码迷,mamicode.com
首页 > 系统相关 > 详细

linux之dd在扩增swap分区时的应用

时间:2015-02-28 11:36:17      阅读:188      评论:0      收藏:0      [点我收藏+]

标签:linux-swap

一、

linux中swap分区的基础作用:

    linux swap分区是linux交换分区:linux系统物理内存不够用时,系统会自动启用swap分区,来缓解物理内存的压力,系统把物理内存里的访问频率低的内存对象移动到swap分区中,再在物理内存里产生新的连接指向swap分区中的特定的对象;

二、

    相对于繁忙的服务器来说,会出现物理内存和物理分区同时不够用的情况,这时候我们就需要临时扩增swap分区的大小,达到这种目的有两种方法:

    1.当硬盘的扩展分区还有剩余的内存可用,可以用fdisk命令创建新的分区,并调整分区类型为linux-swap,然后启用即可。

    具体步骤:

            

[root@bogon ~]# free -m  //查看物理内存和swap分区的使用率

             total       used       free     shared    buffers     cached

Mem:           502        474         28          0         76        274

-/+ buffers/cache:        124        378

Swap:         1019          0       1019

[root@bogon ~]# fdisk /dev/sdb


The number of cylinders for this disk is set to 2610.

There is nothing wrong with that, but this is larger than 1024,

and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from other OSs

   (e.g., DOS FDISK, OS/2 FDISK)


Command (m for help): p //列出当前已创建的分区


Disk /dev/sdb: 21.4 GB, 21474836480 bytes

255 heads, 63 sectors/track, 2610 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes


   Device Boot      Start         End      Blocks   Id  System


Command (m for help): n   //新建一个分区

Command action

   e   extended

   p   primary partition (1-4)

p  //主分区

Partition number (1-4): 1

First cylinder (1-2610, default 1): 

Using default value 1

Last cylinder or +size or +sizeM or +sizeK (1-2610, default 2610): +3G

Command (m for help): t  //改变分区类型

Selected partition 1

Hex code (type L to list codes): L //列出内核所支持的分区


 0  Empty           1e  Hidden W95 FAT1 80  Old Minix       bf  Solaris        

 1  FAT12           24  NEC DOS         81  Minix / old Lin c1  DRDOS/sec (FAT-

 2  XENIX root      39  Plan 9          82  Linux swap / So c4  DRDOS/sec (FAT-

 3  XENIX usr       3c  PartitionMagic  83  Linux           c6  DRDOS/sec (FAT-

 4  FAT16 <32M      40  Venix 80286     84  OS/2 hidden C:  c7  Syrinx         

 5  Extended        41  PPC PReP Boot   85  Linux extended  da  Non-FS data 

 6  FAT16           42  SFS             86  NTFS volume set db  CP/M / CTOS / .

 7  HPFS/NTFS       4d  QNX4.x          87  NTFS volume set de  Dell Utility   

 8  AIX             4e  QNX4.x 2nd part 88  Linux plaintext df  BootIt         

 9  AIX bootable    4f  QNX4.x 3rd part 8e  Linux LVM       e1  DOS access     

 a  OS/2 Boot Manag 50  OnTrack DM      93  Amoeba          e3  DOS R/O        

 b  W95 FAT32       51  OnTrack DM6 Aux 94  Amoeba BBT      e4  SpeedStor      

 c  W95 FAT32 (LBA) 52  CP/M            9f  BSD/OS          eb  BeOS fs        

 e  W95 FAT16 (LBA) 53  OnTrack DM6 Aux a0  IBM Thinkpad hi ee  EFI GPT        

 f  W95 Ext‘d (LBA) 54  OnTrackDM6      a5  FreeBSD         ef  EFI (FAT-12/16/

10  OPUS            55  EZ-Drive        a6  OpenBSD         f0  Linux/PA-RISC b

11  Hidden FAT12    56  Golden Bow      a7  NeXTSTEP        f1  SpeedStor      

12  Compaq diagnost 5c  Priam Edisk     a8  Darwin UFS      f4  SpeedStor      

14  Hidden FAT16 <3 61  SpeedStor       a9  NetBSD          f2  DOS secondary  

16  Hidden FAT16    63  GNU HURD or Sys ab  Darwin boot     fb  VMware VMFS    

17  Hidden HPFS/NTF 64  Novell Netware  b7  BSDI fs         fc  VMware VMKCORE 

18  AST SmartSleep  65  Novell Netware  b8  BSDI swap       fd  Linux raid auto

1b  Hidden W95 FAT3 70  DiskSecure Mult bb  Boot Wizard hid fe  LANstep        

1c  Hidden W95 FAT3 75  PC/IX           be  Solaris boot    ff  BBT            

Hex code (type L to list codes): 82

Changed system type of partition 1 to 82 (Linux swap / Solaris)


Command (m for help): w //保存分区

The partition table has been altered!


Calling ioctl() to re-read partition table.


WARNING: Re-reading the partition table failed with error 16: Device or resource busy.

The kernel still uses the old table.

The new table will be used at the next reboot.

Syncing disks.


[root@bogon ~]# partprobe /dev/sdb //让内核重读分区表

[root@bogon ~]# cat /proc/partitions //确保内核重读分区表完成

major minor  #blocks  name


   8     0   20971520 sda

   8     1     305203 sda1

   8     2   19615365 sda2

   8     3    1044225 sda3

   8    16   20971520 sdb

   8    17    2939863 sdb1

[root@bogon ~]#mkswap /dev/sdb1 //格式化

Setting up swapspace version 1, size = 3010412 kB

[root@bogon ~]# swapon /dev/sdb1 //启用该swap分区

[root@bogon ~]# free -m

             total       used       free     shared    buffers     cached

Mem:           502        394        107          0         30        273

-/+ buffers/cache:         90        412

Swap:         3890          0       3890


[root@bogon ~]# swapoff /dev/sdb1 //关闭该swap分区

[root@bogon ~]# free -m

             total       used       free     shared    buffers     cached

Mem:           502        393        108          0         30        273

-/+ buffers/cache:         89        413

Swap:         1019          0       1019


2.当硬盘没有剩余的存储可创建新分区时,可以利用dd命令在已存的分区中创建一个文件,充当swap分区。

    具体步骤:(现已脚本的形式呈现)

[root@bogon ~]# vi createswap.sh

#!/bin/bash

echo -n "Please input your number:   "

read number

echo -n "Please input your swapfile name and the whole path:   "

read path

dd if=/dev/zero of=$path bs=1M count=$number

mkswap $path

swapon $path

free -m

echo "The swap created"


结束语:到此教程完毕。

linux之dd在扩增swap分区时的应用

标签:linux-swap

原文地址:http://7706173.blog.51cto.com/7696173/1615871

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!