码迷,mamicode.com
首页 > 系统相关 > 详细

在Linux服务器,搭建K8s服务【脚本篇】

时间:2021-06-02 13:27:20      阅读:0      评论:0      收藏:0      [点我收藏+]

标签:linux服务   fst   ISE   命名   yml   emptyDir   csrf   mkdir   csr   

前言

好久没有写博客了,本文主要是对网上文章的总结篇,主要是将安装和运行代码做了一次真机实验,亲测可用。文章内包含的脚本和代码,多来自于网络,也有我自己的调整和配置,文章末尾对参考的文献做了列举,方便大家参考。

过程很简单,一路next往下看和操作即可,文章不对脚本和代码做原理解释,某些注意点加了红色标注,部分脚本有注释,可以自行参考,以后有机会可以视频讲解。

核心步骤

因为是next的方式,所以本章节主要是操作步骤,步骤中涉及到的代码或者脚本,可以在下文中找到,比如:附录代码一、附录代码二等等,因为脚本实在太长,不太方便放到步骤里。

1、配置 node01 主节点(2个文件,1个结果);

在root目录下拷贝k8s脚本(附录代码一:kubernetes_node01.sh)和flannel网络(附录代码二:kube-flannel.yml)的文件;

然后给脚本文件赋权限:chmod +x kubernetes_node01.sh

最后执行脚本:./kubernetes_node01.sh

ps:1、sh脚本中,需要配置节点,是内网的。

2、多个节点之间要保证能ping通;

3、中间可能需要自己来配合做些操作,比如输入:y,来做确认等等。

最后,可以在当前文件夹下,看到一个key.txt的文件,里边有安装的结果数据或者密钥等,可查看附录代码三:key.txt,这是我安装的结果,里边有join主节点的配置语句。

查看所有的nodes和pods:

[root@node01 ~]# kubectl get nodes
NAME     STATUS   ROLES    AGE   VERSION
node01   Ready    master   26h   v1.18.0

 

所有的pods:

[root@node01 ~]# kubectl get pods -A
NAMESPACE              NAME                                         READY   STATUS    RESTARTS   AGE
kube-system            coredns-7ff77c879f-6m6fl                     1/1     Running   0          25m
kube-system            coredns-7ff77c879f-dkd56                     1/1     Running   0          25m
kube-system            etcd-node01                                  1/1     Running   0          26m
kube-system            kube-apiserver-node01                        1/1     Running   0          26m
kube-system            kube-controller-manager-node01               1/1     Running   0          26m
kube-system            kube-flannel-ds-amd64-sdv2h                  1/1     Running   0          25m
kube-system            kube-proxy-vgf4r                             1/1     Running   0          25m
kube-system            kube-scheduler-node01                        1/1     Running   0          26m

 

如果都启动,都READY了,表示安装成功。

 

2、配置dashboard仪表盘(2个文件)

上面安装好了kubectl、kubeadm、kubelet后,我们可以通过客户端来连接,这里安利下k8s的客户端:Lens,很香。

如果不用客户端,那就需要安装仪表盘了。

1、Linux根目录拷贝文件,附录代码四:recommended.yaml(安装看板),附录代码五:dashboard-svc-account.yaml(配置管理员账户)

2、执行命令:

sed -i /targetPort: 8443/a\ \ \ \ \ \ nodePort: 30001\n\ \ type: NodePort recommended.yaml

3、启动仪表盘服务:

kubectl apply -f recommended.yaml

4、启动配置账户:

kubectl apply -f dashboard-svc-account.yaml

 

都成功后,会生成一个token字符串,用来登录web端的令牌的,如果没有拷贝或者丢失了也不怕,可以使用命令查看:

kubectl describe secrets -n kube-system `kubectl get secret -n kube-system | grep admin | awk {print $1}` | grep ^token|awk {print $2}

 

token就是类似这种:

eyJhbGciOiJSUzI1NiIsImtpZCI6Ikl5SE00cXFZR1V2cWstQURVcGlUOGk4cTBYekZMV0VmNDEwRy14UTd1d2sifQ.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.BBtdG-S2kHEwRbWIAf6DiUgC3ILUOStPATyWfvxcQs5VJBtLRyMGqQ-AfkUoVLuhZdUv-CGoEJ1OYA00M6MwoehDdkhLFbXF7Xx1IPyhFTHxZ_oXHBPyjEREkTEerarZnvgt0ufU4g_Eqn91jdHet73itz-0abgmLMPkRl5YYjlh36Ivwq9IjKgujLwTNisUFckLuHOscHtQIrjIvAZlWTRh_awMsDHvemAKG_YIjMbyQnXi6VfN3rTW869DA0XAGOF2t7cWBtMmHvmLxVYqpOauUzwXXeYbO9eP0_d9JtVwKv6R0Q7sexRFZ-iTdZBOJDujFI3UT2jsqgVdbagA

