标签：
（1）操作系统(系统上面要安装一些必备的开发工具(比如gcc等))
linux-82:/home/PlODBC # cat/etc/SuSE-release
SUSE Linux EnterpriseServer 11 (x86_64)
VERSION = 11
PATCHLEVEL = 1
（2）安装所需的软件包
greenplum-connectivity-4.3.0.0-build-2-SuSE10-x86_64.zip
--GP官网下载，GP的JDBC和ODBC驱动
DBI-1.631.tar.gz
--DBI是数据库的通用接口
DBD-ODBC-1.48.tar.gz
--DBD是相应数据库的驱动程序unixODBC-2.2.12-204.3.1.x86_64.rpm
--unixODBC的驱动管理器
（3）将上面的包上传到搭建环境的服务器上面，比如/home/PlODBC
（1） 解压greenplum-connectivity-4.3.0.0-build-2-SuSE10-x86_64.zip
unzipgreenplum-connectivity-4.3.0.0-build-2-SuSE10-x86_64.zip
（2） 执行解压后得到greenplum-connectivity-4.3.0.0-build-2-SuSE10-x86_64.bin可执行文件
linux-82:/home/PlODBC # ./greenplum-connectivity-4.3.0.0-build-2-SuSE10-x86_64.bin
********************************************************************
You must read and accept the EMCConnectivity license agreement
before installing
********************************************************************
SOFTWARE LICENSE ANDMAINTENANCE AGREEMENT
*** IMPORTANT INFORMATION - PLEASE READ CAREFULLY ***
ThisSoftware contains computer programs and other proprietary material and
information,the use of which is subject to and expressly conditioned upon
acceptanceof this Software License and Maintenance Agreement (the "Agreement").
ThisAgreement is a legally binding document between you (meaning the individual
person orthe entity that the individual represents that has obtained the
Softwarefor its internal productive use and not for outright resale) (the
"Customer")and EMC (which means (i) EMC Corporation, if Customer is located in
theUnited States; (ii) the local EMC sales subsidiary, if Customer is located
in acountry in which EMC Corporation has a local sales subsidiary; and (iii)
EMCInformation Systems International ("EISI"), if Customer is locatedoutside
theUnited States and in a country in which EMC Corporation does not have a
localsales subsidiary). Unless EMC agrees otherwise in writing, this Agreement
governsCustomer‘s use of the Software except to the extent all or any portion
of theSoftware is: (a) the subject of a separate written agreement; or (b)
governedby a third party licensor‘s terms and conditions. Capitalized terms
havemeaning stated in the Agreement.
IfCustomer does not have a currently enforceable, written and separately signed
softwarelicense agreement directly with EMC or the Distributor from whom
Customerobtained this Software, then by clicking on the "Agree" or"Accept" or
similarbutton at the end of this Agreement, or proceeding with the
********************************************************************
Do you accept the EMC Connectivity licenseagreement? [yes | no]
********************************************************************
yes ---------同意许可
********************************************************************
Providethe installation path for Greenplum Connectivity or press ENTER to
acceptthe default installation path:/usr/local/greenplum-connectivity-4.3.0.0-build-2
********************************************************************
********************************************************************
InstallGreenplum Connectivity into</usr/local/greenplum-connectivity-4.3.0.0-build-2>? [yes | no]
********************************************************************************
yes ----------------保持默认的安装路径，你也可以自由指定安装路径
********************************************************************
/usr/local/greenplum-connectivity-4.3.0.0-build-2does not exist.
Create/usr/local/greenplum-connectivity-4.3.0.0-build-2 ? [ yes | no ]
(Selectingno will exit the installer)
********************************************************************
yes ----------------创建安装目录
Extractingproduct to /usr/local/greenplum-connectivity-4.3.0.0-build-2
********************************************************************
Installationcomplete.
GreenplumConnectivity is installed in /usr/local/greenplum-connectivity-4.3.0.0-build-2
Greenplumdocumentation is available for download at http://powerlink.emc.com.
