标签：
openstack API部分(Keystone) HAProxy配置
廖杰
一、概况与原理
1）所需要的配置组件有：pacemaker+corosync+HAProxy
2）主要原理：HAProxy作为负载均衡器，将对openstack api服务的请求分发到两个镜像的控制节点上，由于openstack api服务是无状态的服务，所以不存在数据同步的问题。具体为在pacemaker中配置一个VIP，HAProxy负责监听这个VIP，将对这个VIP的请求分发到两台控制节点上，同时HAProxy本身作为pacemaker的资源实现高可用性。另外，需在openstack中修改API服务的endpoint为VIP，同时对于服务的调用地址改为VIP。
3)目前只配置了keystone部分，其他部分情况类似。
（以下为具体配置步骤）
二、安装与配置HAProxy
1、调整内核参数,允许绑定VIP:
vim /etc/sysctl.conf
【内容】
net.ipv4.ip_nonlocal_bind=1
sysctl -p
2、安装HAProxy:
【源码安装】
wget -c http://haproxy.1wt.eu/download/1.4/src/haproxy-1.4.23.tar.gz
【备用链接：http://down1.chinaunix.net/distfiles/haproxy-1.4.21.tar.gz】
tar zxvf haproxy-1.4.23.tar.gz
cd haproxy-1.4.23
make TARGET=linux26 #如果是32位机器,则make TARGET=linux26 ARCH=i386
make install
mkdir -p /etc/haproxy
cp examples/haproxy.cfg /etc/haproxy/haproxy.cfg【可以跳过】
【yum安装】
yum install haproxy
3、配置HAProxy:
vim /etc/haproxy/haproxy.cfg
【内容】
global
daemon
defaults
mode http
maxconn 10000
timeout connect 10s
timeout client 10s
timeout server 10s
frontend keystone-admin-vip
bind 10.10.102.45:35357
default_backend keystone-admin-api
frontend keystone-public-vip
bind 10.10.102.45:5000
default_backend keystone-public-api
frontend quantum-vip
bind 10.10.102.45:9696
default_backend quantum-api
frontend glance-vip
bind 10.10.102.45:9191
default_backend glance-api
frontend glance-registry-vip
bind 10.10.102.45:9292
default_backend glance-registry-api
frontend nova-ec2-vip
bind 10.10.102.45:8773
default_backend nova-ec2-api
frontend nova-compute-vip
bind 10.10.102.45:8774
default_backend nova-compute-api
frontend nova-metadata-vip
bind 10.10.102.45:8775
default_backend nova-metadata-api
frontend cinder-vip
bind 10.10.102.45:8776
default_backend cinder-api
backend keystone-admin-api
balance roundrobin
server mesa-virt-01 10.10.102.6:35357 check inter 10s
server mesa-virt-02 10.10.102.7:35357 check inter 10s
backend keystone-public-api
balance roundrobin
server mesa-virt-01 10.10.102.6:5000 check inter 10s
server mesa-virt-02 10.10.102.7:5000 check inter 10s
backend quantum-api
balance roundrobin
server mesa-virt-01 10.10.102.6:9696 check inter 10s
server mesa-virt-02 10.10.102.7:9696 check inter 10s
backend glance-api
balance roundrobin
server mesa-virt-01 10.10.102.6:9191 check inter 10s
server mesa-virt-02 10.10.102.7:9191 check inter 10s
backend glance-registry-api
balance roundrobin
server mesa-virt-01 10.10.102.6:9292 check inter 10s
server mesa-virt-02 10.10.102.7:9292 check inter 10s
backend nova-ec2-api
balance roundrobin
server mesa-virt-01 10.10.102.6:8773 check inter 10s
server mesa-virt-02 10.10.102.7:8773 check inter 10s
backend nova-compute-api
balance roundrobin
server mesa-virt-01 10.10.102.6:8774 check inter 10s
server mesa-virt-02 10.10.102.7:8774 check inter 10s
backend nova-metadata-api
balance roundrobin
server mesa-virt-01 10.10.102.6:8775 check inter 10s
server mesa-virt-02 10.10.102.7:8775 check inter 10s
backend cinder-api
balance roundrobin
server mesa-virt-01 10.10.102.6:8776 check inter 10s
server mesa-virt-02 10.10.102.7:8776 check inter 10s
4、HAProxy的启动管理脚本:
vim /etc/init.d/haproxy
【内容】
# cat /etc/init.d/haproxy
#!/bin/bash
#
# chkconfig: 2345 85 15
# description: HA-Proxy is a TCP/HTTP reverse proxy which is particularly suited \
# for high availability environments.
# processname: haproxy
# config: /etc/haproxy.cfg
# pidfile: /var/run/haproxy.pid
# Source function library.
if [ -f /etc/init.d/functions ]; then
. /etc/init.d/functions
elif [ -f /etc/rc.d/init.d/functions ] ; then
. /etc/rc.d/init.d/functions
else
exit 0
fi
CONF_FILE="/etc/haproxy/haproxy.cfg"
HAPROXY_BINARY="/usr/local/sbin/haproxy"
PID_FILE="/var/run/haproxy.pid"
# Source networking configuration.
. /etc/sysconfig/network
# Check that networking is up.
[ ${NETWORKING} = "no" ] && exit 0
[ -f ${CONF_FILE} ] || exit 1
RETVAL=0
start() {
$HAPROXY_BINARY -c -q -f $CONF_FILE
if [ $? -ne 0 ]; then
echo "Errors found in configuration file."
return 1
fi
echo -n "Starting HAproxy: "
daemon $HAPROXY_BINARY -D -f $CONF_FILE -p $PID_FILE
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/haproxy
return $RETVAL
}
stop() {
echo -n "Shutting down HAproxy: "
killproc haproxy -USR1
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/haproxy
[ $RETVAL -eq 0 ] && rm -f $PID_FILE
return $RETVAL
}
restart() {
$HAPROXY_BINARY -c -q -f $CONF_FILE
if [ $? -ne 0 ]; then
echo "Errors found in configuration file, check it with ‘haproxy check‘."
return 1
fi
stop
start
}
check() {
$HAPROXY_BINARY -c -q -V -f $CONF_FILE
}
rhstatus() {
pid=$(pidof haproxy)
if [ -z "$pid" ]; then
echo "HAProxy is stopped."
exit 3
fi
status haproxy
}
condrestart() {
[ -e /var/lock/subsys/haproxy ] && restart || :
}
# See how we were called.
case "$1" in
start)
start
;;
stop)
stop
;;
restart)
restart
;;
reload)
restart
;;
condrestart)
condrestart
;;
status)
rhstatus
;;
check)
check
;;
*)
echo $"Usage: haproxy {start|stop|restart|reload|condrestart|status|check}"
RETVAL=1
esac
exit $RETVAL
5、检查HAProxy的配置是否正确:
# /etc/init.d/haproxy check
Configuration file is valid
【可能要经过如下处理：】
1). 【问题】
etc/init.d/haproxy check
-bash: /etc/init.d/haproxy: Permission denied
【解决】
cd /etc/init.d
chmod a+x haproxy
2). 【问题】
/etc/init.d/haproxy check
/etc/init.d/haproxy: line 70: /usr/local/bin/haproxy: No such file or directory
【解决】
cp /usr/local/sbin/haproxy /usr/local/bin/
三、Pacemaker + CoroSync安装和配置
【Pacemaker+Corosync+crmsh安装略】
1、先定义一些资源属性约束(包括禁止STONITH错误,忽略Quorum,防止资源在恢复之后移动等):
# crm configure
property stonith-enabled=false
property no-quorum-policy=ignore
rsc_defaults resource-stickiness=100
rsc_defaults failure-timeout=0
rsc_defaults migration-threshold=10
2、配置VIP资源:
crm(live)configure#
primitive api-vip ocf:heartbeat:IPaddr2 params ip=10.10.102.45 cidr_netmask=24 op monitor interval=5s
3、配置HAProxy资源:
crm(live)configure#
primitive haproxy lsb:haproxy op monitor interval="5s"
4、定义运行的HAProxy和VIP必须在同一节点上:
crm(live)configure#
colocation haproxy-with-vip INFINITY: haproxy api-vip
5、定义先接管VIP之后才启动HAProxy:
crm(live)configure#
order haproxy-after-IP mandatory: api-vip haproxy
6、验证并提交配置:
crm(live)configure# verify
crm(live)configure# commit
crm(live)configure# quit
7、资源状态查看
查看资源状态:
crm_mon -1 【可能有问题】
或
crm status
在机器1上查看:
/etc/init.d/haproxy status
haproxy (pid 1629) is running...
