标签：des http ar io os sp for strong on
libc++ is a new implementation of the C++ standard library, targeting C++11.
All of the code in libc++ is dual licensed under the MIT license and the UIUC License (a BSD-like license).
After its initial introduction, many people have asked "why start a new library instead of contributing to an existing library?" (like Apache‘s libstdcxx, GNU‘s libstdc++, STLport, etc). There are many contributing reasons, but some of the major ones are:
From years of experience (including having implemented the standard library before), we‘ve learned many things about implementing the standard containers which require ABI breakage and fundamental changes to how they are implemented. For example, it is generally accepted that building std::string using the "short string optimization" instead of using Copy On Write (COW) is a superior approach for multicore machines (particularly in C++11, which has rvalue references). Breaking ABI compatibility with old versions of the library was determined to be critical to achieving the performance goals of libc++.
Mainline libstdc++ has switched to GPL3, a license which the developers of libc++ cannot use. libstdc++ 4.2 (the last GPL2 version) could be independently extended to support C++11, but this would be a fork of the codebase (which is often seen as worse for a project than starting a new independent one). Another problem with libstdc++ is that it is tightly integrated with G++ development, tending to be tied fairly closely to the matching version of G++.
STLport and the Apache libstdcxx library are two other popular candidates, but both lack C++11 support. Our experience (and the experience of libstdc++ developers) is that adding support for C++11 (in particular rvalue references and move-only types) requires changes to almost every class and function, essentially amounting to a rewrite. Faced with a rewrite, we decided to start from scratch and evaluate every design decision from first principles based on experience.
Further, both projects are apparently abandoned: STLport 5.2.1 was released in Oct‘08, and STDCXX 4.2.1 in May‘08.
libc++ is known to work on the following platforms, using g++-4.2 and clang (lack of C++11 language support disables some functionality). Note that functionality provided by <atomic> is only functional with clang.
libc++ is a 100% complete C++11 implementation on Apple‘s OS X.
LLVM and Clang can self host in C++ and C++11 mode with libc++ on Linux.
libc++ is also a 100% complete C++14 implementation. A list of new features and changes for C++14 can be found here.
A list of features and changes for the next C++ standard, known here as "C++1z" (probably to be C++17) can be found here.
Implementation of the post-c++14 Technical Specifications is in progress. A list of features and the current status of these features can be found here.
Ports to other platforms are underway. Here are recent test results for Windows and Linux.
The latest libc++ build results can be found at the following locations.
First please review our Developer‘s Policy.
On Mac OS 10.7 (Lion) and later, the easiest way to get this library is to install Xcode 4.2 or later. However if you want to install tip-of-trunk from here (getting the bleeding edge), read on. However, be warned that Mac OS 10.7 will not boot without a valid copy of libc++.1.dylib in /usr/lib.
To check out the code, use:
svn co http://llvm.org/svn/llvm-project/libcxx/trunk libcxxNote that for an in-tree build, you should check out libcxx to llvm/projects.
The following instructions are for building libc++ on FreeBSD, Linux, or Mac using libc++abi as the C++ ABI library. On Linux, it is also possible to use libsupc++ or libcxxrt.
In-tree build:
cd llvmmkdir build && cd buildcmake .. # Linux may require -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++make cxxOut-of-tree build:
cd libcxxmkdir build && cd buildcmake -DLIBCXX_CXX_ABI=libcxxabi -DLIBCXX_LIBCXXABI_INCLUDE_PATHS=path/to/libcxxabi/include -DLIT_EXECUTABLE=path/to/llvm/utils/lit/lit.py .. # Linux may require -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++makeTo run the tests:
make check-libcxxIf you wish to run a subset of the test suite:
cd path/to/libcxx/libcxxalias lit=‘python path/to/llvm/utils/lit/lit.py‘ln -s path/to/build/dir/projects/libcxx/test/lit.site.cfg test/lit.site.cfglit -sv test/re/ # or whichever subset of tests you‘re interested inThe above is currently quite inconvenient. Sorry! We‘re working on it!
More information on using LIT can be found here. For more general information about the LLVM testing infrastructure, see the LLVM Testing Infrastructure Guide
Shared libraries for libc++ should now be present in llvm/build/lib. Note that it is safest to use this from its current location rather than replacing your system‘s libc++ (if it has one, if not, go right ahead).
Mac users, remember to be careful when replacing the system‘s libc++. Your system will not be able to boot without a funcioning libc++.
Building libc++ with -fno-rtti is not supported. However linking against it with -fno-rtti is supported.
Send discussions to the clang mailing list.
To use your system-installed libc++ with clang you can:
clang++ -stdlib=libc++ test.cppclang++ -std=c++11 -stdlib=libc++ test.cppTo use your tip-of-trunk libc++ on Mac OS with clang you can:
export DYLD_LIBRARY_PATH=path/to/build/libclang++ -std=c++11 -stdlib=libc++ -nostdinc++ -I<path-to-libcxx>/include -L<path-to-libcxx>/lib test.cppYou will need to keep the source tree of libc++abi available on your build machine and your copy of the libc++abi shared library must be placed where your linker will find it.
