码迷,mamicode.com
首页 > 数据库 > 详细

SQLServer 数据加密解密(一)

时间:2015-04-04 12:18:12      阅读:307      评论:0      收藏:0      [点我收藏+]

标签:

都是基本示例,更多参考官方文档:

1. Transact-SQL 函数
2. 数据库密钥
3. 证书
4. 非对称密钥
5. 对称密钥


--	drop table EnryptTest
create table EnryptTest
(
	id int not null primary key,
	EnryptData nvarchar(20),
)

insert into EnryptTest
values(1,N'888888'),(2,N'888888'),(3,N'123456'),(4,N'A');


select * from EnryptTest;

【Transact-SQL 函数加密】

/***********************************【Transact-SQL 函数加密】********************************/
--	使用 TRIPLE DES 算法(128 密钥位长度)的通行短语加密数据。


--	添加测试列
alter table EnryptTest add PassPhrase varbinary(256)
alter table EnryptTest add PassPhrase2 varbinary(256)--用于验证器验证


--	加密(EncryptByPassPhrase)
--	https://technet.microsoft.com/zh-cn/library/ms190357%28v=sql.105%29.aspx?f=255&MSPPError=-2147217396
update EnryptTest set PassPhrase = EncryptByPassPhrase('Hello.kk',EnryptData)
go

update EnryptTest 
set PassPhrase2 = EncryptByPassPhrase
	(
	  'Hello.kk'			--用于生成对称密钥的通行短语
	, EnryptData			--要加密的明文
	, 1						--指示是否将验证器与明文一起加密。如果将添加验证器,则为 1
	, convert(varbinary,id)	--用于派生验证器的数据(如 主键)
	)
go

--	解密(DecryptByPassPhrase)
--	https://technet.microsoft.com/zh-cn/library/ms188910%28v=sql.105%29.aspx?f=255&MSPPError=-2147217396

select convert(nvarchar,DecryptByPassphrase('Hello.kk',PassPhrase)) from EnryptTest;
go

select convert(nvarchar,DecryptByPassphrase(
	  'Hello.kk'	--生成解密密钥的通行短语
	, PassPhrase2	--要解密的加密文本varbinary 
	, 1				--添加验证器
	, convert(varbinary,id)))--验证器为主键
from EnryptTest;
go


--附:未用验证器的,数据并不安全
--如:把所有id的密码都改为与A一样,其他密码的解密与A一样,别人就有可能登录其他账号
update EnryptTest set PassPhrase = (select PassPhrase from EnryptTest where id=4)
go
select id,EnryptData,convert(nvarchar,DecryptByPassphrase('Hello.kk',PassPhrase)) 
from EnryptTest;


--	删除测试列
alter table EnryptTest drop column PassPhrase 
alter table EnryptTest drop column PassPhrase2
go

【数据库主密钥】

/***************************************【数据库主密钥】***********************************/

select * from sys.key_encryptions
select * from sys.crypt_properties

--	创建数据库主密钥
--	https://technet.microsoft.com/zh-cn/library/ms174382(v=sql.105).aspx
create master key encryption by password = N'Hello@MyMasterKey' --必须符合Windows密码策略要求
go

--	打开当前数据库的数据库主密钥
--	https://technet.microsoft.com/zh-cn/library/ms186336(v=sql.105).aspx
open master key decryption by password = N'Hello@MyMasterKey'
go

--	更改数据库主密钥的属性
--	https://technet.microsoft.com/zh-cn/library/ms186937(v=sql.105).aspx
alter master key regenerate with encryption by password = N'Hello@MyMasterKey'

alter master key add encryption by password = N'Hello@kk'
alter master key drop encryption by password = N'Hello@kk'

alter master key add encryption by service master key
alter master key drop encryption by service master key

--	导出数据库主密钥
--	https://technet.microsoft.com/zh-cn/library/ms174387(v=sql.105).aspx
backup master key 
to file = N'D:\XXDB_MasterKey' 
encryption by password = N'Hello@MyMasterKey'
go