********************************************************************************
（3） 配置Greenplum DB数据库驱动
查看安装目录时，如下：
linux-82:/usr/local/greenplum-connectivity-4.3.0.0-build-2/drivers/odbc# ll
total 24
drwxr-xr-x 3 hadoop users 4096 2013-11-15 09:49 psqlodbc-08.02.0400
drwxr-xr-x 6 hadoop users 4096 2013-11-15 09:52 psqlodbc-08.02.0500
drwxr-xr-x 3 hadoop users 4096 2013-11-15 09:53 psqlodbc-08.03.0400
drwxr-xr-x 3 hadoop users 4096 2013-11-15 09:54 psqlodbc-08.04.0200
drwxr-xr-x 3 hadoop users 4096 2013-11-15 09:55 psqlodbc-09.00.0200
drwxr-xr-x 3 hadoop users 4096 2013-11-15 09:56psqlodbc-09.02.0100
我们会看到有好几个版本的驱动，我们可以选择psqlodbc-08.02.0500版本的，再查看如下目录：
linux-82:/usr/local/greenplum-connectivity-4.3.0.0-build-2/drivers/odbc/psqlodbc-08.02.0500# ll
total 48
drwxr-xr-x 3 hadoop users 4096 2013-11-15 09:51 datadirect-51sp2_64
drwxr-xr-x 3 hadoop users 4096 2013-11-15 09:51 datadirect-52_64
drwxr-xr-x 3 hadoop users 4096 2013-11-15 09:52 datadirect-53sp2_64
-r--r--r-- 1 hadoop users 25746 2013-11-15 09:50 license.txt
-r--r--r-- 1 hadoop users 1383 2013-11-15 09:50 readme.txt
drwxr-xr-x 4hadoop users 4096 2013-11-15 09:50unixodbc-2.2.12
同样我们可以看到驱动管理器。
鉴于GP基于Postgresql8.2版本，我们这里面选择驱动为psqlodbc-08.02.0500，驱动管理器选择为datadirect-52_64。
所以，我们修改greenplum_connectivity_path.sh文件中的内容：
GP_ODBC_DRIVER=psqlodbc-08.02.0500 --值与实际目录名称相同
GP_ODBC_DRIVER_MANAGER=datadirect-52_64 --值与实际目录名称相同
注：该文件默认权限位444，是不允许编辑的，你可以手动修改文件的权限，也可以修改整个安装目录的权限位755，如下：
chmod -R 755greenplum-connectivity-4.3.0.0-build-2
保存greenplum_connectivity_path.sh后，要记得source，使环境变量生效，如下：
source greenplum_connectivity_path.sh
（1） 直接安装RPM包
rpm -ivhunixODBC-2.2.12-204.3.1.x86_64.rpm
（2） 查看RPM包安装路径
linux-82:/home/PlODBC# rpm -ql unixODBC-2.2.12-204.3.1
/etc/unixODBC
/etc/unixODBC/ODBCDataSources
/etc/unixODBC/odbc.ini
/etc/unixODBC/odbcinst.ini
/usr/bin/dltest
/usr/bin/isql
/usr/bin/iusql
/usr/bin/odbc_config
/usr/bin/odbcinst
/usr/lib64/libboundparam.so.1
/usr/lib64/libboundparam.so.1.0.0
/usr/lib64/libgtrtst.so.1
/usr/lib64/libgtrtst.so.1.0.0
/usr/lib64/libodbc.so
/usr/lib64/libodbc.so.1
/usr/lib64/libodbc.so.1.0.0
/usr/lib64/libodbccr.so.1
/usr/lib64/libodbccr.so.1.0.0
/usr/lib64/libodbcinst.so
/usr/lib64/libodbcinst.so.1
/usr/lib64/libodbcinst.so.1.0.0
/usr/lib64/unixODBC
/usr/lib64/unixODBC/libesoobS.so
/usr/lib64/unixODBC/libesoobS.so.1
/usr/lib64/unixODBC/libesoobS.so.1.0.0
/usr/lib64/unixODBC/libmimerS.so
/usr/lib64/unixODBC/libmimerS.so.1
/usr/lib64/unixODBC/libmimerS.so.1.0.0
/usr/lib64/unixODBC/libnn.so
/usr/lib64/unixODBC/libnn.so.1
/usr/lib64/unixODBC/libnn.so.1.0.0
/usr/lib64/unixODBC/libodbcdrvcfg1S.so
/usr/lib64/unixODBC/libodbcdrvcfg1S.so.1
/usr/lib64/unixODBC/libodbcdrvcfg1S.so.1.0.0
/usr/lib64/unixODBC/libodbcdrvcfg2S.so
/usr/lib64/unixODBC/libodbcdrvcfg2S.so.1
/usr/lib64/unixODBC/libodbcdrvcfg2S.so.1.0.0
/usr/lib64/unixODBC/libodbcminiS.so
