码迷,mamicode.com
首页 > 系统相关 > 详细

Linux Shell参数扩展(Parameter Expansion)

时间:2014-11-19 01:53:52      阅读:269      评论:0      收藏:0      [点我收藏+]

标签:linux   bash   linux shell   parameter expansion   

本文主要参考:http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_06_02

其他资料:http://www.ibm.com/developerworks/cn/linux/l-bash-parameters.html


参数扩展的表示形式为:${expression}。expression包括各种字符直到匹配上‘}‘。当出现以下情况时候‘}‘不会被检查来匹配:

1)在转义字符\之后,如\{;

2)在引号里面,如‘}’;

3) 在算术表达式,命令替换或者变量扩展里面的,如${value}


最简单的参数扩展形式如:${parameter}

使用如下模式可以修改参数扩展:

${parameter:-[word]}
Use Default Values. If parameter is unset or null, the expansion of word (or an empty string if word is omitted) shall be substituted; otherwise, the value of parameter shall be substituted.
当${parameter}值为空或者没有设定的时候,用[word]值来替换,否则它就是该表达式的值。
[hdfs@cdh51kdc ~]$ bb=3
[hdfs@cdh51kdc ~]$ echo ${aa}

[hdfs@cdh51kdc ~]$ echo ${bb}
3
[hdfs@cdh51kdc ~]$ echo ${aa-${bb}}
3
[hdfs@cdh51kdc ~]$ aa=2
[hdfs@cdh51kdc ~]$ echo ${aa-${bb}}
2
${parameter:=[word]}
Assign Default Values. If parameter is unset or null, the expansion of word (or an empty string if word is omitted) shall be assigned to parameter. In all cases, the final value of parameter shall be substituted. Only variables, not positional parameters or special parameters, can be assigned in this way.
当${parameter}值为空或者没有设定的时候,用[word]值来给${parameter}赋值并替换最后的表达式,否则它就是该表达式的值。
[hdfs@cdh51kdc ~]$ echo ${aa-${bb}}
2
[hdfs@cdh51kdc ~]$ echo ${aa:=${bb}}
2
[hdfs@cdh51kdc ~]$ echo ${cc}

[hdfs@cdh51kdc ~]$ echo ${cc:=${bb}}
3
[hdfs@cdh51kdc ~]$ echo ${cc}
3
${parameter:?[word]}
Indicate Error if Null or Unset. If parameter is unset or null, the expansion of word (or a message indicating it is unset if word is omitted) shall be written to standard error and the shell exits with a non-zero exit status. Otherwise, the value of parameter shall be substituted. An interactive shell need not exit.
当${parameter}值为空或者没有设定的时候,用[word]值作为标准错误输出提示并退出shell且返回非0状态。否则它就是该表达式的值。
[hdfs@cdh51kdc ~]$ echo ${cc:?"Value not set"}
3
[hdfs@cdh51kdc ~]$ echo ${dd:?"Value not set"}
-bash: dd: Value not set

${parameter:+[word]}
Use Alternative Value. If parameter is unset or null, null shall be substituted; otherwise, the expansion of word (or an empty string if word is omitted) shall be substituted.
当${parameter}值为空或者没有设定的时候,表达式返回null。否则用[word]替换表达式的值。
[hdfs@cdh51kdc ~]$ echo ${cc:+"Value not set"}
Value not set
[hdfs@cdh51kdc ~]$ echo ${dd:+"Value not set"}

${#parameter}

String Length. The length in characters of the value of parameter shall be substituted. If parameter is ‘*‘ or ‘@‘, the result of the expansion is unspecified. If parameter is unset and set -u is in effect, the expansion shall fail.
表达式返回${parameter}值中字符的个数。
[hdfs@cdh51kdc ~]$ echo ${#cc}
1
[hdfs@cdh51kdc ~]$ echo ${#dd}
0

The following four varieties of parameter expansion provide for substring processing. In each case, pattern matching notation (see Pattern Matching Notation), rather than regular expression notation, shall be used to evaluate the patterns. If parameter is ‘#‘‘*‘, or ‘@‘, the result of the expansion is unspecified. If parameter is unset and set -u is in effect, the expansion shall fail. Enclosing the full parameter expansion string in double-quotes shall not cause the following four varieties of pattern characters to be quoted, whereas quoting characters within the braces shall have this effect. In each variety, if word is omitted, the empty pattern shall be used.

${parameter%[word]}

Remove Smallest Suffix Pattern. The word shall be expanded to produce a pattern. The parameter expansion shall then result in parameter, with the smallest portion of the suffix matched by the pattern deleted. If present,word shall not begin with an unquoted ‘%‘.
用[word]产生的模式来匹配${parameter}的后缀并去除掉最小匹配部分
[hdfs@cdh51kdc ~]$ echo ${cc}
Value not set
[hdfs@cdh51kdc ~]$ echo ${cc%"et"}
Value not s
${parameter%%[word]}
Remove Largest Suffix Pattern. The word shall be expanded to produce a pattern. The parameter expansion shall then result in parameter, with the largest portion of the suffix matched by the pattern deleted.
用[word]产生的模式来匹配${parameter}的后缀并去除掉最大匹配部分
[hdfs@cdh51kdc ~]$ echo ${cc%%t*}
Value no
[hdfs@cdh51kdc ~]$ echo ${cc%t*}
Value not se
${parameter#[word]}
Remove Smallest Prefix Pattern. The word shall be expanded to produce a pattern. The parameter expansion shall then result in parameter, with the smallest portion of the prefix matched by the pattern deleted. If present, word shall not begin with an unquoted ‘#‘.
${parameter##[word]}
Remove Largest Prefix Pattern. The word shall be expanded to produce a pattern. The parameter expansion shall then result in parameter, with the largest portion of the prefix matched by the pattern deleted.
最后两个分别是去除掉前缀的[word]最小匹配和最大匹配
[hdfs@cdh51kdc ~]$ echo ${cc#*t}
set
[hdfs@cdh51kdc ~]$ echo ${cc##*t}

[hdfs@cdh51kdc ~]$ echo ${cc#V}
alue not set



Linux Shell参数扩展(Parameter Expansion)

标签:linux   bash   linux shell   parameter expansion   

原文地址:http://blog.csdn.net/tanzhangwen/article/details/41248671

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!