Unfortunately you can‘t simply run clang with "-stdlib=libc++" at this point, as clang is set up to link for libc++ linked to libsupc++. To get around this you‘ll have to set up your linker yourself (or patch clang). For example:
clang++ -stdlib=libc++ helloworld.cpp -nodefaultlibs -lc++ -lc++abi -lm -lc -lgcc_s -lgccAlternately, you could just add libc++abi to your libraries list, which in most situations will give the same result:
clang++ -stdlib=libc++ helloworld.cpp -lc++abiIf you think you‘ve found a bug in libc++, please report it using the LLVM Bugzilla. If you‘re not sure, you can post a message to the cfe-dev mailing list or on IRC. Please include "libc++" in your subject.
If you want to contribute a patch to libc++, the best place for that is the cfe-commits mailing list. Please include "libc++" and "PATCH" in your subject.
You will need libstdc++ in order to provide libsupc++.
Figure out where the libsupc++ headers are on your system. On Ubuntu this is /usr/include/c++/<version> and /usr/include/c++/<version>/<target-triple>
You can also figure this out by running
$ echo | g++ -Wp,-v -x c++ - -fsyntax-only
ignoring nonexistent directory "/usr/local/include/x86_64-linux-gnu"
ignoring nonexistent directory "/usr/lib/gcc/x86_64-linux-gnu/4.7/../../../../x86_64-linux-gnu/include"
#include "..." search starts here:
#include <...> search starts here:
/usr/include/c++/4.7
/usr/include/c++/4.7/x86_64-linux-gnu
/usr/include/c++/4.7/backward
/usr/lib/gcc/x86_64-linux-gnu/4.7/include
/usr/local/include
/usr/lib/gcc/x86_64-linux-gnu/4.7/include-fixed
/usr/include/x86_64-linux-gnu
/usr/include
End of search list.
Note the first two entries happen to be what we are looking for. This may not be correct on other platforms.
We can now run CMake:
CC=clang CXX=clang++ cmake -G "Unix Makefiles" -DLIBCXX_CXX_ABI=libstdc++ -DLIBCXX_LIBSUPCXX_INCLUDE_PATHS="/usr/include/c++/4.7/;/usr/include/c++/4.7/x86_64-linux-gnu/" -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr <libc++-source-dir>-DLIBCXX_CXX_ABI=libsupc++ above, which will cause the library to be linked to libsupc++ instead of libstdc++, but this is only recommended if you know that you will never need to link against libstdc++ in the same executable as libc++. GCC ships libsupc++ separately but only as a static library. If a program also needs to link against libstdc++, it will provide its own copy of libsupc++ and this can lead to subtle problems.makesudo make installYou can now run clang with -stdlib=libc++.
You will need to keep the source tree of libcxxrt available on your build machine and your copy of the libcxxrt shared library must be placed where your linker will find it.
We can now run CMake:
CC=clang CXX=clang++ cmake -G "Unix Makefiles" -DLIBCXX_CXX_ABI=libcxxrt -DLIBCXX_LIBCXXRT_INCLUDE_PATHS="<libcxxrt-source-dir>/src" -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr <libc++-source-dir>makesudo make installUnfortunately you can‘t simply run clang with "-stdlib=libc++" at this point, as clang is set up to link for libc++ linked to libsupc++. To get around this you‘ll have to set up your linker yourself (or patch clang). For example,
clang++ -stdlib=libc++ helloworld.cpp -nodefaultlibs -lc++ -lcxxrt -lm -lc -lgcc_s -lgccAlternately, you could just add libcxxrt to your libraries list, which in most situations will give the same result:
clang++ -stdlib=libc++ helloworld.cpp -lcxxrt
Note: This is not recommended in almost all cases.
Generally these instructions should only be used when you can‘t install your ABI library.
Normally you must link libc++ against a ABI shared library that the linker can find. If you want to build and test libc++ against an ABI library not in the linker‘s path you need to set -DLIBCXX_CXX_ABI_LIBRARY_PATH=/path/to/abi/lib when configuring CMake.
An example build using libc++abi would look like:
CC=clang CXX=clang++ cmake -DLIBCXX_CXX_ABI=libc++abi -DLIBCXX_LIBCXXABI_INCLUDE_PATHS="/path/to/libcxxabi/include" -DLIBCXX_CXX_ABI_LIBRARY_PATH="/path/to/libcxxabi-build/lib" path/to/libcxxmake
When testing libc++ LIT will automatically link against the proper ABI library.
标签：des http ar io os sp for strong on
原文地址：http://www.cnblogs.com/ioriwellings/p/4166390.html
