable | Configure RFID reporting | |
| ^RW readPower, writePower, antennaElement | Configure RFID power levels | |
| ^RZ password, passwordType, lockType | Set RFID tag password | |
| ^SC baud, wordLength, parity, stopBits, protocolMode, protocol | Set serial communications | |
| ~SD darkness | Set darkness | |
| ^SE path | Select encoding | |
| ^SF mask, increment | Serialized field | |
| ^SI setting, value | Set sensor intensity | |
| ^SL mode, language | Set RTC mode and language | |
| ^SN start, increment, pad | Serialized data | |
| ^SO clock, months, days, years, hours, minutes, seconds | Set RTC offset | |
| ^SP row | Start print | |
| ^SQ condition, destination, halt | Halt alert | |
| ^SR resistance | Set printhead resistance | |
| ^SS web, media, ribbon, length, int1, int2, sense, mediaSense, ledSense | Set media sensors | |
| ^ST month, day, year, hour, minute, second, format | Set RTC date and time | |
| ^SX condition, destination, set, clear, setting, port | Set alert | |
| ^SZ version | Set ZPL version (version 2 only) | |
| ~TA adjustment | Tear-off adjust position | |
| ^TB orientation, maxWidth, maxHeight | Text block | |
| ^TO from, to | Transfer object | |
| ^WA receive, transmit | Configure wireless antenna | |
| ~WC | Print configuration label | |
| ^WD path | Print directory label | |
| ^WE mode, index, authType, keyType, key1, key2, key3, key4 | Configure WEP | |
| ^WF retries, motion, protect, format, type | Write RFID AFI or DSFID byte | |
| ^WL mode, username, password | Configure LEAP | |
| ~WL | Print network configuration label | |
| ^WP oldPassword, newPassword | Set wireless password | |
| ~WQ query | Write query | |
| ^WR rate1, rate2, rate55, rate11, power | Set wireless transmit rate | |
| ~WR | Reset wireless radio card | |
| ^WS essid, mode, preamble, pulse, interval, mask, international | Configure wireless radio card | |
| ^WT block, retries, motion, protect, format, verify | Write RFID tag | |
| ^WV enable | Configure RFID write verify | |
| ^WX securityType, parameters | Configure wireless security | |
| ^XA | Start format (alternate command: 0x02) | |
| ^XB | Supress backfeed | |
| ^XF path | Recall format | |
| ^XG path, magnificationX, magnificationY | Recall graphics | |
| ^XS length, threshold | Set dynamic calibration | |
| ^XZ | End format (alternate command: 0x03) | |
| ^ZZ seconds, immediate | Printer sleep |
You can simulate colored (or partially colored) label stock by using the non-standard ~BR ("background rectangle") and ~BI ("background image") commands.
These commands are ignored by physical printers, but Labelary will interpret them as requests to draw colored rectangles and images, respectively.
The ~BR command draws a colored rectangle on the label background. This command has 7 parameters:
A ~BR command without any parameters clears any previously registered background rectangles.
See here for an example of a label that uses this command to simulate label stock where the left side is white and the right side is yellow.
The ~BI command draws a color image on the label background. This command has 4 parameters:
A ~BI command without any parameters clears any previously registered background images.
See here for an example of a label that uses this command to simulate label stock with a color logo pre-printed in the upper right corner.
If you‘ve licensed Labelary for on-premise, offline use, there are a number of system properties that you can use to customize the behavior of the Labelary rendering engine:
Zebra ZPL printer command reference for PowerApps
标签：ima word having field write ping condition tracking unlock
原文地址：https://www.cnblogs.com/lingdanglfw/p/14348779.html
