iscsi initiator
config ISCSI_TCP tristate "iSCSI Initiator over TCP/IP" depends on SCSI && INET select CRYPTO select CRYPTO_MD5 select CRYPTO_CRC32C select SCSI_ISCSI_ATTRS help The iSCSI Driver provides a host with the ability to access storage through an IP network. The driver uses the iSCSI protocol to transport SCSI requests and responses over a TCP/IP network between the host (the "initiator") and "targets". Architecturally, the iSCSI driver combines with the host‘s TCP/IP stack, network drivers, and Network Interface Card (NIC) to provide the same functions as a SCSI or a Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA). To compile this driver as a module, choose M here: the module will be called iscsi_tcp. The userspace component needed to initialize the driver, documentation, and sample configuration files can be found here:
obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o
config SCSI_ISCSI_ATTRS tristate "iSCSI Transport Attributes" depends on SCSI && NET select BLK_DEV_BSGLIB help If you wish to export transport-specific information about each attached iSCSI device to sysfs, say Y. Otherwise, say N. obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o
FC initiator
source "drivers/scsi/qla2xxx/Kconfig"
obj-$(CONFIG_SCSI_QLA_FC)+= qla2xxx/
config SCSI_DEBUG tristate "SCSI debugging host simulator" depends on SCSI select CRC_T10DIF help This is a host adapter simulator that can simulate multiple hosts each with multiple dummy SCSI devices (disks). It defaults to one host adapter with one dummy SCSI disk. Each dummy disk uses kernel RAM as storage (i.e. it is a ramdisk). To save space when multiple dummy disks are simulated, they share the same kernel RAM for their storage. See <http://sg.danny.cz/sg/sdebug26.html> for more information. This driver is primarily of use to those testing the SCSI and block subsystems. If unsure, say N. obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
source "drivers/scsi/device_handler/Kconfig"
config SCSI tristate "SCSI device support" depends on BLOCK select SCSI_DMA if HAS_DMA ---help--- If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or any other SCSI device under Linux, say Y and make sure that you know the name of your SCSI host adapter (the card inside your computer that "speaks" the SCSI protocol, also called SCSI controller), because you will be asked for it. You also need to say Y here if you have a device which speaks the SCSI protocol. Examples of this include the parallel port version of the IOMEGA ZIP drive, USB storage devices, Fibre Channel, and FireWire storage. To compile this driver as a module, choose M here and read <file:Documentation/scsi/scsi.txt>. The module will be called scsi_mod. However, do not compile this as a module if your root file system (the one containing the directory /) is located on a SCSI device. obj-$(CONFIG_SCSI) += scsi_mod.o scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o scsicam.o scsi_error.o scsi_lib.o scsi_mod-$(CONFIG_SCSI_DMA) += scsi_lib_dma.o scsi_mod-y += scsi_scan.o scsi_sysfs.o scsi_devinfo.o scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o scsi_mod-y += scsi_trace.o scsi_mod-$(CONFIG_PM) += scsi_pm.o
config SCSI_FC_ATTRS tristate "FiberChannel Transport Attributes" depends on SCSI select SCSI_NETLINK help If you wish to export transport-specific information about each attached FiberChannel device to sysfs, say Y. Otherwise, say N. obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o
config BLK_DEV_SD tristate "SCSI disk support" depends on SCSI select CRC_T10DIF if BLK_DEV_INTEGRITY ---help--- If you want to use SCSI hard disks, Fibre Channel disks, Serial ATA (SATA) or Parallel ATA (PATA) hard disks, USB storage or the SCSI or parallel port version of the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI CD-ROMs. To compile this driver as a module, choose M here and read <file:Documentation/scsi/scsi.txt>. The module will be called sd_mod. Do not compile this driver as a module if your root file system (the one containing the directory /) is located on a SCSI disk. In this case, do not compile the driver for your SCSI host adapter obj-$(CONFIG_BLK_DEV_SD) += sd_mod.o sd_mod-objs := sd.o sd_mod-$(CONFIG_BLK_DEV_INTEGRITY) += sd_dif.o config CHR_DEV_SG tristate "SCSI generic support" depends on SCSI ---help--- If you want to use SCSI scanners, synthesizers or CD-writers or just about anything having "SCSI" in its name other than hard disks, CD-ROMs or tapes, say Y here. These won‘t be supported by the kernel directly, so you need some additional software which knows how to talk to these devices using the SCSI protocol: For scanners, look at SANE (<http://www.sane-project.org/>). For CD writer software look at Cdrtools (<http://cdrecord.berlios.de/private/cdrecord.html>) and for burning a "disk at once": CDRDAO (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>). For other devices, it‘s possible that you‘ll have to write the driver software yourself. Please read the file <file:Documentation/scsi/scsi-generic.txt> for more information. To compile this driver as a module, choose M here and read <file:Documentation/scsi/scsi.txt>. The module will be called sg. If unsure, say N. obj-$(CONFIG_CHR_DEV_SG) += sg.o config SCSI_ENCLOSURE tristate "SCSI Enclosure Support" depends on SCSI && ENCLOSURE_SERVICES help Enclosures are devices sitting on or in SCSI backplanes that manage devices. If you have a disk cage, the chances are that it has an enclosure device. Selecting this option will just allow certain enclosure conditions to be reported and is not required. obj-$(CONFIG_SCSI_ENCLOSURE) += ses.o
===========================================================================================
SCSI Disk
sd.c sd_dif.c
obj-$(CONFIG_SCSI) += scsi_mod.o scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o scsicam.o scsi_error.o scsi_lib.o scsi_mod-$(CONFIG_SCSI_DMA) += scsi_lib_dma.o scsi_mod-y += scsi_scan.o scsi_sysfs.o scsi_devinfo.o scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o scsi_mod-y += scsi_trace.o scsi_mod-$(CONFIG_PM) += scsi_pm.o
sg.c
scsi_transport_fc.c
scsi_transport_iscsi.c
scsi_debug.c
FC Initiator Driver
obj-$(CONFIG_SCSI_QLA_FC)+= qla2xxx/
config SCSI_QLA_FC tristate "QLogic QLA2XXX Fibre Channel Support" depends on PCI && SCSI select SCSI_FC_ATTRS select FW_LOADER ---help--- This qla2xxx driver supports all QLogic Fibre Channel PCI and PCIe host adapters. By default, firmware for the ISP parts will be loaded via the Firmware Loader interface. ISP Firmware Filename ---------- ----------------- 21xx ql2100_fw.bin 22xx ql2200_fw.bin 2300, 2312, 6312 ql2300_fw.bin 2322, 6322 ql2322_fw.bin 24xx, 54xx ql2400_fw.bin 25xx ql2500_fw.bin Upon request, the driver caches the firmware image until the driver is unloaded. Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/ They are also included in the linux-firmware tree as well. qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o qla_dbg.o qla_sup.o qla_attr.o qla_mid.o qla_dfs.o qla_bsg.o qla_nx.o qla_mr.o qla_nx2.o qla_target.o obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx.o
ISCSI Initiator driver
obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o
原文地址：http://wangxuemin.blog.51cto.com/9889672/1612132
