实验环境：
CentOS release 6.6(Final) 1台
Windows XP 1台
IP地址：
172.16.31.8 http1.stu31.com web服务器端
172.16.31.188 Windows XP 测试客户端
WindowsXP 安装了chrom浏览器和系统自带的IE浏览器
软件版本：
httpd-2.4.9.tar.bz2
一.实验准备阶段:
程序开发包组安装
[root@http1 ~]# yum groupinstallDevelopment Tools [root@http1 ~]# yum groupinstall ServerPlatform Development
支持正则表达式包安装：
[root@http1 ~]# yum install -y pcre-devel
安装openssl的开发包：
[root@http1 ~]# yum install –yopenssl-devel
二.DNS搭建
安装bind
[root@http1 ~]# yum install bind
配置主配置文件：
[root@http1 ~]# cat /etc/named.conf
//
// named.conf
//
// Provided by Red Hat bind package toconfigure the ISC BIND named(8) DNS
// server as a caching only nameserver (asa localhost DNS resolver only).
//
// See /usr/share/doc/bind*/sample/ forexample named configuration files.
//
options {
// listen-on port 53 { 127.0.0.1; };
// listen-on-v6 port 53 { ::1; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
memstatistics-file "/var/named/data/named_mem_stats.txt";
// allow-query { localhost; };
recursion yes;
// dnssec-enable yes;
// dnssec-validation yes;
// dnssec-lookaside auto;
/* Path to ISC DLV key */
/*bindkeys-file "/etc/named.iscdlv.key";
managed-keys-directory "/var/named/dynamic";
*/
};
logging {
channel default_debug {
file"data/named.run";
severity dynamic;
};
};
zone "." IN {
type hint;
file "named.ca";
};
include"/etc/named.rfc1912.zones";
include "/etc/named.root.key";
配置主区域文件：
[root@http1 ~]# vim/etc/named.rfc1912.zones
zone "stu31.com" IN {
type master;
file "stu31.com.zone";
};
创建区域解析库文件：
[root@http1 ~]# cd /var/named [root@http1 named]# vim stu31.com.zone $TTL 600 $ORIGIN stu31.com. @ IN SOA ns1.stu31.com. admin.stu31.com. ( 2014121501 1H 5M 3D 6H) IN NS ns1.stu31.com. IN MX 5 mail ns1 IN A 172.16.31.8 www IN A 172.16.31.8 www1 IN A 172.16.31.8 mail IN A 172.16.31.8 pop3 IN CNAME mail iamp4 IN CNAME mail
区域文件语法检查：
[root@http1 named]# named-checkzonestu31.com stu31.com.zone zone stu31.com/IN: loaded serial 2014121501 OK
启动DNS服务：
[root@http1 named]# service named start Generating /etc/rndc.key: [ OK ] Starting named: [ OK ]
测试DNS服务器：
[root@http1 named]# dig -t SOA stu31.com@172.16.31.8 ; <<>> DiG9.8.2rc1-RedHat-9.8.2-0.30.rc1.el6 <<>> -t SOA stu31.com@172.16.31.8 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY,status: NOERROR, id: 5919 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1,AUTHORITY: 1, ADDITIONAL: 1 ;; QUESTION SECTION: ;stu31.com. IN SOA ;; ANSWER SECTION: stu31.com. 600 IN SOA ns1.stu31.com.admin.stu31.com. 2014121501 3600 300 259200 21600 ;; AUTHORITY SECTION: stu31.com. 600 IN NS ns1.stu31.com. ;; ADDITIONAL SECTION: ns1.stu31.com. 600 IN A 172.16.31.8 ;; Query time: 0 msec ;; SERVER: 172.16.31.8#53(172.16.31.8) ;; WHEN: Mon Dec 15 12:07:37 2014 ;; MSG SIZE rcvd: 103
三.源码安装httpd-2.4.9
1.获取源码程序包及依赖程序源码apr及apr-util
