OCM 11g升级考试第二场搭建DataGuard遇到： prod - Physical standby database (disabled) 错误

时间：2015-02-28 21:41:21 阅读：1389 评论：0 收藏：0 [点我收藏+]

标签：

转载请注明出处：http://blog.csdn.net/guoyjoe/article/details/43989607

1、**************************DGMGRL

DGMGRL> show configuration;

Configuration - c1

Protection Mode: MaxPerformance
Databases:
    orcl - Primary database
    prod - Physical standby database (disabled)

Fast-Start Failover: DISABLED

Configuration Status:
SUCCESS

DGMGRL> show database verbose orcl;

Database - orcl

Role:            PRIMARY
Intended State: TRANSPORT-ON
Instance(s):
    orcl

Properties:
    DGConnectIdentifier             = ‘orcl‘
    ObserverConnectIdentifier       = ‘‘
    LogXptMode                      = ‘ASYNC‘
    DelayMins                       = ‘0‘
    Binding                         = ‘optional‘
    MaxFailure                      = ‘0‘
    MaxConnections                  = ‘1‘
    ReopenSecs                      = ‘300‘
    NetTimeout                      = ‘30‘
    RedoCompression                 = ‘DISABLE‘
    LogShipping                     = ‘ON‘
    PreferredApplyInstance          = ‘‘
    ApplyInstanceTimeout            = ‘0‘
    ApplyParallel                   = ‘AUTO‘
    StandbyFileManagement           = ‘AUTO‘
    ArchiveLagTarget                = ‘0‘
    LogArchiveMaxProcesses          = ‘4‘
    LogArchiveMinSucceedDest        = ‘1‘
    DbFileNameConvert               = ‘/data/oradata/prod/, /data/oradata/orcl/‘
    LogFileNameConvert              = ‘/data/oradata/prod/, /data/oradata/orcl/‘
    FastStartFailoverTarget         = ‘‘
    StatusReport                    = ‘(monitor)‘
    InconsistentProperties          = ‘(monitor)‘
    InconsistentLogXptProps         = ‘(monitor)‘
    SendQEntries                    = ‘(monitor)‘
    LogXptStatus                    = ‘(monitor)‘
    RecvQEntries                    = ‘(monitor)‘
    HostName                        = ‘oracle2‘
    SidName                         = ‘orcl‘
    StaticConnectIdentifier         = ‘(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle2)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl_DGMGRL)(INSTANCE_NAME=orcl)(SERVER=DEDICATED)))‘
    StandbyArchiveLocation          = ‘/data/oracle/product/11.2.0/db_1/archive‘
    AlternateLocation               = ‘‘
    LogArchiveTrace                 = ‘0‘
    LogArchiveFormat                = ‘%t_%s_%r.dbf‘
    TopWaitEvents                   = ‘(monitor)‘

Database Status:
SUCCESS

DGMGRL> show database verbose prod;

Database - prod

Role:            PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag:   (unknown)
Apply Lag:       (unknown)
Real Time Query: OFF
Instance(s):
    prod

Properties:
    DGConnectIdentifier             = ‘prod‘
    ObserverConnectIdentifier       = ‘‘
    LogXptMode                      = ‘ASYNC‘
    DelayMins                       = ‘0‘
    Binding                         = ‘OPTIONAL‘
    MaxFailure                      = ‘0‘
    MaxConnections                  = ‘1‘
    ReopenSecs                      = ‘300‘
    NetTimeout                      = ‘30‘
    RedoCompression                 = ‘DISABLE‘
    LogShipping                     = ‘ON‘
    PreferredApplyInstance          = ‘‘
    ApplyInstanceTimeout            = ‘0‘
    ApplyParallel                   = ‘AUTO‘
    StandbyFileManagement           = ‘AUTO‘
    ArchiveLagTarget                = ‘0‘
    LogArchiveMaxProcesses          = ‘4‘
    LogArchiveMinSucceedDest        = ‘1‘
    DbFileNameConvert               = ‘/data/oradata/orcl/, /data/oradata/prod/‘
    LogFileNameConvert              = ‘/data/oradata/orcl/, /data/oradata/prod/‘
    FastStartFailoverTarget         = ‘‘
    StatusReport                    = ‘(monitor)‘
    InconsistentProperties          = ‘(monitor)‘
    InconsistentLogXptProps         = ‘(monitor)‘
    SendQEntries                    = ‘(monitor)‘
    LogXptStatus                    = ‘(monitor)‘
    RecvQEntries                    = ‘(monitor)‘
    HostName                        = ‘oracle3‘
    SidName                         = ‘prod‘
    StaticConnectIdentifier         = ‘(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle3)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=PROD_DGMGRL)(INSTANCE_NAME=prod)(SERVER=DEDICATED)))‘
    StandbyArchiveLocation          = ‘/data/oracle/product/11.2.0/db_1/archive‘
    AlternateLocation               = ‘‘
    LogArchiveTrace                 = ‘0‘
    LogArchiveFormat                = ‘%t_%s_%r.dbf‘
    TopWaitEvents                   = ‘(monitor)‘

