标签：pt-online-schema-change 在线修改表结构
一、测试环境
系统：Centos 6.2
数据库：mysql Ver 14.14 Distrib 5.5.18, for Linux (x86_64) using readline 5.1
percona工具：percona-toolkit-2.2.12
测试数据库大小：tx_ljxz_71--16G、t_log_item--3G
二、在线修改表结构的过程
mysql在线修改表结构
1 按照原始表（original_table）的表结构和DDL语句，新建一个不可见的临时表（tmp_table）
2 在原表上加write lock，阻塞所有更新操作（insert、delete、update等）
3 执行insert into tmp_table select * from original_table
4 rename original_table和tmp_table，最后drop original_table
5 释放 write lock。
我们可以看见在InnoDB执行DDL的时候，原表是只能读不能写的。
pt-online-schema-change在线修改表结构
1 创建一个和你要执行 alter 操作的表一样的空表结构。
2 执行表结构修改，然后从原表中的数据到copy到 表结构修改后的表，
3 在原表上创建触发器将 copy 数据的过程中，在原表的更新操作 更新到新表.
注意:如果表中已经定义了触发器这个工具就不能工作了。
4 copy 完成以后，用rename table 新表代替原表，默认删除原表。
三、安装配置percona-toolkit
1.安装
官网下载即可
tar zxvf percona-toolkit-2.2.12.tar.gz perl Makefile.PL make make test make install
2.测试安装成功
pt-online-schema-change -uroot --alter="modify buff_id int(20)" --dry-run D=tx_ljxz_71,t=t_world_buff
报错：
Cannot connect to MySQL: install_driver(mysql) failed: Attempt to reload DBD/mysql.pm aborted. Compilation failed in require at (eval 21) line 3. at /usr/local/bin/pt-online-schema-change line 2261
后在虚拟机上的centos 6.5上安装测试，没发现同样的问题，经检测，是定制系统的问题
/usr/local/lib64/perl5/Bundle/DBD/mysql.pm /usr/local/lib64/perl5/DBD/mysql.pm
要求perl-DBD-MySQL的安装目录在/usr/lib64/perl5/，将原来的目录移走，重新安装即可
mv /usr/local/lib64/perl5/ /data/backup/ yum install perl-DBD-MySQL
重测一次，返回
Operation, tries, wait: copy_rows, 10, 0.25 create_triggers, 10, 1 drop_triggers, 10, 1 swap_tables, 10, 1 update_foreign_keys, 10, 1 Starting a dry run. `tx_ljxz_71`.`t_world_buff` will not be altered. Specify --execute instead of --dry-run to alter the table. Creating new table... Created new table tx_ljxz_71._t_world_buff_new OK. Altering new table... Altered `tx_ljxz_71`.`_t_world_buff_new` OK. Not creating triggers because this is a dry run. Not copying rows because this is a dry run. Not swapping tables because this is a dry run. Not dropping old table because this is a dry run. Not dropping triggers because this is a dry run. 2015-01-28T17:00:22 Dropping new table... 2015-01-28T17:00:22 Dropped new table OK. Dry run complete. `tx_ljxz_71`.`t_world_buff` was not altered.