[root@http1 ~]# ls anaconda-ks.cfg apr-util-1.5.3.tar.bz2 install.log apr-1.5.0.tar.bz2 httpd-2.4.9.tar.bz2 install.log.syslog [root@http1 ~]# tar xf apr-1.5.0.tar.bz2
2.编译安装apr：
[root@http1 apr-1.5.0]# ./configure--prefix=/usr/local/apr [root@http1 apr-1.5.0]# make &&make install [root@http1 apr-1.5.0]# ls /usr/local/apr/ bin build-1 include lib
3.编译安装apr-util：
[root@http1 ~]# tar xfapr-util-1.5.3.tar.bz2
[root@http1 ~]# cd apr-util-1.5.3
需要告诉apr在哪里：
[root@http1 apr-util-1.5.3]# ./configure --prefix=/usr/local/apr-util--with-apr=/usr/local/apr [root@http1 apr-util-1.5.3]#make && make install
4.编译安装httpd-2.4.9：
httpd2.2已经安装了，需要卸载，不卸载就需要将httpd-2.4安装在独立目录：
解压源码包：
[root@http1 ~]# tar xf httpd-2.4.9.tar.bz2
[root@http1 ~]# cd httpd-2.4.9
查看帮助：
[root@http1 httpd-2.4.9]# ./configure--help |less
重要常用选项介绍：
支持DSO装载：--enable-so
支持ssl加密：--enable-ssl
支持通用网关接口：--enable-cgi
支持URL重写：--enable-rewrite
使用特定压缩库：--with-zlib
支持扩展正则表达式：--with-pcre
程序依赖包apr：--with-apr
程序依赖包arp-util：--with-apr-util
模块启用，启用大多数：--enable-modules=most
编译安装：
[root@http1 httpd-2.4.9]# ./configure--prefix=/usr/local/apache --sysconfdir=/etc/httpd24 --enable-so--enable-ssl --enable-cgi--enable-rewrite --with-zlib --with-pcre --with-apr=/usr/local/apr--with-apr-util=/usr/local/apr-util --enable-modules=most--enable-mpms-shared=all --with-mpm=prefork [root@http1 httpd-2.4.9]#make &&make install
[root@http1 apache]# vim/etc/profile.d/httpd24.sh export PATH=/usr/local/apache/bin:$PATH [root@http1 apache]# source/etc/profile.d/httpd24.sh [root@http1 httpd24]# echo $PATH /usr/local/apache/bin:/usr/lib64/qt-3.3/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin [root@http1 apache]# which apachectl /usr/local/apache/bin/apachectl
测试安装模块：
核心模块：
[root@http1 httpd-2.4.9]# httpd -l Compiled in modules: core.c mod_so.c http_core.c
全部模块：可以知道MPM模式已经动态模块化了。
[root@http1 httpd-2.4.9]# httpd -M Loaded Modules: core_module (static) so_module (static) http_module (static) authn_file_module (shared) authn_core_module (shared) authz_host_module (shared) authz_groupfile_module (shared) authz_user_module (shared) authz_core_module (shared) access_compat_module (shared) auth_basic_module (shared) reqtimeout_module (shared) filter_module (shared) mime_module (shared) log_config_module (shared) env_module (shared) headers_module (shared) setenvif_module (shared) version_module (shared) mpm_prefork_module (shared) unixd_module (shared) status_module (shared) autoindex_module (shared) dir_module (shared) alias_module (shared)
启动httpd服务：
[root@http1 ~]# apachectl start
查看服务监听端口：
[root@http1 ~]# ss -tnl |grep 80 LISTEN 0 128 :::80 :::*
5.配置一个简单的web网页测试:
[root@http1 ~]# vim /etc/httpd24/httpd.conf ServerRoot "/www/htdocs/" Pidfile"/var/run/httpd/httpd.pid" ServerName www.stu31.com:80 DocumentRoot "/www/htdocs" <Directory "/www/htdocs"> Options Indexes FollowSymLinks AllowOverride None Require all granted </Directory>