ip addr show eth0
2: eth0: mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 08:00:27:67:ab:7e brd ff:ff:ff:ff:ff:ff
inet 10.10.102.6/24 brd 192.168.1.255 scope global eth0
inet 10.10.102.45/24 brd 192.168.1.255 scope global secondary eth0【此处会显示虚拟ip】
inet6 fe80::a00:27ff:fe67:ab7e/64 scope link
valid_lft forever preferred_lft forever
在机器2上查看:
/etc/init.d/haproxy status
HAProxy is stopped.
ip addr show eth0
2: eth0: mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 08:00:27:67:ab:7e brd ff:ff:ff:ff:ff:ff
inet 10.10.102.7/24 brd 192.168.1.255 scope global eth0
inet6 fe80::a00:27ff:fe67:ab7e/64 scope link tentative dadfailed
valid_lft forever preferred_lft forever
从上面的这些信息,可以知道VIP绑定在机器1上,同时只有机器1上的HAProxy已经启动.
8、Failover测试
在pacemaker中standby正在运行资源的机器，观察集群资源在两台机器中间的转移。
【用到的命令】
crm node standby 机器名
crm status
crm node online 机器名
四、以keystone为例配置API服务
1、/etc/keystone/keystone.conf配置【如果是其他API服务应该修改认证地址，不修改绑定地址】
【貌似无需修改，都绑定监听自己的物理ip】
2、service endpoint配置【在一台机器上修改就行了，由于此时mysql已经实现HA，所以在任意一台机器上修改endpoint对两台机器都是全局有效的】
1) 以当前admin身份登录keystone
2）创建绑定vip的endpoint
keystone service-list
【记住service-list中keystone的service-id】
keystone endpoint-create --region RegionOne \
--service-id $(keystone service-list | awk ‘/ keystone / {print $2}‘) \
--publicurl "http://10.10.102.45:5000/v2.0" \
--internalurl "http://10.10.102.45:5000/v2.0" \
--adminurl http://10.10.102.45:35357/v2.0
【10.10.102.45为vip】
3）删除旧的endpoint
keystone endpoint-list
【记住旧的endpoint的id号】
keystone endpoint-delete 21a7b25a08d74882a711f09f0c313170
4）重启服务
service openstack-keystone restart
5）验证
export OS_AUTH_URL=http://10.10.102.45:35357/v2.0/
【10.10.102.45为vip】
keystone user-list（正常）
五、测试与验证：
由于API服务没有作为pacemaker的资源，所以必须在两台机器中的一台上手动停掉API服务，然后在其他机器上用VIP登录API服务
【例如，用到的命令如下】
service openstack-keystone stop
service openstack-keystone status
参考网站：
http://openstack.redhat.com/Load_Balance_OpenStack_API#HAProxy
http://openstack.redhat.com/RDO_HighlyAvailable_and_LoadBalanced_Control_Services 【附带Mysql和Qpid的HA配置】
openstack API部分(Keystone) HAProxy配置（二）
标签：
原文地址：http://www.cnblogs.com/littlebugfish/p/4321730.html