Database Status:
DISABLED

DGMGRL> ENABLE DATABASE PROD;

DGMGRL> show configuration;

Configuration - c1

Protection Mode: MaxPerformance
Databases:
    orcl - Primary database
    prod - Physical standby database
      Error: ORA-16766: Redo Apply is stopped

Fast-Start Failover: DISABLED

Configuration Status:
ERROR

2、********************主库
SQL> select dest_id,error from v$archive_dest;

   DEST_ID ERROR
---------- -----------------------------------------------------------------
   1
   2
   3
   4
   5
   6
   7
   8
   9
   10
   11

   DEST_ID ERROR
---------- -----------------------------------------------------------------
   12
   13
   14
   15
   16
   17
   18
   19
   20
   21
   22

   DEST_ID ERROR
---------- -----------------------------------------------------------------
   23
   24
   25
   26
   27
   28
   29
   30
   31

31 rows selected.

SQL> select sequence#,applied from v$archived_log;

SEQUENCE# APPLIED
---------- ---------
   5 YES
   6 YES
   7 YES
   8 YES
   9 YES
   10 YES
   11 YES
   12 YES
   13 YES
   14 YES
   15 YES

SEQUENCE# APPLIED
---------- ---------
   16 YES
   17 YES
   18 YES
   19 YES
   20 YES
   21 YES
   22 YES
   23 YES
   24 YES
   25 YES
   26 YES

SEQUENCE# APPLIED
---------- ---------
   27 YES
   28 YES
   28 YES
   27 YES
   29 YES
   29 YES
   30 YES
   30 YES
   31 YES
   31 YES
   32 YES

SEQUENCE# APPLIED
---------- ---------
   32 YES
   33 YES
   33 YES
   34 YES
   34 YES
   35 YES
   35 YES
   36 YES
   36 YES
   37 YES
   37 YES

SEQUENCE# APPLIED
---------- ---------
   38 YES
   38 YES
   39 YES
   39 YES
   41 YES
   40 YES
   42 YES
   43 YES
   44 YES
   45 YES
   46 YES

SEQUENCE# APPLIED
---------- ---------
   47 NO
   48 NO
   49 NO
   49 YES
   47 YES
   50 NO
   48 YES
   50 YES
   51 YES
   51 NO
   52 NO

SEQUENCE# APPLIED
---------- ---------
   53 NO
   53 YES
   52 YES
   54 NO
   54 NO
   55 NO
   55 NO
   56 NO
   56 NO

75 rows selected.

3、****************************备库
SQL> select database_role,open_mode from v$database;

DATABASE_ROLE   OPEN_MODE
---------------- --------------------
PHYSICAL STANDBY READ ONLY

SQL> select sequence#,status from v$standby_log;

SEQUENCE# STATUS
---------- ----------
   57 ACTIVE
   0 UNASSIGNED
   0 UNASSIGNED
   0 UNASSIGNED

SQL> select process,status from v$managed_standby;

PROCESS   STATUS
--------- ------------
ARCH      CONNECTED
ARCH      CONNECTED
ARCH      CONNECTED
ARCH      CLOSING
RFS      IDLE
RFS      IDLE

6 rows selected.

备库被禁用了 prod - Physical standby database (disabled),但可以PHYSICAL STANDBY READ ONLY

分析并解决：

1、查防火墙
vi /etc/seLinux/config
service iptables stop
chkconfig iptables off
chkconfig --list iptables

2、检查参数

*.log_archive_dest_1=‘location="/u01/app/oracle/oradata/PROD1/archive"‘,‘MANDATORY valid_for=(ALL_LOGFILES,ALL_ROLES)‘

*.log_archive_dest_2=‘service="sbdb1"‘,‘   LGWR ASYNC NOAFFIRM delay=0 OPTIONAL compression=DISABLE max_failure=0 max_connections=1   reopen=300 db_unique_name="sbdb1" net_timeout=30 valid_for=(online_logfile,primary_role)‘

dg_config=(SBDB1,prod1)

fal_client=sbdb1
fal_server=prod1

SQL> alter database open read only;
alter database open read only
*
ERROR at line 1:
ORA-10458: standby database requires recovery
ORA-01196: file 1 is inconsistent due to a failed media recovery session
ORA-01110: data file 1: ‘/data/oradata/prod/system01.dbf‘