 

这里再检查下:

查看所有的nodes和pods:

[root@node01 ~]# kubectl get pods -A
NAMESPACE              NAME                                         READY   STATUS    RESTARTS   AGE
kube-system            coredns-7ff77c879f-6m6fl                     1/1     Running   0          25m
kube-system            coredns-7ff77c879f-dkd56                     1/1     Running   0          25m
kube-system            etcd-node01                                  1/1     Running   0          26m
kube-system            kube-apiserver-node01                        1/1     Running   0          26m
kube-system            kube-controller-manager-node01               1/1     Running   0          26m
kube-system            kube-flannel-ds-amd64-sdv2h                  1/1     Running   0          25m
kube-system            kube-proxy-vgf4r                             1/1     Running   0          25m
kube-system            kube-scheduler-node01                        1/1     Running   0          26m
kubernetes-dashboard   dashboard-metrics-scraper-78f5d9f487-ldswx   1/1     Running   0          12m
kubernetes-dashboard   kubernetes-dashboard-577bd97bc-szvwt         1/1     Running   0          12m

 

多了kubernetes-dashboard命名空间下的两个pod。

 

 

3、配置 node02 子节点(1个文件)

如果你没有多余的服务器,也可以在master节点做自己的pod的,需要开启下,命令将 master 标记为可调度:

sudo kubectl taint nodes --all node-role.kubernetes.io/masteflr-

 

如果要配置多个子节点,那就仿照主节点来继续写sh脚本吧(附录代码六:kubernetes_node02.sh),步骤和主节点一致:

1、拷贝到子节点服务器;

2、赋权限,执行文件:./kubernetes_node02.sh

3、这里不用flannel配置;

4、安装完成后,可以join到主节点,配置文件在主节点的key.txt文件里,如果你安装成功了的话;

kubeadm join 172.17.10.4:6443 --token q3uu1o.4rdfkcyzxjhawvk1     --discovery-token-ca-cert-hash sha256:a755d8f56733ba8f9d1951298b200202fce7b84389954bf7a38558fa6ce2a9c9 

 

如果一切正常,可以去主节点查看所有的nodes:

NAME     STATUS   ROLES    AGE   VERSION
node01   Ready    master   26h   v1.18.0
node02   Ready    <none>   25h   v1.18.0

表示我们的子节点已经配置完成。

 

 

4、配置ASP.Net Core服务

这里的Deployment+Service的写法比较简单,直接贴出来,就不做过多的解释了。

apiVersion: apps/v1
kind: Deployment
metadata:
  labels:
    app: laozhang-op2
  name: laozhang-op2
spec:
  selector:
    matchLabels:
      app: laozhang-op2
  replicas: 2
  template:
    metadata:
      labels:
        app: laozhang-op2
    spec:
      containers:
        - name: laozhang-op2
          image: laozhangisphi/apkimg315
          imagePullPolicy: IfNotPresent #pull镜像时机,

----
apiVersion: v1
kind: Service
metadata:
  name: laozhang-op2
spec:
  type: NodePort
  ports:
  - name: default
    protocol: TCP
    port: 80
    targetPort: 80
    nodePort: 30099 
  selector:
    app: laozhang-op2   

 

但是这种是nodePort的方式,平时使用更多的是Ingress的方式,那使用ingress,就先需要配置ingress的服务。

 

5、配置Ingress-nginx(1个文件)

在根目录拷贝文件,附录代码七:mandatory.yaml,配置Ingress-Nginx服务,

这里需要注意下,如果服务器之前已经配置过nginx,需要在mandatory.yaml文件中,修改http-port输出端口,详细内容见下面的代码,有注释。

直接执行yaml:

kubectl apply -f mandatory.yaml

 

如果没有报错,可以查看所有的pods:

