在Linux下编译安装Apache2(3)

时间：2015-08-14 17:23:26 阅读：686 评论：0 收藏：0 [点我收藏+]

标签：

APR（Apache Portable Run-time Libraries）主要为上层的应用程序提供一个可以跨越多操作系统平台使用的底层支持接口库，其对于Tomcat最大的作用就是socket调度。例如，在慢速网络上（模拟Internet）将Tomcat线程数开到300以上，然后模拟大量的并发请求时没有APR，基本上300个线程很快就会用满，以后的请求就只好等待，在安装APR之后，并发的线程数量明显下降，从原来的300可能会马上下降到只有几十，这样新的请求会毫无阻塞的进来。

在早期的Apache版本中，应用程序本身必须能够处理各种具体操作系统平台的细节，并针对不同的平台调用不同的处理函数。随着Apache的进一步开发，Apache组织决定将这些通用的函数独立出来并发展成为一个新的项目，这样APR的开发就从Apache中独立出来，Apache仅仅是使用APR而已。

虽然在局域网进行本地测试时，高并发的情况也可以被很容易的处理，但是在真实的Internet环境下，页面处理时间只占0.1\%都不到，绝大部分时间都用来页面传输。如果不用APR，一个线程同一时间只能处理一个用户，势必会造成阻塞，所以生产环境下使用APR是非常必要的。

一般情况下，APR开发包很容易理解为仅仅是一个开发包，不过事实上并不是。目前，完整的APR实际上包含了三个开发包：apr、apr-util以及apr-iconv，每一个开发包分别独立开发，并拥有自己的版本。

\begin{lstlisting}[language=bash]

$ cd ~/src

$ wget http://mirrors.aliyun.com/apache/apr/apr-1.5.2.tar.gz

--2015-08-11 23:02:52-- http://mirrors.aliyun.com/apache/apr/apr-1.5.2.tar.gz

Resolving mirrors.aliyun.com (mirrors.aliyun.com)... 115.28.122.210, 112.124.140.210

Connecting to mirrors.aliyun.com (mirrors.aliyun.com)|115.28.122.210|:80... connected.

HTTP request sent, awaiting response... 200 OK

Length: 1031613 (1007K) [application/octet-stream]

Saving to: ‘apr-1.5.2.tar.gz’

apr-1.5.2.tar.gz 100%[======================>] 1007K 898KB/s in 1.1s

2015-08-11 23:02:53 (898 KB/s) - ‘apr-1.5.2.tar.gz’ saved [1031613/1031613]

$ cd ~/apr-1.5.2

$ ./configure

$ make

$ sudo make install

[sudo] password for test:

make[1]: Entering directory ‘/home/test/src/apr-1.5.2‘

make[1]: Nothing to be done for ‘local-all‘.

make[1]: Leaving directory ‘/home/test/src/apr-1.5.2‘

/home/test/src/apr-1.5.2/build/mkdir.sh /usr/local/apr/lib /usr/local/apr/bin /usr/local/apr/build-1 \

/usr/local/apr/lib/pkgconfig /usr/local/apr/include/apr-1

mkdir /usr/local/apr

mkdir /usr/local/apr/lib

mkdir /usr/local/apr/bin

mkdir /usr/local/apr/build-1

mkdir /usr/local/apr/lib/pkgconfig

mkdir /usr/local/apr/include

mkdir /usr/local/apr/include/apr-1

/usr/bin/install -c -m 644 /home/test/src/apr-1.5.2/include/apr.h /usr/local/apr/include/apr-1

for f in /home/test/src/apr-1.5.2/include/apr_*.h; do \

/usr/bin/install -c -m 644 ${f} /usr/local/apr/include/apr-1; \

done

/bin/sh /home/test/src/apr-1.5.2/libtool --mode=install /usr/bin/install -c -m 755 libapr-1.la /usr/local/apr/lib

libtool: install: /usr/bin/install -c -m 755 .libs/libapr-1.so.0.5.2 /usr/local/apr/lib/libapr-1.so.0.5.2

libtool: install: (cd /usr/local/apr/lib && { ln -s -f libapr-1.so.0.5.2 libapr-1.so.0 || { rm -f libapr-1.so.0 && ln -s libapr-1.so.0.5.2 libapr-1.so.0; }; })

libtool: install: (cd /usr/local/apr/lib && { ln -s -f libapr-1.so.0.5.2 libapr-1.so || { rm -f libapr-1.so && ln -s libapr-1.so.0.5.2 libapr-1.so; }; })

libtool: install: /usr/bin/install -c -m 755 .libs/libapr-1.lai /usr/local/apr/lib/libapr-1.la

libtool: install: /usr/bin/install -c -m 755 .libs/libapr-1.a /usr/local/apr/lib/libapr-1.a

libtool: install: chmod 644 /usr/local/apr/lib/libapr-1.a

libtool: install: ranlib /usr/local/apr/lib/libapr-1.a

libtool: finish: PATH="/sbin:/bin:/usr/sbin:/usr/bin:/sbin" ldconfig -n /usr/local/apr/lib

----------------------------------------------------------------------

Libraries have been installed in:

/usr/local/apr/lib

If you ever happen to want to link against installed libraries

in a given directory, LIBDIR, you must either use libtool, and

specify the full pathname of the library, or use the `-LLIBDIR‘

flag during linking and do at least one of the following:

- add LIBDIR to the `LD_LIBRARY_PATH‘ environment variable

during execution

- add LIBDIR to the `LD_RUN_PATH‘ environment variable

during linking

- use the `-Wl,-rpath -Wl,LIBDIR‘ linker flag

- have your system administrator add LIBDIR to `/etc/ld.so.conf‘

See any operating system documentation about shared libraries for

more information, such as the ld(1) and ld.so(8) manual pages.