/usr/lib64/unixODBC/libodbcminiS.so.1
/usr/lib64/unixODBC/libodbcminiS.so.1.0.0
/usr/lib64/unixODBC/libodbcmyS.so
/usr/lib64/unixODBC/libodbcmyS.so.1
/usr/lib64/unixODBC/libodbcmyS.so.1.0.0
/usr/lib64/unixODBC/libodbcnnS.so
/usr/lib64/unixODBC/libodbcnnS.so.1
/usr/lib64/unixODBC/libodbcnnS.so.1.0.0
/usr/lib64/unixODBC/libodbcpsql.so
/usr/lib64/unixODBC/libodbcpsql.so.1
/usr/lib64/unixODBC/libodbcpsql.so.1.0.0
/usr/lib64/unixODBC/libodbcpsql.so.2
/usr/lib64/unixODBC/libodbcpsql.so.2.0.0
/usr/lib64/unixODBC/libodbcpsqlS.so
/usr/lib64/unixODBC/libodbcpsqlS.so.1
/usr/lib64/unixODBC/libodbcpsqlS.so.1.0.0
/usr/lib64/unixODBC/libodbctxtS.so
/usr/lib64/unixODBC/libodbctxtS.so.1
/usr/lib64/unixODBC/libodbctxtS.so.1.0.0
/usr/lib64/unixODBC/liboplodbcS.so
/usr/lib64/unixODBC/liboplodbcS.so.1
/usr/lib64/unixODBC/liboplodbcS.so.1.0.0
/usr/lib64/unixODBC/liboraodbcS.so
/usr/lib64/unixODBC/liboraodbcS.so.1
/usr/lib64/unixODBC/liboraodbcS.so.1.0.0
/usr/lib64/unixODBC/libsapdbS.so
/usr/lib64/unixODBC/libsapdbS.so.1
/usr/lib64/unixODBC/libsapdbS.so.1.0.0
/usr/lib64/unixODBC/libtdsS.so
/usr/lib64/unixODBC/libtdsS.so.1
/usr/lib64/unixODBC/libtdsS.so.1.0.0
/usr/lib64/unixODBC/libtemplate.so
/usr/lib64/unixODBC/libtemplate.so.1
/usr/lib64/unixODBC/libtemplate.so.1.0.0
/usr/share/doc/packages/unixODBC
/usr/share/doc/packages/unixODBC/AUTHORS
/usr/share/doc/packages/unixODBC/COPYING
/usr/share/doc/packages/unixODBC/ChangeLog
/usr/share/doc/packages/unixODBC/NEWS
/usr/share/doc/packages/unixODBC/README
/usr/share/doc/packages/unixODBC/README.GTK
/usr/share/doc/packages/unixODBC/README.SuSE
/usr/share/doc/packages/unixODBC/index.html
/usr/share/doc/packages/unixODBC/smallbook.gif
/usr/share/doc/packages/unixODBC/unixODBC.gif
可以可看到unixODBC配置文件位于/etc/unixODBC下面：
linux-82:/etc/unixODBC # ll /etc/unixODBC
total 4
drwxr-xr-x 2 root root 4096 2011-06-15 00:32 ODBCDataSources
-rw-r--r-- 1 root root 02011-06-15 00:32 odbc.ini
-rw-r--r-- 1 root root 02011-06-15 00:32 odbcinst.ini
（3） 编辑unixODBC的两个配置文件，如下：
linux-82:/etc/unixODBC # cat /etc/unixODBC/odbc.ini
[GreenplumDSN]
Driver =Greenplum ----值要和/etc/unixODBC/odbcinst.ini中名字一致
Trace = 1
Debug=1
Database = noas ----GP数据库名
Servername = 10.41.24.102 ----GP的IP地址
UserName = noas ----GP用户名
Password = noas ----GP用户密码
Port = 5432 ----GP访问端口号
ReadOnly = No
RowVersioning = No
DisallowPremature = No
ShowSystemTables = Yes
ShowOidColumn = No
FakeOidIndex = No
useDeclareFetch = 1
Fetch = 4096
UpdatableCursors = Yes
Protocol = 7.4-1
linux-82:/etc/unixODBC # cat /etc/unixODBC/odbcinst.ini
[Greenplum]
Description = PostgreSQL driver forGreenplum
Driver=/usr/local/greenplum-connectivity-4.3.0.0-build-2/drivers/odbc/psqlodbc-08.02.0500/unixodbc-2.2.12/psqlodbcw.so ------GP的ODBC驱动
UsageCount=1
FileUsage= 1
（4） 使用isql测试
linux-82:/etc/unixODBC # isql GreenplumDSN
+---------------------------------------+
| Connected! |
| |
