码迷,mamicode.com
首页 > 系统相关 > 详细

linux c 获取硬盘的序列号

时间:2015-07-16 16:46:28      阅读:286      评论:0      收藏:0      [点我收藏+]

标签:

获取硬盘序列号的方法
找到指定硬盘的设备文件(如果是根目录的话,可以通过读取 /etc/mtab 文件获取),打开对应的设备文件。然后使用系统调用ioctl。
在这里 ioctl 的第二个参数为 HDIO_GET_IDENTITY (获得指定文件描述符的标志号)
第三个参数为 struct hd_driveid ,在 linux/hdreg.h 中。 struct hd_driveid 结构声明如下:

/*
 * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
 *
 * If you change something here, please remember to update fix_driveid() in
 * ide/probe.c.
 */
struct hd_driveid {
    unsigned short  config;     /* lots of obsolete bit flags */
    unsigned short  cyls;       /* Obsolete, "physical" cyls */
    unsigned short  reserved2;  /* reserved (word 2) */
    unsigned short  heads;      /* Obsolete, "physical" heads */
    unsigned short  track_bytes;    /* unformatted bytes per track */
    unsigned short  sector_bytes;   /* unformatted bytes per sector */
    unsigned short  sectors;    /* Obsolete, "physical" sectors per track */
    unsigned short  vendor0;    /* vendor unique */
    unsigned short  vendor1;    /* vendor unique */
    unsigned short  vendor2;    /* Retired vendor unique */
    unsigned char   serial_no[20];  /* 0 = not_specified */
    unsigned short  buf_type;   /* Retired */
    unsigned short  buf_size;   /* Retired, 512 byte increments
                     * 0 = not_specified
                     */
    unsigned short  ecc_bytes;  /* for r/w long cmds; 0 = not_specified */
    unsigned char   fw_rev[8];  /* 0 = not_specified */
    unsigned char   model[40];  /* 0 = not_specified */
    unsigned char   max_multsect;   /* 0=not_implemented */
    unsigned char   vendor3;    /* vendor unique */
    unsigned short  dword_io;   /* 0=not_implemented; 1=implemented */
    unsigned char   vendor4;    /* vendor unique */
    unsigned char   capability; /* (upper byte of word 49)
                     *  3:  IORDYsup
                     *  2:  IORDYsw
                     *  1:  LBA
                     *  0:  DMA
                     */
    unsigned short  reserved50; /* reserved (word 50) */
    unsigned char   vendor5;    /* Obsolete, vendor unique */
    unsigned char   tPIO;       /* Obsolete, 0=slow, 1=medium, 2=fast */
    unsigned char   vendor6;    /* Obsolete, vendor unique */
    unsigned char   tDMA;       /* Obsolete, 0=slow, 1=medium, 2=fast */
    unsigned short  field_valid;    /* (word 53)
                     *  2:  ultra_ok    word  88
                     *  1:  eide_ok     words 64-70
                     *  0:  cur_ok      words 54-58
                     */
    unsigned short  cur_cyls;   /* Obsolete, logical cylinders */
    unsigned short  cur_heads;  /* Obsolete, l heads */
    unsigned short  cur_sectors;    /* Obsolete, l sectors per track */
    unsigned short  cur_capacity0;  /* Obsolete, l total sectors on drive */
    unsigned short  cur_capacity1;  /* Obsolete, (2 words, misaligned int)     */
    unsigned char   multsect;   /* current multiple sector count */
    unsigned char   multsect_valid; /* when (bit0==1) multsect is ok */
    unsigned int    lba_capacity;   /* Obsolete, total number of sectors */
    unsigned short  dma_1word;  /* Obsolete, single-word dma info */
    unsigned short  dma_mword;  /* multiple-word dma info */
    unsigned short  eide_pio_modes; /* bits 0:mode3 1:mode4 */
    unsigned short  eide_dma_min;   /* min mword dma cycle time (ns) */
    unsigned short  eide_dma_time;  /* recommended mword dma cycle time (ns) */
    unsigned short  eide_pio;       /* min cycle time (ns), no IORDY  */
    unsigned short  eide_pio_iordy; /* min cycle time (ns), with IORDY */
    unsigned short  words69_70[2];  /* reserved words 69-70
                     * future command overlap and queuing
                     */
    unsigned short  words71_74[4];  /* reserved words 71-74
                     * for IDENTIFY PACKET DEVICE command
                     */
    unsigned short  queue_depth;    /* (word 75)
                     * 15:5 reserved
                     *  4:0 Maximum queue depth -1
                     */
    unsigned short  words76_79[4];  /* reserved words 76-79 */
    unsigned short  major_rev_num;  /* (word 80) */
    unsigned short  minor_rev_num;  /* (word 81) */