[root@node01 ~]# kubectl get pods -A
NAMESPACE              NAME                                         READY   STATUS    RESTARTS   AGE
default                laozhang-op2-5cf487b57f-pdvfg                    1/1     Running   0          4h29m
default                laozhang-op2-5cf487b57f-vtgwc                    1/1     Running   0          4h29m
ingress-nginx          nginx-ingress-controller-557475687f-rfl98    1/1     Running   0          122m
kube-system            coredns-7ff77c879f-gj4sl                     1/1     Running   0          26h
kube-system            coredns-7ff77c879f-mqp2q                     1/1     Running   0          26h
kube-system            etcd-node01                                  1/1     Running   0          26h
kube-system            kube-apiserver-node01                        1/1     Running   0          26h
kube-system            kube-controller-manager-node01               1/1     Running   0          26h
kube-system            kube-flannel-ds-amd64-nmnj2                  1/1     Running   0          26h
kube-system            kube-proxy-wcjb8                             1/1     Running   0          26h
kube-system            kube-scheduler-node01                        1/1     Running   2          26h
kubernetes-dashboard   dashboard-metrics-scraper-78f5d9f487-qp2fw   1/1     Running   0          26h
kubernetes-dashboard   kubernetes-dashboard-577bd97bc-2tsj7         1/1     Running   0          26h

 

如果和上面一样,那恭喜,一切配置就完成了。

 

 

附录代码一:kubernetes_node01.sh

#!/bin/bash
##############
##主节点##
##############

#### 第一部分,环境初始化 ####
#k8s版本
version=v1.18.0
kubelet=kubelet-1.18.0-0.x86_64
kubeadm=kubeadm-1.18.0-0.x86_64
kubectl=kubectl-1.18.0-0.x86_64
#集群加入方式
key=/root/key.txt
#部署flannel网络
flannel=/root/kube-flannel.yml
#安装必要依赖
yum -y install vim wget git cmake make gcc gcc-c++ net-tools lrzsz


#### 第二部分,节点配置 ####
#主机解析,免密登录
#内网ip,配置多节点,也可以不配置,后期通过join的方式
node01=172.21.10.4
#node02=192.168.10.7
#node03=192.168.1.30
hostnamectl set-hostname node01 
echo  172.21.10.4 node01
#192.168.10.7 node02
#192.168.1.30 node03 >> /etc/hosts
ssh-keygen
ssh-copy-id  -i $node01
#ssh-copy-id  -i $node02
#ssh-copy-id  -i $node03
#scp /etc/hosts node02:/etc/hosts
#scp /etc/hosts node03:/etc/hosts
#关闭防火墙
systemctl stop firewalld
systemctl disable firewalld
#swap分区关闭
swapoff -a 
sed -i s/.*swap.*/#&/ /etc/fstab
#关闭沙盒
setenforce  0 
sed -i "s/^SELINUX=enforcing/SELINUX=disabled/g" /etc/sysconfig/selinux 
sed -i "s/^SELINUX=enforcing/SELINUX=disabled/g" /etc/selinux/config 
sed -i "s/^SELINUX=permissive/SELINUX=disabled/g" /etc/sysconfig/selinux 
sed -i "s/^SELINUX=permissive/SELINUX=disabled/g" /etc/selinux/config  
#打开ipv6
modprobe br_netfilter
modprobe  ip_vs_rr
cat <<EOF >  /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
vm.swappiness = 0 
EOF
sysctl -p /etc/sysctl.d/k8s.conf
ls /proc/sys/net/bridge


#### 第三部分,参数/源处理 ####
#安装epel源
yum install -y epel-release
yum install -y yum-utils device-mapper-persistent-data lvm2 net-tools conntrack-tools wget vim  ntpdate libseccomp libtool-ltdl 
#时区校准
systemctl enable ntpdate.service
echo */30 * * * * /usr/sbin/ntpdate time7.aliyun.com >/dev/null 2>&1 > /tmp/crontab2.tmp
crontab /tmp/crontab2.tmp
systemctl start ntpdate.service
#添加参数
echo "* soft nofile 65536" >> /etc/security/limits.conf
echo "* hard nofile 65536" >> /etc/security/limits.conf
echo "* soft nproc 65536"  >> /etc/security/limits.conf
echo "* hard nproc 65536"  >> /etc/security/limits.conf
echo "* soft  memlock  unlimited"  >> /etc/security/limits.conf
echo "* hard memlock  unlimited"  >> /etc/security/limits.conf
#添加kubernetes的epel源
echo [kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg‘ > /etc/yum.repos.d/kubernetes.repo
#下载
sudo yum-config-manager     --add-repo     https://mirrors.ustc.edu.cn/docker-ce/linux/centos/docker-ce.repo
yum makecache fast