| sql-statement |
| help [tablename] |
| quit |
| |
+---------------------------------------+
SQL> select user;
+-----------------------------------------------------------------+
| current_user |
+-----------------------------------------------------------------+
| noas |
+-----------------------------------------------------------------+
SQLRowCount returns -1
1 rows fetched
SQL>
注：如果你在执行isql时，出现如下情况：
linux-82:/etc/unixODBC # isql GreenplumDSN
[ISQL]ERROR: Could not SQLConnect
这个问题很大情况下是你没有source文件greenplum_connectivity_path.sh导致的，执行source greenplum_connectivity_path.sh文件后，再执行就OK了，最好的办法是将source该文件加入到系统环境变量中。
（1） 解压DBI安装包
linux-82:/home/PlODBC # tar -zxvfDBI-1.631.tar.gz
（2） 查看DBI解压的目录
进入解压的目录，可以查看到Perl模块的安装说明文件INSTALL，里面有段内容为：
perl Makefile.PL
make
make test
make test TEST_VERBOSE=1 (if any of the t/* tests fail)
make install (if the tests look okay)
Perl的模块安装，基本上都是这几个步骤，test的内容不做强求，但是建议执行。
（3） 执行DBI安装
linux-82:/home/PlODBC/DBI-1.631 # perlMakefile.PL
linux-82:/home/PlODBC/DBI-1.631 # make
linux-82:/home/PlODBC/DBI-1.631 #make install
（4） 测试DBI安装是否成功
linux-82:/home/PlODBC/DBI-1.631 # perl-e ‘use DBI 1.625;‘
如果没有访问信息，则说明安装成功。
（5） 解压DBD-ODBC安装包
linux-82:/home/PlODBC # tar -zxvfDBD-ODBC-1.48.tar.gz
（6） 执行DBD-ODBC安装
perl Makefile.PL
make
make install
（7） 测试DBD-ODBC安装是否成功
linux-82:/home/PlODBC # perl -e‘use DBD::ODBC;‘
如果没有访问信息，则说明安装成功。
查看DBI整个安装信息：
linux-82:/home/PlODBC # perl -MDBI -e‘DBI->installed_versions;‘
Perl : 5.010000 (x86_64-linux-thread-multi)
OS : linux (2.6.32)
DBI : 1.631
DBD::Sponge : 12.010003
DBD::Proxy : install_driver(Proxy) failed: Can‘tlocate RPC/PlClient.pm in @INC
DBD::ODBC : 1.48
DBD::Gofer : 0.015327
DBD::File : 0.42
DBD::ExampleP : 12.014311
DBD::DBM : 0.08
可以看到DBI和DBD-ODBC都已经安装好了。
注：在编译DBD-ODBC时，如果报如下的错误：
linux-82:/home/PlODBC/DBD-ODBC-1.48 # perlMakefile.PL
**********
Rememberto actually *READ* the README file!
Andre-read it if you have any problems.
**********
OSNAME: linux
LANG: en_US.UTF-8
ODBCHOME:
LD_LIBRARY_PATH: /usr/local/greenplum-connectivity-4.3.0.0-build-2/drivers/odbc/psqlodbc-08.02.0500/datadirect-52_64/:/usr/local/greenplum-connectivity-4.3.0.0-build-2/lib:/sybaseclient/IQ-16_0/lib64:
DBROOT:
WINDIR:
II_SYSTEM:
Perl: 5.010000
ExtUtils::MakeMaker: 6.56
Command line options:
u!= undef
w!= undef
e!= undef
g!= 0
x!= undef
o=s=
Your LANG environment variable is set to"en_US.UTF-8"
This is known to cause problems in someperl installations - even stopping
this Makefile.PL from running withouterrors. If you have problems please
try re-running with LANG unset or with theutf part of LANG removed.
You are using a Perl configured withthreading enabled.
Please read the warnings in DBI about this.
You should also be aware that onnon-Windows platforms ODBC drivers come
in two forms, thread-safe andnon-thread-safe drivers and you may need
to make sure you are using the right one.