--	从备份文件中导入数据库主密钥
--	https://technet.microsoft.com/zh-cn/library/ms186336(v=sql.105).aspx
restore master key 
	from file = N'D:\XXDB_MasterKey'
    decryption by password = N'Hello@MyMasterKey'
    encryption by password = N'Hello@MyMasterKey' --New Password
go

--	从当前数据库中删除主密钥
--	https://technet.microsoft.com/zh-cn/library/ms180071(v=sql.105).aspx
drop master key
go

【证书】

/*****************************************【证书】*************************************/
--	证书和非对称密钥使用数据库级的内部公钥加密数据,并且使用数据库级内部私钥解密数据
--	当使用数据库主密钥对私钥进行加密时,不需要 ENCRYPTION BY PASSWORD 选项。私钥使用数据库主密钥进行加密
--(有点难理解,最后给出例子)

select * from sys.key_encryptions
select * from sys.crypt_properties
select * from sys.certificates

select * from EnryptTest

--	添加测试列
alter table EnryptTest add CertificateCol varbinary(max)
go

--	创建证书
--	https://technet.microsoft.com/zh-cn/library/ms187798%28v=sql.105%29.aspx?f=255&MSPPError=-2147217396
create certificate Mycertificate
encryption by password = N'Hello@Mycertificate'	--加密密码
with subject = N'EnryptData certificate',		--证书描述  
start_date = N'20150401',	--证书生效日 
expiry_date = N'20160401';	--证书到期日  
go

--	使用证书的公钥加密数据
--	https://msdn.microsoft.com/zh-cn/library/ms188061(v=sql.105).aspx
update EnryptTest 
set CertificateCol = EncryptByCert(CERT_ID('Mycertificate'),CONVERT(VARCHAR(MAX),EnryptData))
go

--	用证书的私钥解密数据
--	https://msdn.microsoft.com/zh-cn/library/ms178601(v=sql.105).aspx
select *,CONVERT(VARCHAR(MAX ),DECRYPTBYCERT(CERT_ID('Mycertificate'),CertificateCol,N'Hello@Mycertificate'))
from EnryptTest;
go

--	修改私钥密码 
--	https://msdn.microsoft.com/zh-cn/library/ms189511(v=sql.105).aspx
alter certificate mycertificate 
with private key (
	decryption by password = N'Hello@Mycertificate', 
	encryption by password = N'Hello@Mycertificate')
go

--	从证书中删除私钥 
alter certificate mycertificate remove private key
go

--	备份证书
--	https://msdn.microsoft.com/zh-cn/library/ms178578(v=sql.105).aspx
backup certificate mycertificate 
to file = N'D:\mycertificate.cer' --用于加密的证书备份路径
with private key ( 
	file = N'D:\mycertificate_saleskey.pvk' , --用于解密证书私钥文件路径 
	decryption by password = N'Hello@Mycertificate' ,--对私钥进行解密的密码
	encryption by password = N'Hello@Mycertificate' );--对私钥进行加密的密码
go

--	创建/还原证书
create certificate mycertificate 
from file = N'D:\mycertificate.cer' 
with private key (
    file = N'D:\mycertificate_saleskey.pvk', 
    decryption by password = 'Hello@Mycertificate');
go

--	删除对称密钥
--	https://msdn.microsoft.com/zh-cn/library/ms182698(v=sql.105).aspx
drop certificate  Mycertificate;
go

--	删除测试列
alter table EnryptTest drop column CertificateCol;
go

【非对称密钥】

/***************************************【非对称密钥】*************************************/
--	默认情况下,私钥受数据库主密钥保护

select * from sys.key_encryptions
select * from sys.crypt_properties
select * from sys.certificates
select * from sys.asymmetric_keys
select * from sys.openkeys

select * from EnryptTest

--	添加测试列
alter table EnryptTest add AsymmetricCol varbinary(max)
go

--	创建非对称密钥
--	https://msdn.microsoft.com/zh-cn/library/ms174430(v=sql.105).aspx
create asymmetric key MyAsymmetric 
with 
	algorithm=rsa_512 
	encryption by password='Hello@MyAsymmetric';
go  