#### 第四部分,开始安装 ####
yum -y install docker-ce
yum install --enablerepo="kubernetes" $kubelet $kubeadm  $kubectl
systemctl enable kubelet.service && systemctl start kubelet.service
systemctl start docker.service &&  systemctl enable docker.service
#安装tab快捷键
yum -y  install bash-completion && source /usr/share/bash-completion/bash_completion && source <(kubectl completion bash) && echo "source <(kubectl completion bash)" >> ~/.bashrc
#创建集群
kubeadm init --apiserver-advertise-address $node01 --image-repository registry.aliyuncs.com/google_containers --kubernetes-version $version --pod-network-cidr=10.244.0.0/16 >> $key  2>&1
export KUBECONFIG=/etc/kubernetes/admin.conf
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
docker pull quay.io/coreos/flannel:v0.12.0-amd64
kubectl apply -f $flannel
echo  请手动查看$key文件的密钥将其他节点接入集群

 

 

附录代码二:kube-flannel.yml

##############
##flannel网络##
##############
---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
  name: psp.flannel.unprivileged
  annotations:
    seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/default
    seccomp.security.alpha.kubernetes.io/defaultProfileName: docker/default
    apparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/default
    apparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
spec:
  privileged: false
  volumes:
    - configMap
    - secret
    - emptyDir
    - hostPath
  allowedHostPaths:
    - pathPrefix: "/etc/cni/net.d"
    - pathPrefix: "/etc/kube-flannel"
    - pathPrefix: "/run/flannel"
  readOnlyRootFilesystem: false
  # Users and groups
  runAsUser:
    rule: RunAsAny
  supplementalGroups:
    rule: RunAsAny
  fsGroup:
    rule: RunAsAny
  # Privilege Escalation
  allowPrivilegeEscalation: false
  defaultAllowPrivilegeEscalation: false
  # Capabilities
  allowedCapabilities: [NET_ADMIN]
  defaultAddCapabilities: []
  requiredDropCapabilities: []
  # Host namespaces
  hostPID: false
  hostIPC: false
  hostNetwork: true
  hostPorts:
  - min: 0
    max: 65535
  # SELinux
  seLinux:
    # SELinux is unused in CaaSP
    rule: RunAsAny
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: flannel
rules:
  - apiGroups: [extensions]
    resources: [podsecuritypolicies]
    verbs: [use]
    resourceNames: [psp.flannel.unprivileged]
  - apiGroups:
      - ""
    resources:
      - pods
    verbs:
      - get
  - apiGroups:
      - ""
    resources:
      - nodes
    verbs:
      - list
      - watch
  - apiGroups:
      - ""
    resources:
      - nodes/status
    verbs:
      - patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: flannel
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: flannel
subjects:
- kind: ServiceAccount
  name: flannel
  namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: flannel
  namespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:
  name: kube-flannel-cfg
  namespace: kube-system
  labels:
    tier: node
    app: flannel
data:
  cni-conf.json: |
    {
      "name": "cbr0",
      "cniVersion": "0.3.1",
      "plugins": [
        {
          "type": "flannel",
          "delegate": {
            "hairpinMode": true,
            "isDefaultGateway": true
          }
        },
        {
          "type": "portmap",
          "capabilities": {
            "portMappings": true
          }
        }
      ]
    }
  net-conf.json: |
    {
      "Network": "10.244.0.0/16",
      "Backend": {
        "Type": "vxlan"
      }
    }
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-amd64
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: kubernetes.io/arch
                    operator: In
                    values:
                      - amd64
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.12.0-amd64
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.12.0-amd64
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
            add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-arm64
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: kubernetes.io/arch
                    operator: In
                    values:
                      - arm64
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.12.0-arm64
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.12.0-arm64
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-arm
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: kubernetes.io/arch
                    operator: In
                    values:
                      - arm
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.12.0-arm
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.12.0-arm
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-ppc64le
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: kubernetes.io/arch
                    operator: In
                    values:
                      - ppc64le
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.12.0-ppc64le
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.12.0-ppc64le
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-s390x
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: kubernetes.io/arch
                    operator: In
                    values:
                      - s390x
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.12.0-s390x
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.12.0-s390x
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg

 

附录代码三:key.txt

W0526 16:17:20.680490   13760 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io]
[init] Using Kubernetes version: v1.18.0
[preflight] Running pre-flight checks
    [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using kubeadm config images pull
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [node01 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.17.10.4]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [node01 localhost] and IPs [172.17.10.4 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [node01 localhost] and IPs [172.17.10.4 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
W0526 16:18:02.560249   13760 manifests.go:225] the default kube-apiserver authorization-mode is "Node,RBAC"; using "Node,RBAC"
[control-plane] Creating static Pod manifest for "kube-scheduler"
W0526 16:18:02.561130   13760 manifests.go:225] the default kube-apiserver authorization-mode is "Node,RBAC"; using "Node,RBAC"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 26.504466 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.18" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node node01 as control-plane by adding the label "node-role.kubernetes.io/master=‘‘"
[mark-control-plane] Marking the node node01 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: q3uu1o.4rdfkcyzxjhawvk1
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 172.17.10.4:6443 --token q3uu1o.4rdfkcyzxjhawvk1     --discovery-token-ca-cert-hash sha256:a755d8f56733ba8f9d1951298b200202fce7b84389954bf7a38558fa6ce2a9c9 







附录代码四:recommended.yaml

 

# Copyright 2017 The Kubernetes Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

##############
##安装dashboard##
##############

apiVersion: v1
kind: Namespace
metadata:
  name: kubernetes-dashboard

---

apiVersion: v1
kind: ServiceAccount
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard

---

kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
spec:
  ports:
    - port: 443
      targetPort: 8443
  selector:
    k8s-app: kubernetes-dashboard

---

apiVersion: v1
kind: Secret
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard-certs
  namespace: kubernetes-dashboard
type: Opaque

---

apiVersion: v1
kind: Secret
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard-csrf
  namespace: kubernetes-dashboard
type: Opaque
data:
  csrf: ""

---

apiVersion: v1
kind: Secret
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard-key-holder
  namespace: kubernetes-dashboard
type: Opaque

---

kind: ConfigMap
apiVersion: v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard-settings
  namespace: kubernetes-dashboard

---

kind: Role
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
rules:
  # Allow Dashboard to get, update and delete Dashboard exclusive secrets.
  - apiGroups: [""]
    resources: ["secrets"]
    resourceNames: ["kubernetes-dashboard-key-holder", "kubernetes-dashboard-certs", "kubernetes-dashboard-csrf"]
    verbs: ["get", "update", "delete"]
    # Allow Dashboard to get and update kubernetes-dashboard-settings config map.
  - apiGroups: [""]
    resources: ["configmaps"]
    resourceNames: ["kubernetes-dashboard-settings"]
    verbs: ["get", "update"]
    # Allow Dashboard to get metrics.
  - apiGroups: [""]
    resources: ["services"]
    resourceNames: ["heapster", "dashboard-metrics-scraper"]
    verbs: ["proxy"]
  - apiGroups: [""]
    resources: ["services/proxy"]
    resourceNames: ["heapster", "http:heapster:", "https:heapster:", "dashboard-metrics-scraper", "http:dashboard-metrics-scraper"]
    verbs: ["get"]

---

kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
rules:
  # Allow Metrics Scraper to get metrics from the Metrics server
  - apiGroups: ["metrics.k8s.io"]
    resources: ["pods", "nodes"]
    verbs: ["get", "list", "watch"]

---

apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: kubernetes-dashboard
subjects:
  - kind: ServiceAccount
    name: kubernetes-dashboard
    namespace: kubernetes-dashboard

---

apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: kubernetes-dashboard
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: kubernetes-dashboard
subjects:
  - kind: ServiceAccount
    name: kubernetes-dashboard
    namespace: kubernetes-dashboard

