标签:
先安装uml-utilities,该工具包含建立虚拟网络设备(所谓的“TAP interfaces”)的工具: sudo apt-get install uml-utilities 安装 桥接工具 bridge-utils #sudo apt-get install bridge-utils
#sudo gedit /etc/network/interfaces 在后面加上这个:
auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.168.1.104 network 192.168.1.0 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off
(上面的ip和网络地址等改成你需要的就行了)
启动网桥
sudo /sbin/ifup br0
sudo /etc/init.d/networking restart (或 sudo restart network-manager)
标签:
原文地址:http://www.cnblogs.com/ruiy/p/4663516.html