Press return to continue... Looking for odbc_config in : nowhere
Looking for odbc_config in (PATH)/usr/local/greenplum-connectivity-4.3.0.0-build-2/bin:/sybaseclient/IQ-16_0/bin64:/sbin:/usr/sbin:/usr/local/sbin:/root/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin:/usr/local/freetds0.91/bin:/usr/bin:/sybaseclient/IQ-16_0/bin64:/home/hadoop/nodesetup/java/jdk1.6.0_29/bin:/sybaseclient/IQ-16_0/lib64
Found odbc_config (via odbc_config) version 2.2.12
odbc_config reports --prefix=/usr
odbc_config reports --include-prefix=/usr/include
odbc_config reports --lib-prefix=/usr/lib64
butcannot find header files sql.h,sqlext.h,sqltypes.h in that path so ignoring
NOTE: Have you installed the unixodbc-devpackage
Looking for iodbc-config in PATH /usr/local/greenplum-connectivity-4.3.0.0-build-2/bin:/sybaseclient/IQ-16_0/bin64:/sbin:/usr/sbin:/usr/local/sbin:/root/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin:/usr/local/freetds0.91/bin:/usr/bin:/sybaseclient/IQ-16_0/bin64:/home/hadoop/nodesetup/java/jdk1.6.0_29/bin:/sybaseclient/IQ-16_0/lib64
iodbc_config not found
odbc_config not found - ok, there are otherthings I can do
Still trying to guess ODBCHOME - lookingfor headers now
trying /usr/include
trying /usr/local/include
trying /usr/pkg/include
trying /usr/local/easysoft/unixODBC/include
I cannot find drivermanager header files. Perhaps you need to install the
unixodbc-dev package orthe iodbc-dev package
The DBD::ODBC moduleneeds to link with an ODBC ‘Driver Manager‘.
(The Driver Manager, inturn, needs one or more database specific ODBC
drivers. The DBD::ODBCmodule does _not_ include any ODBC drivers!)
You need to indicate where your ODBC DriverManager is installed.
You can do this by:
o setting the ODBCHOME environment variable
o running ‘perl Makefile.PL -o odbcdir‘
o adding path to odbc_config/iodbc_configto PATH
If you do not have an ODBC Driver Manageryou should try to get hold of
the unixODBC packages for your system orbuild it from source (see
http://www.unixodbc.org). If you installdriver manager packages you
need to include the "XXX-dev"package which includes the C header files.
上面的主要问题是没有设置如下变量导致的：
export ODBCHOME=/usr/local/unixODBC
export LD_LIBRARY_PATH=/usr/local/unixODBC/lib
但是我们安装的unixODBC是RPM形式的包，安装后的目录不满足要求，所以我们需要重新编译安装unixODBC：
解压unixODBC-2.3.2.tar.gz包并安装
tar -zxvf unixODBC-2.3.2.tar.gz
./configure --prefix=/usr/local/unixODBC
make
make install
unixODBC安装好之后，设置环境变量：
export ODBCHOME=/usr/local/unixODBC
export LD_LIBRARY_PATH=/usr/local/unixODBC/lib
然后再重新安装DBD-ODBC驱动，就可以成功安装了。
同时不要忘记，将之前配置的/etc/unixODBC/odbc.ini和/etc/unixODBC/odbcinst.ini文件都拷贝到/usr/local/unixODBC/etc目录下面，因为Perl脚本将/usr/local/unixODBC/etc这里获取GP的数据库配置驱动信息。
（1） 准备perl测试脚本，如下：
linux-82:/etc/unixODBC
#!/usr/bin/perl
####################################################################
# name:hellokitty.pl
#describe: 测试perl访问Greenplum数据库
####################################################################
use DBI;
usestrict;
usePOSIX;
#判断入参个数：dbname数据库名; dbuser 用户名; password 密码
unless(@ARGV == 3) {
die "Usage: $0 dbname dbuserpassword\n";
}
#接收传入的参数
my$dbname = $ARGV[0];
my$dbuser = $ARGV[1];
my$password =$ARGV[2];
my $sth;
my$col_num;
my @cols;
my@row_ary;
my $i;
my $dbh =DBI->connect("dbi:ODBC:$dbname",$dbuser,$password,
{AutoCommit => 0,
RaiseError => 0,
PrintError => 0,}
)
or die"Can‘t connect to Greenplum database: $DBI::errstr\n";
$sth =$dbh->prepare("select * from hello1");
$sth->execute();
# Thenumber of columns
$col_num= $sth->{NUM_OF_FIELDS};
# outputcolumns
@cols = @{$sth->{NAME}};
printjoin("\t",@cols),"\n";
while (@row_ary = $sth->fetchrow_array ) {
for($i=0; $i<$col_num; $i++){
my $len = length $cols[$i] ;
printf "%-${len}s\t",$row_ary[$i];
}
print "\n";
}
$sth->finish;
$dbh->disconnect();
exit 0;
（2） 测试过程：
linux-82:/etc/unixODBC # perl hellokitty.plGreenplumDSN noas noas
id name
2 hello2
1 hello1
3 hello3
标签：
原文地址：http://blog.csdn.net/jiangshouzhuang/article/details/27485991