---

kind: Deployment
apiVersion: apps/v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
spec:
  replicas: 1
  revisionHistoryLimit: 10
  selector:
    matchLabels:
      k8s-app: kubernetes-dashboard
  template:
    metadata:
      labels:
        k8s-app: kubernetes-dashboard
    spec:
      containers:
        - name: kubernetes-dashboard
          image: kubernetesui/dashboard:v2.2.0
          imagePullPolicy: Always
          ports:
            - containerPort: 8443
              protocol: TCP
          args:
            - --auto-generate-certificates
            - --namespace=kubernetes-dashboard
            # Uncomment the following line to manually specify Kubernetes API server Host
            # If not specified, Dashboard will attempt to auto discover the API server and connect
            # to it. Uncomment only if the default does not work.
            # - --apiserver-host=http://my-address:port
          volumeMounts:
            - name: kubernetes-dashboard-certs
              mountPath: /certs
              # Create on-disk volume to store exec logs
            - mountPath: /tmp
              name: tmp-volume
          livenessProbe:
            httpGet:
              scheme: HTTPS
              path: /
              port: 8443
            initialDelaySeconds: 30
            timeoutSeconds: 30
          securityContext:
            allowPrivilegeEscalation: false
            readOnlyRootFilesystem: true
            runAsUser: 1001
            runAsGroup: 2001
      volumes:
        - name: kubernetes-dashboard-certs
          secret:
            secretName: kubernetes-dashboard-certs
        - name: tmp-volume
          emptyDir: {}
      serviceAccountName: kubernetes-dashboard
      nodeSelector:
        "kubernetes.io/os": linux
      # Comment the following tolerations if Dashboard must not be deployed on master
      tolerations:
        - key: node-role.kubernetes.io/master
          effect: NoSchedule

---

kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: dashboard-metrics-scraper
  name: dashboard-metrics-scraper
  namespace: kubernetes-dashboard
spec:
  ports:
    - port: 8000
      targetPort: 8000
  selector:
    k8s-app: dashboard-metrics-scraper

---

kind: Deployment
apiVersion: apps/v1
metadata:
  labels:
    k8s-app: dashboard-metrics-scraper
  name: dashboard-metrics-scraper
  namespace: kubernetes-dashboard
spec:
  replicas: 1
  revisionHistoryLimit: 10
  selector:
    matchLabels:
      k8s-app: dashboard-metrics-scraper
  template:
    metadata:
      labels:
        k8s-app: dashboard-metrics-scraper
      annotations:
        seccomp.security.alpha.kubernetes.io/pod: runtime/default
    spec:
      containers:
        - name: dashboard-metrics-scraper
          image: kubernetesui/metrics-scraper:v1.0.6
          ports:
            - containerPort: 8000
              protocol: TCP
          livenessProbe:
            httpGet:
              scheme: HTTP
              path: /
              port: 8000
            initialDelaySeconds: 30
            timeoutSeconds: 30
          volumeMounts:
          - mountPath: /tmp
            name: tmp-volume
          securityContext:
            allowPrivilegeEscalation: false
            readOnlyRootFilesystem: true
            runAsUser: 1001
            runAsGroup: 2001
      serviceAccountName: kubernetes-dashboard
      nodeSelector:
        "kubernetes.io/os": linux
      # Comment the following tolerations if Dashboard must not be deployed on master
      tolerations:
        - key: node-role.kubernetes.io/master
          effect: NoSchedule
      volumes:
        - name: tmp-volume
          emptyDir: {}

 

 

 


附录代码五:dashboard-svc-account.yaml

 

##############
##配置dashboard管理员账号##
##############

apiVersion: v1
kind: ServiceAccount
metadata:
  name: dashboard-admin
  namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: dashboard-admin
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: cluster-admin
subjects:
  - kind: ServiceAccount
    name: dashboard-admin
    namespace: kube-system

 

 

附录代码六:kubernetes_node02.sh

 

#!/bin/bash
##############
##子节点##
##############

#### 第一部分,环境初始化 ####
#k8s版本
version=v1.18.0
kubelet=kubelet-1.18.0-0.x86_64
kubeadm=kubeadm-1.18.0-0.x86_64
kubectl=kubectl-1.18.0-0.x86_64

#集群加入方式
key=/root/key.txt
#部署flannel网络
flannel=/root/kube-flannel.yml
#安装必要依赖
yum -y install vim wget git cmake make gcc gcc-c++ net-tools lrzsz


#### 第二部分,节点配置 ####
#配置节点,主机解析,免密登录
node01=172.17.10.4
node02=172.17.10.7
# node03=192.168.1.30
hostnamectl set-hostname node02 
echo  172.17.10.4 node01
172.17.10.7 node02 >> /etc/hosts
ssh-keygen
ssh-copy-id  -i $node01
ssh-copy-id  -i $node02
# ssh-copy-id  -i $node03
scp /etc/hosts node02:/etc/hosts
# scp /etc/hosts node03:/etc/hosts