    unsigned short  command_set_1;  /* (word 82) supported
                     * 15:  Obsolete
                     * 14:  NOP command
                     * 13:  READ_BUFFER
                     * 12:  WRITE_BUFFER
                     * 11:  Obsolete
                     * 10:  Host Protected Area
                     *  9:  DEVICE Reset
                     *  8:  SERVICE Interrupt
                     *  7:  Release Interrupt
                     *  6:  look-ahead
                     *  5:  write cache
                     *  4:  PACKET Command
                     *  3:  Power Management Feature Set
                     *  2:  Removable Feature Set
                     *  1:  Security Feature Set
                     *  0:  SMART Feature Set
                     */
    unsigned short  command_set_2;  /* (word 83)
                     * 15:  Shall be ZERO
                     * 14:  Shall be ONE
                     * 13:  FLUSH CACHE EXT
                     * 12:  FLUSH CACHE
                     * 11:  Device Configuration Overlay
                     * 10:  48-bit Address Feature Set
                     *  9:  Automatic Acoustic Management
                     *  8:  SET MAX security
                     *  7:  reserved 1407DT PARTIES
                     *  6:  SetF sub-command Power-Up
                     *  5:  Power-Up in Standby Feature Set
                     *  4:  Removable Media Notification
                     *  3:  APM Feature Set
                     *  2:  CFA Feature Set
                     *  1:  READ/WRITE DMA QUEUED
                     *  0:  Download MicroCode
                     */
    unsigned short  cfsse;      /* (word 84)
                     * cmd set-feature supported extensions
                     * 15:  Shall be ZERO
                     * 14:  Shall be ONE
                     * 13:6 reserved
                     *  5:  General Purpose Logging
                     *  4:  Streaming Feature Set
                     *  3:  Media Card Pass Through
                     *  2:  Media Serial Number Valid
                     *  1:  SMART selt-test supported
                     *  0:  SMART error logging
                     */
    unsigned short  cfs_enable_1;   /* (word 85)
                     * command set-feature enabled
                     * 15:  Obsolete
                     * 14:  NOP command
                     * 13:  READ_BUFFER
                     * 12:  WRITE_BUFFER
                     * 11:  Obsolete
                     * 10:  Host Protected Area
                     *  9:  DEVICE Reset
                     *  8:  SERVICE Interrupt
                     *  7:  Release Interrupt
                     *  6:  look-ahead
                     *  5:  write cache
                     *  4:  PACKET Command
                     *  3:  Power Management Feature Set
                     *  2:  Removable Feature Set
                     *  1:  Security Feature Set
                     *  0:  SMART Feature Set
                     */
    unsigned short  cfs_enable_2;   /* (word 86)
                     * command set-feature enabled
                     * 15:  Shall be ZERO
                     * 14:  Shall be ONE
                     * 13:  FLUSH CACHE EXT
                     * 12:  FLUSH CACHE
                     * 11:  Device Configuration Overlay
                     * 10:  48-bit Address Feature Set
                     *  9:  Automatic Acoustic Management
                     *  8:  SET MAX security
                     *  7:  reserved 1407DT PARTIES
                     *  6:  SetF sub-command Power-Up
                     *  5:  Power-Up in Standby Feature Set
                     *  4:  Removable Media Notification
                     *  3:  APM Feature Set
                     *  2:  CFA Feature Set
                     *  1:  READ/WRITE DMA QUEUED
                     *  0:  Download MicroCode
                     */
    unsigned short  csf_default;    /* (word 87)
                     * command set-feature default
                     * 15:  Shall be ZERO
                     * 14:  Shall be ONE
                     * 13:6 reserved
                     *  5:  General Purpose Logging enabled
