码迷,mamicode.com
首页 > 系统相关 > 详细

Ubuntu下升级VisualBox后无法启动 Kernel driver not installed (rc=-1908)

时间:2015-03-14 21:28:19      阅读:252      评论:0      收藏:0      [点我收藏+]

标签:

Ubuntu下升级VisualBox后无法启动 Kernel driver not installed (rc=-1908)

 

VisualBox之所以在Linux上比传统的VMware快得多,关键一点就是它和Linux内核的结合比较紧密,这也是开源的优点。

不过Linux内核更新很频繁,每次更新内核后启动VirtualBox都会提示:

VirtualBox kernel driver not installed. The vboxdrv kernel module was either not loaded or /dev/vboxdrv was not created for some reason. Re-setup the kernel module by executing ‘/etc/init.d/vboxdrv setup’ as root.

所以需要重新编译VirtualBox的内核,Ubuntu下执行如下命令:

sudo /etc/init.d/vboxdrv setup

如果提示

 

* Stopping VirtualBox kernel modules                                                                                                                                                                  [ OK ] 
* Uninstalling old VirtualBox DKMS kernel modules                                                                                                                                             [ OK ] 
* Trying to register the VirtualBox kernel modules using DKMS 
* Failed, trying without DKMS
* Recompiling VirtualBox kernel modules 
* Look at /var/log/vbox-install.log to find out what went wrong

 

找到/var/log/vbox-install.log文件,内容大致为:

Makefile:172: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR= and run Make again.  Stop.

所以需要安装当前Linux内核的源文件,编译VirtualBox内核的时候需要它,Ubuntu下执行如下命令安装当前Linux内核的源文件:

sudo apt-get install linux-headers-`uname -r`

注意括起uname -r的不是单引号,而是Esc键下面的那个符号。


然后再编译VirtualBox内核执行如下命令:

sudo /etc/init.d/vboxdrv setup

Ubuntu下升级VisualBox后无法启动 Kernel driver not installed (rc=-1908)

标签:

原文地址:http://www.cnblogs.com/swek/p/4338151.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!