6.服务脚本创建：
[root@http1 ~]# cat/etc/rc.d/init.d/httpd24
#!/bin/bash
#
# httpd24 Startup script for the Apache HTTPServer
#
# chkconfig: - 85 15
# description: The Apache HTTP Server is anefficient and extensible # server implementing the currentHTTP standards.
# processname: httpd
# config: /etc/httpd/conf/httpd.conf
# config: /etc/sysconfig/httpd
# pidfile: /var/run/httpd/httpd.pid
#
### BEGIN INIT INFO
# Provides: httpd
# Required-Start: $local_fs $remote_fs$network $named
# Required-Stop: $local_fs $remote_fs$network
# Should-Start: distcache
# Short-Description: start and stop ApacheHTTP Server
# Description: The Apache HTTP Server is anextensible server
# implementing the current HTTP standards.
### END INIT INFO
# Source function library.
. /etc/rc.d/init.d/functions
#if [ -f /etc/sysconfig/httpd ]; then
# . /etc/sysconfig/httpd
#fi
# Start httpd in the C locale by default.
HTTPD_LANG=${HTTPD_LANG-"C"}
# This will prevent initlog from swallowingup a pass-phrase prompt if
# mod_ssl needs a pass-phrase from theuser.
INITLOG_ARGS=""
# Set HTTPD=/usr/sbin/httpd.worker in/etc/sysconfig/httpd to use a server
# with the thread-based "worker"MPM; BE WARNED that some modules may not
# work correctly with a thread-based MPM;notably PHP will refuse to start.
# Path to the apachectl script, serverbinary, and short-form for messages.
apachectl=/usr/local/apache/bin/apachectl
httpd=${HTTPD-/usr/local/apache/bin/httpd}
prog=httpd
pidfile=${PIDFILE-/var/run/httpd/httpd.pid}
lockfile=${LOCKFILE-/var/lock/subsys/httpd}
RETVAL=0
STOP_TIMEOUT=${STOP_TIMEOUT-10}
# The semantics of these two functions differfrom the way apachectl does
# things -- attempting to start whilerunning is a failure, and shutdown
# when not running is also a failure. So we just do it the way init scripts
# are expected to behave here.
start() {
echo -n $"Starting $prog: "
LANG=$HTTPD_LANG daemon --pidfile=${pidfile} $httpd $OPTIONS
RETVAL=$?
echo
[ $RETVAL = 0 ] && touch ${lockfile}
return $RETVAL
}
# When stopping httpd, a delay (of default10 second) is required
# before SIGKILLing the httpd parent; thisgives enough time for the
# httpd parent to SIGKILL any errantchildren.
stop() {
echo -n $"Stopping $prog: "
killproc -p ${pidfile} -d ${STOP_TIMEOUT} $httpd
RETVAL=$?
echo
[ $RETVAL = 0 ] && rm -f ${lockfile} ${pidfile}
}
reload() {
echo -n $"Reloading $prog: "
if ! LANG=$HTTPD_LANG $httpd $OPTIONS -t >&/dev/null; then
RETVAL=6
echo $"not reloading due to configuration syntax error"
failure $"not reloading $httpd due to configuration syntaxerror"
else
# Force LSB behaviour from killproc
LSB=1 killproc -p ${pidfile} $httpd -HUP
RETVAL=$?
if [ $RETVAL -eq 7 ]; then
failure $"httpd shutdown"
fi
fi
echo
}
# See how we were called.
case "$1" in
start)
start
;;
stop)
stop
;;
status)
status -p ${pidfile} $httpd
RETVAL=$?
;;
restart)
stop
start
;;
condrestart|try-restart)
if status -p ${pidfile} $httpd >&/dev/null; then
stop
start
fi
;;
force-reload|reload)
reload
;;
graceful|help|configtest|fullstatus)
$apachectl $@
RETVAL=$?