                     *  4:  Valid CONFIGURE STREAM executed
                     *  3:  Media Card Pass Through enabled
                     *  2:  Media Serial Number Valid
                     *  1:  SMART selt-test supported
                     *  0:  SMART error logging
                     */
    unsigned short  dma_ultra;  /* (word 88) */
    unsigned short  trseuc;     /* time required for security erase */
    unsigned short  trsEuc;     /* time required for enhanced erase */
    unsigned short  CurAPMvalues;   /* current APM values */
    unsigned short  mprc;       /* master password revision code */
    unsigned short  hw_config;  /* hardware config (word 93)
                     * 15:  Shall be ZERO
                     * 14:  Shall be ONE
                     * 13:
                     * 12:
                     * 11:
                     * 10:
                     *  9:
                     *  8:
                     *  7:
                     *  6:
                     *  5:
                     *  4:
                     *  3:
                     *  2:
                     *  1:
                     *  0:  Shall be ONE
                     */
    unsigned short  acoustic;   /* (word 94)
                     * 15:8 Vendor‘s recommended value
                     *  7:0 current value
                     */
    unsigned short  msrqs;      /* min stream request size */
    unsigned short  sxfert;     /* stream transfer time */
    unsigned short  sal;        /* stream access latency */
    unsigned int    spg;        /* stream performance granularity */
    unsigned long long lba_capacity_2;/* 48-bit total number of sectors */
    unsigned short  words104_125[22];/* reserved words 104-125 */
    unsigned short  last_lun;   /* (word 126) */
    unsigned short  word127;    /* (word 127) Feature Set
                     * Removable Media Notification
                     * 15:2 reserved
                     *  1:0 00 = not supported
                     *  01 = supported
                     *  10 = reserved
                     *  11 = reserved
                     */
    unsigned short  dlf;        /* (word 128)
                     * device lock function
                     * 15:9 reserved
                     *  8   security level 1:max 0:high
                     *  7:6 reserved
                     *  5   enhanced erase
                     *  4   expire
                     *  3   frozen
                     *  2   locked
                     *  1   en/disabled
                     *  0   capability
                     */
    unsigned short  csfo;       /*  (word 129)
                     * current set features options
                     * 15:4 reserved
                     *  3:  auto reassign
                     *  2:  reverting
                     *  1:  read-look-ahead
                     *  0:  write cache
                     */
    unsigned short  words130_155[26];/* reserved vendor words 130-155 */
    unsigned short  word156;    /* reserved vendor word 156 */
    unsigned short  words157_159[3];/* reserved vendor words 157-159 */
    unsigned short  cfa_power;  /* (word 160) CFA Power Mode
                     * 15 word 160 supported
                     * 14 reserved
                     * 13
                     * 12
                     * 11:0
                     */
    unsigned short  words161_175[15];/* Reserved for CFA */
    unsigned short  words176_205[30];/* Current Media Serial Number */
    unsigned short  words206_254[49];/* reserved words 206-254 */
    unsigned short  integrity_word; /* (word 255)
                     * 15:8 Checksum
                     *  7:0 Signature
                     */
};

其中 serial_no 问硬盘的序列号,如果此项为0,则为没有提供。

源码如下:

#include <stdio.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <linux/hdreg.h>
#include <sys/fcntl.h>

int main(){
    struct hd_driveid id;
    int fd = open("/dev/sda",O_RDONLY | O_NONBLOCK);
    if(fd < 0){
        perror("dev/sda");
        return 1;
}

版权声明:本文为博主原创文章,未经博主允许不得转载。

linux c 获取硬盘的序列号

标签:

原文地址:http://blog.csdn.net/u011641885/article/details/46911989

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!