码迷,mamicode.com
首页 > 系统相关 > 详细

BLE获取iphone mac地址的方法--【sky原创】

时间:2015-03-06 00:54:46      阅读:1710      评论:0      收藏:0      [点我收藏+]

标签:

本人用的BLE是TIcc2541,1.3.2协议栈

1、首先要说明的是,iphone手机将信息保护了,BLE设备读到的iphone地址是随机的,每次连接都会不同

2、下面我就具体说明如何查看手机的mac地址

首先我的程序是作为从机的,从机配好开始广播,事件SBP_START_DEVICE_EVT ---> GAPRole_StartDevice( &simpleBLEPeripheral_PeripheralCBs );

然后进入peripheral.c中的GAPRole_ProcessEvent函数(关于回调函数我就不提了),

由事件SYS_EVENT_MSG --->gapRole_ProcessOSALMsg( (osal_event_hdr_t *)pMsg );  

---> GAP_MSG_EVENT ---> gapRole_ProcessGAPMsg( (gapEventHdr_t *)pMsg );

---> GAP_LINK_ESTABLISHED_EVENT ---> 

#define GAP_LINK_ESTABLISHED_EVENT            0x05

//!< Sent when the Establish Link Request is complete. This event is sent as an OSAL message defined as gapEstLinkReqEvent_t.

uint8 devAddr[B_ADDR_LEN]; //!< Device address of link

 

typedef struct
{
osal_event_hdr_t hdr; //!< GAP_MSG_EVENT and status
uint8 opcode; //!< GAP_LINK_ESTABLISHED_EVENT
uint8 devAddrType; //!< Device address type: @ref GAP_ADDR_TYPE_DEFINES
uint8 devAddr[B_ADDR_LEN]; //!< Device address of link
uint16 connectionHandle; //!< Connection Handle from controller used to ref the device
uint16 connInterval; //!< Connection Interval
uint16 connLatency; //!< Conenction Latency
uint16 connTimeout; //!< Connection Timeout
uint8 clockAccuracy; //!< Clock Accuracy
} gapEstLinkReqEvent_t;

 

gapEstLinkReqEvent_t *pPkt = (gapEstLinkReqEvent_t *)pMsg;
DEBUG_PRINT("address: %s(%d)\r\n", bdAddr2Str(pPkt->devAddr), __LINE__);

此时address就是你手机蓝牙的mac地址了,安卓和ios都可以,亲测

 

欢迎交流,如有转载请注明出处

新浪博客:http://blog.sina.com.cn/u/2049150530
博客园:http://www.cnblogs.com/sky-heaven/
知乎:http://www.zhihu.com/people/zhang-bing-hua

BLE获取iphone mac地址的方法--【sky原创】

标签:

原文地址:http://www.cnblogs.com/sky-heaven/p/4317034.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!