#关闭防火墙
systemctl stop firewalld
systemctl disable firewalld
#swap分区关闭
swapoff -a 
sed -i s/.*swap.*/#&/ /etc/fstab
#关闭沙盒
setenforce  0 
sed -i "s/^SELINUX=enforcing/SELINUX=disabled/g" /etc/sysconfig/selinux 
sed -i "s/^SELINUX=enforcing/SELINUX=disabled/g" /etc/selinux/config 
sed -i "s/^SELINUX=permissive/SELINUX=disabled/g" /etc/sysconfig/selinux 
sed -i "s/^SELINUX=permissive/SELINUX=disabled/g" /etc/selinux/config  
#打开ipv6
modprobe br_netfilter
modprobe  ip_vs_rr
cat <<EOF >  /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
vm.swappiness = 0 
EOF
sysctl -p /etc/sysctl.d/k8s.conf
ls /proc/sys/net/bridge


#### 第三部分,参数/源处理 ####
#安装epel源
yum install -y epel-release
yum install -y yum-utils device-mapper-persistent-data lvm2 net-tools conntrack-tools wget vim  ntpdate libseccomp libtool-ltdl 
#时区校准
systemctl enable ntpdate.service
echo */30 * * * * /usr/sbin/ntpdate time7.aliyun.com >/dev/null 2>&1 > /tmp/crontab2.tmp
crontab /tmp/crontab2.tmp
systemctl start ntpdate.service
#添加参数
echo "* soft nofile 65536" >> /etc/security/limits.conf
echo "* hard nofile 65536" >> /etc/security/limits.conf
echo "* soft nproc 65536"  >> /etc/security/limits.conf
echo "* hard nproc 65536"  >> /etc/security/limits.conf
echo "* soft  memlock  unlimited"  >> /etc/security/limits.conf
echo "* hard memlock  unlimited"  >> /etc/security/limits.conf
#添加kubernetes的epel源
echo [kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg‘ > /etc/yum.repos.d/kubernetes.repo
#下载
sudo yum-config-manager     --add-repo     https://mirrors.ustc.edu.cn/docker-ce/linux/centos/docker-ce.repo
yum makecache fast


#### 第四部分,开始安装 ####
yum -y install docker-ce
yum install --enablerepo="kubernetes" $kubelet $kubeadm  $kubectl
systemctl enable kubelet.service && systemctl start kubelet.service
systemctl start docker.service &&  systemctl enable docker.service
#安装tab快捷键
yum -y  install bash-completion && source /usr/share/bash-completion/bash_completion && source <(kubectl completion bash) && echo "source <(kubectl completion bash)" >> ~/.bashrc
#创建集群
docker pull quay.io/coreos/flannel:v0.12.0-amd64
echo  请手动查看主节点$key文件的密钥将其他节点接入集群

 

 


附录代码七:mandatory.yaml

##############
##配置ingress-nginx服务##
##############
apiVersion: v1
kind: Namespace
metadata:
  name: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx

---

kind: ConfigMap
apiVersion: v1
metadata:
  name: nginx-configuration
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx

---
kind: ConfigMap
apiVersion: v1
metadata:
  name: tcp-services
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx

---
kind: ConfigMap
apiVersion: v1
metadata:
  name: udp-services
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx

---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: nginx-ingress-serviceaccount
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx

---
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRole
metadata:
  name: nginx-ingress-clusterrole
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
rules:
  - apiGroups:
      - ""
    resources:
      - configmaps
      - endpoints
      - nodes
      - pods
      - secrets
    verbs:
      - list
      - watch
  - apiGroups:
      - ""
    resources:
      - nodes
    verbs:
      - get
  - apiGroups:
      - ""
    resources:
      - services
    verbs:
      - get
      - list
      - watch
  - apiGroups:
      - ""
    resources:
      - events
    verbs:
      - create
      - patch
  - apiGroups:
      - "extensions"
      - "networking.k8s.io"
    resources:
      - ingresses
    verbs:
      - get
      - list
      - watch
  - apiGroups:
      - "extensions"
      - "networking.k8s.io"
    resources:
      - ingresses/status
    verbs:
      - update