Completed standby crash recovery.
Errors in file /data/oracle/diag/rdbms/prod/prod/trace/prod_ora_13021.trc:
ORA-10458: standby database requires recovery
ORA-01196: file 1 is inconsistent due to a failed media recovery session
ORA-01110: data file 1: ‘/data/oradata/prod/system01.dbf‘
ORA-10458 signalled during: alter database open read only...
Tue Jan 04 17:59:34 2011
Data Guard: Database open failed; restarting redo-apply ...
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE THROUGH ALL SWITCHOVER DISCONNECT USING CURRENT LOGFILE
Attempt to start background Managed Standby Recovery process (prod)
Tue Jan 04 17:59:34 2011
MRP0 started with pid=32, OS id=13081
MRP0: Background Managed Standby Recovery process started (prod)
Serial Media Recovery started
Managed Standby Recovery starting Real Time Apply
Warning: Datafile 1 (/data/oradata/prod/system01.dbf) is infinitely media recovery fuzzy
Standby database will not open with this datafile online!
Warning: Datafile 2 (/data/oradata/prod/sysaux01.dbf) is infinitely media recovery fuzzy
Standby database will not open with this datafile online!
Warning: Datafile 3 (/data/oradata/prod/undotbs01.dbf) is infinitely media recovery fuzzy
Standby database will not open with this datafile online!
Warning: Datafile 4 (/data/oradata/prod/users01.dbf) is infinitely media recovery fuzzy
Standby database will not open with this datafile online!
Warning: Datafile 5 (/data/oradata/prod/haha.dbf) is infinitely media recovery fuzzy
Standby database will not open with this datafile online!
Waiting for all non-current ORLs to be archived...
All non-current ORLs have been archived.
Media Recovery Waiting for thread 1 sequence 82 (in transit)
Recovery of Online Redo Log: Thread 1 Group 4 Seq 82 Reading mem 0
Mem# 0: /data/oradata/prod/redo04.log
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE THROUGH ALL SWITCHOVER DISCONNECT USING CURRENT LOGFILE

SQL> shutdown abort;
ORACLE instance shut down.
SQL> startup nomount;
ORACLE instance started.

Total System Global Area 1068937216 bytes
Fixed Size                  2220200 bytes
Variable Size             624955224 bytes
Database Buffers          436207616 bytes
Redo Buffers                5554176 bytes

DGMGRL> remove database prod;
Warning: ORA-16620: one or more databases could not be reached for a delete operation

Removed database "prod" from the configuration
DGMGRL> remove database orcl;
Primary database cannot be removed
DGMGRL> remove configuration;
Removed configuration
DGMGRL>

SQL> alter system set dg_broker_start=false;

System altered.

SQL> shutdown abort;
ORACLE instance shut down.
SQL> startup nomount;
ORACLE instance started.

Total System Global Area 1068937216 bytes
Fixed Size                  2220200 bytes
Variable Size             624955224 bytes
Database Buffers          436207616 bytes
Redo Buffers                5554176 bytes

SQL> alter system set dg_broker_start=false;

System altered.

SQL> shutdown immediate;

SQL>Database closed.
SQL>Database dismounted.
SQL>ORACLE instance shut down.
SQL> startup
ORACLE instance started.

Total System Global Area 1068937216 bytes
Fixed Size                  2220200 bytes
Variable Size             624955224 bytes
Database Buffers          436207616 bytes
Redo Buffers                5554176 bytes
Database mounted.
Database opened.
SQL> alter system switch logfile;

System altered.

SQL> /

System altered.

SQL> /

System altered.

SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.

Total System Global Area 1068937216 bytes
Fixed Size                  2220200 bytes
Variable Size             624955224 bytes
Database Buffers          436207616 bytes
Redo Buffers                5554176 bytes
Database mounted.
Database opened.
SQL>

删除BROKER:
(1) REMOVE DATABASE PROD1
(2) REMOVE DATABASE SBDB1
(3) REMOVE CONFIGURATION
(4)ALTER SYSTEM SET DG_BROKER_START=FALSE;
(5)shutdown immediate;
(6)startup
(7)alter system switch logfile;
    /
   /
(8)duplicate target database for standby from active database;
(9)recover managed standby database using current logfile disconnect from session;
(10) 开始配broker
       create
       add
       enable

   (11) shutdown immediate;
        startup open read only;

   (12)startup mount;
       alter database flashback on;
   (13) alter database open;

OCM 11g升级考试第二场搭建DataGuard遇到： prod - Physical standby database (disabled) 错误

标签：

原文地址：http://blog.csdn.net/guoyjoe/article/details/43989607

踩

(0)

评论一句话评论（0）

分享档案

更多>

2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)

周排行