--	加密(EncryptByAsymKey)
--	https://msdn.microsoft.com/ZH-CN/library/ms186950(v=sql.105).aspx
update EnryptTest 
set AsymmetricCol = EncryptByAsymKey(asymkey_id ('MyAsymmetric'),convert(varchar(max ),EnryptData))  
go

--	解密(DecryptByAsymKey)
--	https://msdn.microsoft.com/ZH-CN/library/ms189507(v=sql.105).aspx
select *,convert(varchar(max),DecryptByAsymKey(asymkey_id('MyAsymmetric'),AsymmetricCol,N'Hello@MyAsymmetric'))
from EnryptTest
go

--	更改非对称密钥属性
--	https://msdn.microsoft.com/zh-cn/library/ms187311(v=sql.105).aspx

--	更改私钥密码
alter asymmetric key MyAsymmetric 
    with private key (
    decryption by password = N'Hello@MyAsymmetric',--原私钥密码
    encryption by password = N'Hello@MyAsymmetric');--新私钥密码
go

--	删除私钥,只保留公钥
--	如果将非对称密钥映射到 EKM 设备上的可扩展密钥管理 (EKM) 密钥并且未指定 REMOVE PROVIDER KEY 选项,
--	则会从数据库中删除该密钥,但不会从设备上删除它。这时会发出一条警告。
alter asymmetric key MyAsymmetric remove private key;
go

--	删除非对称密钥
--	https://msdn.microsoft.com/ZH-CN/library/ms188389(v=sql.105).aspx
drop symmetric key MyAsymmetric ;
go

--	删除测试列
alter table EnryptTest drop column AsymmetricCol
go

【对称密钥】

/***************************************【对称密钥】*************************************/
--	也称为单密钥加密,采用单钥密码系统的加密方法,同一个密钥可以同时用作信息的加密和解密.
--	非对称密钥消耗多些系统性能,一般使用对称密钥加密数据,使用非对称密钥保护对称密钥

select * from sys.key_encryptions
select * from sys.crypt_properties
select * from sys.certificates
select * from sys.asymmetric_keys
select * from sys.openkeys
select * from sys.symmetric_keys

select * from EnryptTest

--	添加测试列
alter table EnryptTest add SymmetricCol varbinary(max)
go

--	创建对称密钥
--	https://msdn.microsoft.com/zh-cn/library/ms188357(v=sql.105).aspx
create symmetric key MySymmetric	--以密码加密的对称密钥
with 
	algorithm=aes_128 
	encryption by password='Hello@MySymmetric';
go
create symmetric key MySymmetric	--以非对称密钥加密的对称密钥
with 
	algorithm=aes_128 
	encryption by asymmetric key MyAsymmetric
go

--	打开对称密钥(打开才能有效使用加密解密函数)
--	https://msdn.microsoft.com/zh-cn/library/ms190499(v=sql.105).aspx
open symmetric key MySymmetric decryption by password='Hello@MySymmetric';
go
open symmetric key MySymmetric decryption by asymmetric key MyAsymmetric with password='Hello@MyAsymmetric';
go

--	加密数据
--	https://technet.microsoft.com/zh-cn/library/ms174361%28v=sql.105%29.aspx?f=255&MSPPError=-2147217396
update EnryptTest set SymmetricCol = encryptbykey(key_guid('MySymmetric'),convert(varchar(max),EnryptData))
go

--	解密数据
--	https://technet.microsoft.com/zh-cn/library/ms181860(v=sql.105).aspx
select *,convert(varchar(max ) ,convert (varchar(max ),decryptbykey(SymmetricCol)))  
from EnryptTest
go

--	关闭对称密钥,或关闭在当前会话中打开的所有对称密钥
--	https://msdn.microsoft.com/zh-cn/library/ms177938%28v=sql.105%29.aspx?f=255&MSPPError=-2147217396
--	close all symmetric keys; 
close symmetric key MySymmetric;
go

