码迷,mamicode.com
首页 > 移动开发 > 详细

【转】android移植之request_suspend_state: wakeup & init: untracked pid xx exited问题的解决

时间:2015-06-17 23:10:36      阅读:444      评论:0      收藏:0      [点我收藏+]

标签:

原文网址:http://blog.csdn.net/dragon101788/article/details/8187880

Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
s3c-rtc s3c64xx-rtc: hctosys: invalid date/time
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
IP-Config: Complete:
     device=eth0, addr=10.17.98.2, mask=255.255.255.0, gw=10.17.98.1,
     host=10.17.98.2, domain=, nis-domain=(none),
     bootserver=255.255.255.255, rootserver=10.17.98.1, rootpath=
Looking up port of RPC 100003/2 on 10.17.98.1
Looking up port of RPC 100005/1 on 10.17.98.1
VFS: Mounted root (nfs filesystem) on device 0:14.
devtmpfs: mounted
Freeing init memory: 164K
init: cannot open ‘/initlogo.rle‘
init: Unable to open persistent property directory /data/property errno: 2
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: cannot find ‘/system/etc/install-recovery.sh‘, disabling ‘flash_recovery‘
enabling adb
adb_open
sh: can‘t access tty; job control turned off
$ warning: `rild‘ uses 32-bit capabilities (legacy support in use)
request_suspend_state: wakeup (3->0) at 9647061791 (1970-01-01 00:00:09.646297565 UTC)
init: untracked pid 57 exited
init: untracked pid 61 exited
request_suspend_state: wakeup (0->0) at 10556468227 (1970-01-01 00:00:10.555704332 UTC)
init: untracked pid 77 exited
init: untracked pid 78 exited
request_suspend_state: wakeup (0->0) at 15070871761 (1970-01-01 00:00:15.070107956 UTC)
init: untracked pid 82 exited
init: untracked pid 84 exited
request_suspend_state: wakeup (0->0) at 19556415746 (1970-01-01 00:00:19.555651460 UTC)

修改init.rc里面
mount rootfs rootfs / ro remount 改成
mount rootfs rootfs / rw remount

如果问题解决请顶一下哦~~~~~

 

【转】android移植之request_suspend_state: wakeup & init: untracked pid xx exited问题的解决

标签:

原文地址:http://www.cnblogs.com/wi100sh/p/4584497.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!