---
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: Role
metadata:
  name: nginx-ingress-role
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
rules:
  - apiGroups:
      - ""
    resources:
      - configmaps
      - pods
      - secrets
      - namespaces
    verbs:
      - get
  - apiGroups:
      - ""
    resources:
      - configmaps
    resourceNames:
      # Defaults to "<election-id>-<ingress-class>"
      # Here: "<ingress-controller-leader>-<nginx>"
      # This has to be adapted if you change either parameter
      # when launching the nginx-ingress-controller.
      - "ingress-controller-leader-nginx"
    verbs:
      - get
      - update
  - apiGroups:
      - ""
    resources:
      - configmaps
    verbs:
      - create
  - apiGroups:
      - ""
    resources:
      - endpoints
    verbs:
      - get

---
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: RoleBinding
metadata:
  name: nginx-ingress-role-nisa-binding
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: nginx-ingress-role
subjects:
  - kind: ServiceAccount
    name: nginx-ingress-serviceaccount
    namespace: ingress-nginx

---
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRoleBinding
metadata:
  name: nginx-ingress-clusterrole-nisa-binding
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: nginx-ingress-clusterrole
subjects:
  - kind: ServiceAccount
    name: nginx-ingress-serviceaccount
    namespace: ingress-nginx

---

apiVersion: apps/v1
kind: Deployment
metadata:
  name: nginx-ingress-controller
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
spec:
  replicas: 1
  selector:
    matchLabels:
      app.kubernetes.io/name: ingress-nginx
      app.kubernetes.io/part-of: ingress-nginx
  template:
    metadata:
      labels:
        app.kubernetes.io/name: ingress-nginx
        app.kubernetes.io/part-of: ingress-nginx
      annotations:
        prometheus.io/port: "10254"
        prometheus.io/scrape: "true"
    spec:
      hostNetwork: true 
      # wait up to five minutes for the drain of connections
      terminationGracePeriodSeconds: 300
      serviceAccountName: nginx-ingress-serviceaccount
      nodeSelector:
        Ingress: nginx
        kubernetes.io/os: linux
      containers:
        - name: nginx-ingress-controller
          image: quay.io/kubernetes-ingress-controller/nginx-ingress-controller:0.29.0
          args:
            - /nginx-ingress-controller
            - --configmap=$(POD_NAMESPACE)/nginx-configuration
            - --tcp-services-configmap=$(POD_NAMESPACE)/tcp-services
            - --udp-services-configmap=$(POD_NAMESPACE)/udp-services
            - --publish-service=$(POD_NAMESPACE)/ingress-nginx
            - --annotations-prefix=nginx.ingress.kubernetes.io
            - --http-port=8080 # 如果你的master服务器已经安装了nginx,这里需要修改下,否则无法启动ingress-nginx服务
            - --https-port=8443 # 同上
          securityContext:
            allowPrivilegeEscalation: true
            capabilities:
              drop:
                - ALL
              add:
                - NET_BIND_SERVICE
            # www-data -> 101
            runAsUser: 101
          env:
            - name: POD_NAME
              valueFrom:
                fieldRef:
                  fieldPath: metadata.name
            - name: POD_NAMESPACE
              valueFrom:
                fieldRef:
                  fieldPath: metadata.namespace
          ports:
            - name: http
              containerPort: 80
              protocol: TCP
            - name: https
              containerPort: 443
              protocol: TCP
          livenessProbe:
            failureThreshold: 3
            httpGet:
              path: /healthz
              port: 10254
              scheme: HTTP
            initialDelaySeconds: 10
            periodSeconds: 10
            successThreshold: 1
            timeoutSeconds: 10
          readinessProbe:
            failureThreshold: 3
            httpGet:
              path: /healthz
              port: 10254
              scheme: HTTP
            periodSeconds: 10
            successThreshold: 1
            timeoutSeconds: 10
          lifecycle:
            preStop:
              exec:
                command:
                  - /wait-shutdown

---

apiVersion: v1
kind: LimitRange
metadata:
  name: ingress-nginx
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
spec:
  limits:
  - min:
      memory: 90Mi
      cpu: 100m
    type: Container

 

 

参考文献:

https://blog.csdn.net/qq_37746855/article/details/116173976

https://blog.csdn.net/weixin_46152207/article/details/111355788

https://blog.csdn.net/catcher92/article/details/116207040

https://blog.51cto.com/u_14306186/2523096

 



 

在Linux服务器,搭建K8s服务【脚本篇】

标签:linux服务   fst   ISE   命名   yml   emptyDir   csrf   mkdir   csr   

原文地址:https://www.cnblogs.com/laozhang-is-phi/p/14819009.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!