四、测试在线修改表结构
1.在线修改表结构的时间对比：
mysql在线修改表结构
time mysql -uroot tx_ljxz_71 -e "alter table t_log_item modify role_level int(20)"
| real 18m51.198s | real 18m17.492s | real 19m53.119s |
pt-online-schema-change在线修改表结构
time pt-online-schema-change --user=root --critical-load Threads_running=100 --alter="modify role_level int(20)" --execute D=tx_ljxz_71,t=t_log_item
--critical-load值默认的Threads_running为50，不修改会报错： Error copying rows from `tx_ljxz_71`.`t_log_item` to `tx_ljxz_71`.`_t_log_item_new`: Threads_running=51 exceeds its critical threshold 50
| real 18m56.473s | real 19m27.950s | real 18m58.556s |
此时，没有执行任何sql语句对数据库进行操作
2.在线修改表结构时对数据库进行增删查改
mysql在线修改表结构
time mysql -uroot tx_ljxz_71 -e "alter table t_log_item modify role_level int(20)"
执行测试脚本，发现除了select语句，其他语句无法继续执行直至表结构修改完毕再进行增删改的操作
pt-online-schema-change在线修改表结构
time pt-online-schema-change --user=root --critical-load Threads_running=100 --alter="modify role_level int(20)" --execute D=tx_ljxz_71,t=t_log_item
a.percona-toolkit默认的innodb_lock_wait_timeout为1，retries值为3，需要在mysql的配置文件中修改innodb_lock_wait_timeout值,如果innodb_lock_wait_timeout值不够大（隐患），在执行mysql语句的同时，复制数据表，会报错：
2015-02-03T16:22:48 Error copying rows from `tx_ljxz_71`.`t_log_item` to `tx_ljxz_71`.`_t_log_item_new`: 2015-02-03T16:22:48 DBD::mysql::st execute failed: Lock wait timeout exceeded; try restarting transaction [for Statement "INSERT LOW_PRIORITY IGNORE INTO `tx_ljxz_71`.`_t_log_item_new` (`pid`, `agent_id`, `server_id`, `role_id`, `role_level`, `action`, `item_id`, `amount`, `bag_amount`, `zero_dateline`, `year`, `month`, `day`, `equip_id`, `color`, `fineness`, `start_time`, `end_time`, `bind_type`, `super_unique_id`, `from`) SELECT `pid`, `agent_id`, `server_id`, `role_id`, `role_level`, `action`, `item_id`, `amount`, `bag_amount`, `zero_dateline`, `year`, `month`, `day`, `equip_id`, `color`, `fineness`, `start_time`, `end_time`, `bind_type`, `super_unique_id`, `from` FROM `tx_ljxz_71`.`t_log_item` FORCE INDEX(`PRIMARY`) WHERE ((`pid` >= ?)) AND ((`pid` <= ?)) LOCK IN SHARE MODE /*pt-online-schema-change 20031 copy nibble*/" with ParamValues: 0=‘13794706058943‘, 1=‘13794714479917‘] at /usr/local/bin/pt-online-schema-change line 10385.
b.在线修改表结构时，会优先执行sql语句，暂停表结构的修改，暂停的时间如果大于innodb_lock_wait_timeout值会报上面一个错误，暂停的时间小于执行sql语句的，则执行完sql语句后，继续修改表结构,完成修改表结构的时间与在这期间执行sql语句的时间挂钩
Altering `tx_ljxz_71`.`t_log_item`... Creating new table... Created new table tx_ljxz_71._t_log_item_new OK. Altering new table... Altered `tx_ljxz_71`.`_t_log_item_new` OK. 2015-02-03T16:25:31 Creating triggers... 2015-02-03T16:25:31 Created triggers OK. 2015-02-03T16:25:31 Copying approximately 14221411 rows... Copying `tx_ljxz_71`.`t_log_item`: 0% 01:01:13 remain Copying `tx_ljxz_71`.`t_log_item`: 1% 59:04 remain Pausing because Threads_running=33. Pausing because Threads_running=30. Copying `tx_ljxz_71`.`t_log_item`: 1% 01:57:15 remain Copying `tx_ljxz_71`.`t_log_item`: 5% 44:33 remain ...... 2015-02-03T16:40:48 Copied rows OK. 2015-02-03T16:40:48 Swapping tables... 2015-02-03T16:40:50 Swapped original and new tables OK. 2015-02-03T16:40:50 Dropping old table... 2015-02-03T16:40:59 Dropped old table `tx_ljxz_71`.`_t_log_item_old` OK. 2015-02-03T16:40:59 Dropping triggers... 2015-02-03T16:40:59 Dropped triggers OK. Successfully altered `tx_ljxz_71`.`t_log_item`.