;;
*)
echo $"Usage: $prog{start|stop|restart|condrestart|try-restart|force-reload|reload|status|fullstatus|graceful|help|configtest}"
RETVAL=2
esac
exit $RETVAL
7.添加到启动项并启动服务
[root@http1 ~]# chkconfig --add httpd24 [root@http1 ~]# chkconfig httpd24 on [root@http1 ~]# service httpd24 start Starting httpd: [ OK ]
成功启动
四：基于IP的虚拟主机配置；
1.创建web网页存放目录：
[root@http1 ~]# mkdir /web/vhosts/www1 -pv mkdir: created directory `/web‘ mkdir: created directory `/web/vhosts‘ mkdir: created directory `/web/vhosts/www1‘
2.加入测试网页：
[root@http1 ~]# vim/web/vhosts/www1/index.html /web/vhosts/www1 172.16.31.8:80 [root@http1 ~]# mkdir /web/vhosts/www2 [root@http1 ~]# echo "access from192" > /web/vhosts/www2/index.html
3.修改httpd主配置文件
注释掉主服务器部分，开启虚拟主机
[root@http1 ~]# vim /etc/httpd24/httpd.conf ServerRoot "/usr/local/apache/" Pidfile"/var/run/httpd/httpd.pid" Listen 80 #ServerName www.stu31.com:80 #DocumentRoot "/www/htdocs" # Virtual hosts Include/etc/httpd24/extra/httpd-vhosts.conf
4.编辑基于IP的虚拟主机
[root@http1 ~]# vim/etc/httpd24/extra/httpd-vhosts.conf <VirtualHost 172.16.31.8:80> DocumentRoot "/web/vhosts/www1" ServerName www.stu31.com ErrorLog "/web/vhosts/www1/www1-error_log" CustomLog "/web/vhosts/www1/www1-access_log" common </VirtualHost> <Directory /web/vhosts/www1> Require all granted </Directory> <VirtualHost 192.168.31.8:80> DocumentRoot "/web/vhosts/www2" ServerName www.stu31.com ErrorLog "/web/vhosts/www2/www1-error_log" CustomLog "/web/vhosts/www2/www1-access_log" common </VirtualHost> <Directory /web/vhosts/www2> Require all granted </Directory>
5.添加一个ip地址，用于测试不同ip的返回结果：
[root@http1 ~]# ip addr add 192.168.31.8/24dev eth0 [root@http1 ~]# ip addr show eth0 2: eth0:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen1000 link/ether 08:00:27:7c:87:48 brd ff:ff:ff:ff:ff:ff inet 172.16.31.8/16 brd 172.16.255.255 scope global eth0 inet 192.168.31.8/24 scope global eth0 inet6 fe80::a00:27ff:fe7c:8748/64 scope link valid_lft forever preferred_lft forever
6.启动服务进行测试：
[root@http1 ~]# service httpd24restart Stopping httpd: [ OK ] Starting httpd: [ OK ] [root@http1 ~]# curl 192.168.31.8 access from 192 [root@http1 ~]# curl 172.16.31.8 /web/vhosts/www1 172.16.31.8:80
五.基于端口的虚拟主机搭建
1.编辑虚拟主机配置文件，添加端口，小小的修改一下：
[root@http1 ~]# vim/etc/httpd24/extra/httpd-vhosts.conf Listen 8080 <VirtualHost 172.16.31.8:80> DocumentRoot "/web/vhosts/www1" ServerName www.stu31.com ErrorLog "/web/vhosts/www1/www1-error_log" CustomLog "/web/vhosts/www1/www1-access_log" common </VirtualHost> <Directory /web/vhosts/www1> Require all granted </Directory> <VirtualHost 172.16.31.8:8080> DocumentRoot "/web/vhosts/www2" ServerName www.stu31.com ErrorLog "/web/vhosts/www2/www1-error_log" CustomLog "/web/vhosts/www2/www1-access_log" common </VirtualHost> <Directory /web/vhosts/www2> Require all granted </Directory>
2.重启服务测试
[root@http1 ~]# service httpd24restart Stopping httpd: [ OK ] Starting httpd: [ OK ] [root@http1 ~]# curl 172.16.31.8:80 /web/vhosts/www1 172.16.31.8:80 [root@http1 ~]# curl 172.16.31.8:8080 access from 192 [root@http1 ~]#
六.基于域名的虚拟主机
1.修改一下测试网页，以便分辨
[root@http1 ~]# cat/web/vhosts/www1/index.html /web/vhosts/www1 172.16.31.8:80 [root@http1 ~]# cat/web/vhosts/www2/index.html /web/vhost/www2 www1.stu31.com
2.在虚拟主机配置文件中定义