--	alter symmetric 添加或删除新的加密方式(如添加多多个密码,任何一个密码都可用)
--	https://msdn.microsoft.com/zh-cn/library/ms189440(v=sql.105).aspx

open symmetric key MySymmetric decryption by password='Hello@MySymmetric';

alter symmetric key MySymmetric add encryption by password = 'Hello@kk' --New another Password

close symmetric key MySymmetric;

open symmetric key MySymmetric decryption by password='Hello@kk'; --Use New Password

select convert(varchar(max ) ,convert (varchar(max ),decryptbykey(SymmetricCol))) from EnryptTest

alter symmetric key MySymmetric drop encryption by password = 'Hello@kk'--Drop the new Password

close symmetric key MySymmetric;
go

--	删除对称密钥
--	https://msdn.microsoft.com/zh-cn/library/ms182698(v=sql.105).aspx
drop symmetric key MySymmetric;
go

--	删除测试列
alter table EnryptTest drop column SymmetricCol
go

【示例】

--	测试数据
/*
drop certificate  Mycertificate;
go
drop master key
go
drop table EnryptTest
go
*/
create table EnryptTest
(
	id int not null primary key,
	EnryptData nvarchar(20),
)
go

insert into EnryptTest
values(1,N'888888'),(2,N'888888'),(3,N'123456'),(4,N'A');
go

select * from EnryptTest;

alter table EnryptTest add CertificateCol varbinary(max)
go



--创建主密钥
create master key encryption by password = N'Hello@MyMasterKey'
go
/*
key_id	thumbprint	crypt_type	crypt_type_desc				crypt_property
------	----------	----------	---------------------	------------------
101		0x01		ESKM		ENCRYPTION BY MASTER KEY	0x7A2FEDA8139F1DE8F3377424C120DBDB8E1F7EAAEC1BBD73E72AC04F5CEECBFAC15FC7E130CA1756281EA0D8E6997F44
101		NULL		ESKP		ENCRYPTION BY PASSWORD		0x61D8F28F12CE4A1247F91E0ED828F2E937206E5D69B0754EE76756567AB428CBD5B54B76BCD1FC15E5E12202DBA4E187
*/

--创建证书,因为默认使用主密钥加密,此处不需要密码
create certificate Mycertificate
with subject = N'EnryptData certificate',
start_date = N'20150401',
expiry_date = N'20160401';
go

--加密解密都自动使用服务主密钥加密了。即使使用“close master key ”也不起作用
update EnryptTest 
set CertificateCol = EncryptByCert(CERT_ID('Mycertificate'),CONVERT(VARCHAR(MAX),EnryptData))
go
select *,CONVERT(VARCHAR(MAX ),DECRYPTBYCERT(CERT_ID('Mycertificate'),CertificateCol)) 
from EnryptTest;
go

--现在删除“服务主密钥”
alter master key drop encryption by service master key
go

--再查询数据,没有解密出来。不自动使用主密钥加密解密了
select *,CONVERT(VARCHAR(MAX ),DECRYPTBYCERT(CERT_ID('Mycertificate'),CertificateCol)) 
from EnryptTest;
go

--这时需要显式打开主密钥,使用主密钥密码加密解密
open master key decryption by password = N'Hello@MyMasterKey'
go

--再查询数据,解密出来了。
select *,CONVERT(VARCHAR(MAX ),DECRYPTBYCERT(CERT_ID('Mycertificate'),CertificateCol)) 
from EnryptTest;
go

--最后关闭主密钥
close master key 
go

--查看主密钥,少了"ENCRYPTION BY MASTER KEY",没有了主密钥进行加密,而是使用密码进行加密
select * from sys.key_encryptions
/*
key_id	thumbprint	crypt_type	crypt_type_desc			crypt_property
------	----------	----------	---------------------	------------------
101		NULL		ESKP		ENCRYPTION BY PASSWORD	0xFB7D746C3CF0471147ECD710B1173B69A966421089FBB813BCF108E1ED90574F5C5F0998BA44F48869E05E9093BC59E6
*/


--删除测试数据
drop certificate  Mycertificate;
go
drop master key
go
drop table EnryptTest
go


参考:
服务主密钥:https://msdn.microsoft.com/zh-cn/library/ms189060(v=sql.90).aspx

插图2张:

技术分享

技术分享



SQLServer 数据加密解密(一)

标签:

原文地址:http://blog.csdn.net/kk185800961/article/details/44871603

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!