c.在线修改表结构时，内存会飙高
top - 14:52:46 up 110 days, 23:13, 3 users, load average: 2.04, 2.07, 1.51 Tasks: 242 total, 1 running, 241 sleeping, 0 stopped, 0 zombie Cpu(s): 12.6%us, 0.7%sy, 0.0%ni, 84.6%id, 2.2%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 12179948k total, 11409720k used, 770228k free, 174448k buffers Swap: 12287992k total, 17084k used, 12270908k free, 6134552k cached
五、结论
在没有执行sql语句时，mysql在线修改表结构的时间与pt-online-schma-change的基本上相等，无大的差别
在线修改表结构的同时执行mysql语句，mysql直接修改的方式会先修改完表结构再执行sql语句，pt-online-schema-change方式会优先执行sql语句，再复制数据表，复制完毕后再把执行sql语句的结果更新到新表
pt-online-schema-change方式会占用较大的内存
测试脚本：
#!/usr/local/bin/python import threading from os import system from random import randint import time import MySQLdb MYSQL = "/usr/local/bin/mysql -uroot" cxn = MySQLdb.connect(host=‘localhost‘, user=‘root‘, port=3306, db=‘tx_ljxz_71‘) def run1(db): role_level = randint(40, 70) start_time = int(time.time()) system(‘%s %s -e "select count(*) from t_log_item where role_level=%s"‘ % (MYSQL, db, role_level)) print ‘%s select count(*) from t_log_item where role_level=%s use %d sec.‘ % (db, role_level, int(time.time()) - start_time) def run2(db): month = randint(9, 10) day = randint(20, 30) start_time = int(time.time()) system(‘%s %s -e "select sum(use_unbind) from t_log_consume_gold where year=2013 and month=%s and day=%s"‘ % (MYSQL, db, month, day)) print ‘%s select sum(use_unbind) from t_log_consume_gold where year=2013 and month=%s and day=%s use %d sec.‘ % (db, month, day, int(time.time()) - start_time) def run3(db): p_id = randint(139249095950, 139349095950) start_time = int(time.time()) try: system(‘%s %s -e "insert into t_log_item (pid) values(%s)"‘ % (MYSQL, db, p_id)) except: print "insert into t_log_item failed" else: print ‘%s insert into t_log_item (pid) values(%s) use %d sec.‘ % (db, p_id, int(time.time()) - start_time) def run4(db): role_level = randint(1, 15) start_time = int(time.time()) try: system(‘%s %s -e "delete from t_log_item where role_level=%s;commit"‘ % (MYSQL, db, role_level)) except: print "delte from t_log_item failed" else: print ‘%s delete from t_log_item where role_level=%s use %d sec.‘ % (db, role_level, int(time.time()) - start_time) def run5(db): role_level = randint(16, 20) server_id = randint(1, 100) start_time = int(time.time()) try: system(‘%s %s -e "update t_log_item set server_id=%s where role_level=%s;commit"‘ % (MYSQL, db, server_id, role_level)) """cxn.commint() cxn.close()""" except: print "update t_log_item failed" else: print ‘%s update t_log_item set server_id=%s where role_level=%s use %d sec.‘ % (db, server_id, role_level, int(time.time()) - start_time) if __name__ == ‘__main__‘: threads = [] funcs = [run1, run2, run3, run4, run5] dbs = [‘tx_ljxz_71‘, ‘tx_ljxz_71‘, ‘tx_ljxz_71‘,‘tx_ljxz_71‘, ‘tx_ljxz_71‘] for i in range(50): threads.append(threading.Thread(target=funcs[randint(0,4)], args=(dbs[randint(0,4)],))) for i in range(50): threads[i].start() for i in range(50): threads[i].join()
本文出自 “运维小卒” 博客，转载请与作者联系！
在线修改表结构mysql5.5版本和pt-online-schema-change
标签：pt-online-schema-change 在线修改表结构
原文地址：http://8721349.blog.51cto.com/8711349/1611203