在httpd2.2版本定义基于域名的虚拟主机时，需要加入如下现象，在2.4则不再需要，直接定义即可
[root@http1 ~]# vim/etc/httpd24/extra/httpd-vhosts.conf <VirtualHost 172.16.31.8:80> DocumentRoot "/web/vhosts/www1" ServerName www.stu31.com ErrorLog "/web/vhosts/www1/www1-error_log" CustomLog "/web/vhosts/www1/www1-access_log" common </VirtualHost> <Directory /web/vhosts/www1> Require all granted </Directory> <VirtualHost 172.16.31.8:80> DocumentRoot "/web/vhosts/www2" ServerName www1.stu31.com ErrorLog "/web/vhosts/www2/www2-error_log" CustomLog "/web/vhosts/www2/www2-access_log" common </VirtualHost> <Directory /web/vhosts/www2> Require all granted </Directory>
3.重启服务测试
[root@http1 ~]# service httpd24restart Stopping httpd: [ OK ] Starting httpd: [ OK ] [root@http1 ~]# curl www.stu31.com /web/vhosts/www1 172.16.31.8:80 [root@http1 ~]# curl www1.stu31.com /web/vhost/www2 www1.stu31.com
六.用户访问控制实现
1.我们需要对www.stu31.com的状态信息网页进行用户访问控制：
查看编译有没有状态信息模块：
[root@http1 ~]# ls/usr/local/apache/modules/ |grep mod_status mod_status.so
2.我们需要在网页查看apache的状态信息，apache状态信息模块是默认开启的
[root@http1 ~]# vim /etc/httpd24/httpd.conf LoadModule status_modulemodules/mod_status.so
3. 编辑虚拟主机配置文件，修改第一个虚拟主机
[root@http1 ~]# vim/etc/httpd24/extra/httpd-vhosts.conf <VirtualHost 172.16.31.8:80> DocumentRoot "/web/vhosts/www1" ServerName www.stu31.com ErrorLog "/web/vhosts/www1/www1-error_log" CustomLog "/web/vhosts/www1/www1-access_log" common <Location /server-status> SetHandler server-status Authtype Basic Authname "status area" AuthUserFile /etc/httpd24/users/.htpasswd Require valid-user </Location> </VirtualHost>
4.创建配置文件中需要的用户控制认证文件
[root@http1 ~]# mkdir /etc/httpd24/users [root@http1 ~]# htpasswd -c -m/etc/httpd24/users/.htpasswd status New password: Re-type new password: Adding password for user status
5.重启服务进行测试
[root@http1 ~]# service httpd24 restart Stopping httpd: [ OK ] Starting httpd: [ OK ]
七.实现网站https加密传输
要求:我们针对www1.stu31.com实现https加密认证传输
1.mod_ssl模块的检查存在和装载
[root@http1 ~]# ls/usr/local/apache/modules/ |grep mod_ssl mod_ssl.so
2.构建私有CA服务器
[root@http1 ~]# cd /etc/pki/CA/
私钥文件建立：
[root@http1 CA]# (umask 077 ; opensslgenrsa -out private/cakey.pem 2048) Generating RSA private key, 2048 bit longmodulus ...............+++ .............................+++ e is 65537 (0x10001)
自签署证书构建：
[root@http1 CA]# openssl req -new -x509-key private/cakey.pem -out cacert.pem -days 3650 You are about to be asked to enter informationthat will be incorporated into your certificate request. What you are about to enter is what iscalled a Distinguished Name or a DN. There are quite a few fields but you canleave some blank For some fields there will be a defaultvalue, If you enter ‘.‘, the field will be leftblank. ----- Country Name (2 letter code) [XX]:CN State or Province Name (full name) []:HA Locality Name (eg, city) [Default City]:ZZ Organization Name (eg, company) [DefaultCompany Ltd]:stu31 Organizational Unit Name (eg, section)[]:ops Common Name (eg, your name or your server‘shostname) []:www1.stu31.com Email Address []:mail@stu31.com
CA服务器索引库构建：
[root@http1 CA]# touch index.txt
CA服务器序列号文件：
[root@http1 CA]# touch serial [root@http1 CA]# echo 01 >serial [root@http1 CA]# ls cacert.pem certs crl index.txt newcerts private serial
3.web服务器证书申请
[root@http1 CA]# mkdir /etc/httpd24/certs [root@http1 CA]# cd /etc/httpd24/certs
web服务器私钥生成：
[root@http1 certs]# (umask 077; opensslgenrsa -out httpd.key 2048) Generating RSA private key, 2048 bit longmodulus ...............+++ ............................................................+++ e is 65537 (0x10001)
web服务器证书请求生成：
[root@http1 certs]# openssl req -new -keyhttpd.key -out httpd.csr -days 3650 You are about to be asked to enterinformation that will be incorporated into your certificate request. What you are about to enter is what iscalled a Distinguished Name or a DN. There are quite a few fields but you canleave some blank For some fields there will be a defaultvalue, If you enter ‘.‘, the field will be leftblank. ----- Country Name (2 letter code) [XX]:CN State or Province Name (full name) []:HA Locality Name (eg, city) [Default City]:ZZ Organization Name (eg, company) [DefaultCompany Ltd]:stu31 Organizational Unit Name (eg, section)[]:ops Common Name (eg, your name or your server‘shostname) []:www1.stu31.com Email Address []:mail@stu31.com Please enter the following ‘extra‘attributes to be sent with your certificate request A challenge password []: An optional company name []:
4.CA服务器签署web服务器的证书
[root@http1 certs]# openssl ca -inhttpd.csr -out httpd.crt -days 3650 Using configuration from/etc/pki/tls/openssl.cnf Check that the request matches thesignature Signature ok Certificate Details: Serial Number: 1 (0x1) Validity Not Before: Dec 15 05:48:01 2014 GMT Not After : Dec 12 05:48:01 2024 GMT Subject: countryName = CN stateOrProvinceName = HA organizationName = stu31 organizationalUnitName = ops commonName =www1.stu31.com emailAddress =mail@stu31.com X509v3 extensions: X509v3 Basic Constraints: CA:FALSE Netscape Comment: OpenSSL Generated Certificate X509v3 Subject Key Identifier: C4:87:AD:7C:62:92:A1:DA:6D:40:BE:F8:4C:EC:2F:2E:71:9B:D7:35 X509v3 Authority Key Identifier: keyid:D9:4A:F1:A1:16:F2:5F:89:49:C5:0B:93:B5:B3:11:57:0A:DA:2F:54 Certificate is to be certified until Dec 1205:48:01 2024 GMT (3650 days) Sign the certificate? [y/n]:y 1 out of 1 certificate requests certified, commit?[y/n]y Write out database with 1 new entries Data Base Updated
5.httpd服务器开启https加密传输
修改主配置文件加载如下模块及开启httpd的ssl：
[root@http1 certs]# vim/etc/httpd24/httpd.conf LoadModule socache_shmcb_modulemodules/mod_socache_shmcb.so LoadModule ssl_module modules/mod_ssl.so # Secure (SSL/TLS) connections Include /etc/httpd24/extra/httpd-ssl.conf
配置ssl配置文件，开启https传输：
[root@http1 certs]# vim/etc/httpd24/extra/httpd-ssl.conf <VirtualHost 172.16.31.8:443> DocumentRoot "/web/vhosts/www2" ServerName www1.stu31.com:443 ServerAdmin mail@stu31.com ErrorLog"/usr/local/apache/logs/error_log" TransferLog"/usr/local/apache/logs/access_log" SSLEngine on SSLCertificateFile"/etc/httpd24/certs/httpd.crt" SSLCertificateKeyFile"/etc/httpd24/certs/httpd.key" </VirtualHost>
6.检查语法，重新启动httpd服务测试：
[root@http1 certs]# httpd -t Syntax OK [root@http1 certs]# service httpd restart Stopping httpd: [ OK ] Starting httpd: [ OK ]
将CA服务器的证书发送给客户端
客户端安装证书进行测试：
实验成功，整个源码编译安装apache httpd-2.4.9完成了！！！
本文出自 “龙之守护” 博客，请务必保留此出处http://sohudrgon.blog.51cto.com/3088108/1590841
源码安装httpd2.4及实现用户访问控制及https的实现
原文地址：http://sohudrgon.blog.51cto.com/3088108/1590841