----------------------------------------------------------------------

/usr/bin/install -c -m 644 apr.exp /usr/local/apr/lib/apr.exp

/usr/bin/install -c -m 644 apr.pc /usr/local/apr/lib/pkgconfig/apr-1.pc

for f in libtool shlibtool; do \

if test -f ${f}; then /usr/bin/install -c -m 755 ${f} /usr/local/apr/build-1; fi; \

done

/usr/bin/install -c -m 755 /home/test/src/apr-1.5.2/build/mkdir.sh /usr/local/apr/build-1

for f in make_exports.awk make_var_export.awk; do \

/usr/bin/install -c -m 644 /home/test/src/apr-1.5.2/build/${f} /usr/local/apr/build-1; \

done

/usr/bin/install -c -m 644 build/apr_rules.out /usr/local/apr/build-1/apr_rules.mk

/usr/bin/install -c -m 755 apr-config.out /usr/local/apr/bin/apr-1-config

$ cd ~/src/httpd-2.4.16

$ ./configure

$ checking for chosen layout... Apache

checking for working mkdir -p... yes

checking for grep that handles long lines and -e... /usr/bin/grep

checking for egrep... /usr/bin/grep -E

checking build system type... x86_64-unknown-linux-gnu

checking host system type... x86_64-unknown-linux-gnu

checking target system type... x86_64-unknown-linux-gnu

configure:

configure: Configuring Apache Portable Runtime library...

configure:

checking for APR... yes

setting CC to "gcc"

setting CPP to "gcc -E"

setting CFLAGS to " -g -O2 -pthread"

setting CPPFLAGS to " -DLINUX -D_REENTRANT -D_GNU_SOURCE"

setting LDFLAGS to " "

configure:

configure: Configuring Apache Portable Runtime Utility library...

configure:

checking for APR-util... no

configure: error: APR-util not found. Please read the documentation.

$ cd ~/src

$ wget http://mirrors.aliyun.com/apache/apr/apr-util-1.5.4.tar.gz

--2015-08-11 23:12:26-- http://mirrors.aliyun.com/apache/apr/apr-util-1.5.4.tar.gz

Resolving mirrors.aliyun.com (mirrors.aliyun.com)... 112.124.140.210, 115.28.122.210

Connecting to mirrors.aliyun.com (mirrors.aliyun.com)|112.124.140.210|:80... connected.

HTTP request sent, awaiting response... 200 OK

Length: 874044 (854K) [application/octet-stream]

Saving to: ‘apr-util-1.5.4.tar.gz’

apr-util-1.5.4.tar.gz 100%[===================>] 853.56K 1.12MB/s in 0.7s

2015-08-11 23:12:27 (1.12 MB/s) - ‘apr-util-1.5.4.tar.gz’ saved [874044/874044]

$ tar zxvf apr-util-1.5.4.tar.gz

$ cd ~/src/apr-util-1.5.4

$ ./configure

checking build system type... x86_64-unknown-linux-gnu

checking host system type... x86_64-unknown-linux-gnu

checking target system type... x86_64-unknown-linux-gnu

checking for a BSD-compatible install... /usr/bin/install -c

checking for working mkdir -p... yes

APR-util Version: 1.5.4

checking for chosen layout... apr-util

checking for gcc... gcc

checking whether the C compiler works... yes

checking for C compiler default output file name... a.out

checking for suffix of executables...

checking whether we are cross compiling... no

checking for suffix of object files... o

checking whether we are using the GNU C compiler... yes

checking whether gcc accepts -g... yes

checking for gcc option to accept ISO C89... none needed

Applying apr-util hints file rules for x86_64-unknown-linux-gnu

checking for APR... no

configure: error: APR could not be located. Please use the --with-apr option.

$ ./configure --with-apr=/usr/local/apr

checking build system type... x86_64-unknown-linux-gnu

checking host system type... x86_64-unknown-linux-gnu

checking target system type... x86_64-unknown-linux-gnu

checking for a BSD-compatible install... /usr/bin/install -c

checking for working mkdir -p... yes

APR-util Version: 1.5.4

checking for chosen layout... apr-util

checking for gcc... gcc

checking whether the C compiler works... yes

checking for C compiler default output file name... a.out

checking for suffix of executables...

checking whether we are cross compiling... no

checking for suffix of object files... o

checking whether we are using the GNU C compiler... yes

checking whether gcc accepts -g... yes

checking for gcc option to accept ISO C89... none needed

Applying apr-util hints file rules for x86_64-unknown-linux-gnu

checking for APR... yes

setting CPP to "gcc -E"

adding "-pthread" to CFLAGS

setting CPPFLAGS to " -DLINUX -D_REENTRANT -D_GNU_SOURCE"

checking how to run the C preprocessor... gcc -E

checking for grep that handles long lines and -e... /usr/bin/grep

checking for egrep... /usr/bin/grep -E

checking for ANSI C header files... yes

checking for sys/types.h... yes

checking for sys/stat.h... yes

checking for stdlib.h... yes

checking for string.h... yes

checking for memory.h... yes

checking for strings.h... yes

checking for inttypes.h... yes

checking for stdint.h... yes

checking for unistd.h... yes

checking for ldap support...

checking for default DBM... sdbm (default)

checking for pg_config... no

checking libpq-fe.h usability... no

checking libpq-fe.h presence... no

checking for libpq-fe.h... no

checking postgresql/libpq-fe.h usability... no

checking postgresql/libpq-fe.h presence... no

checking for postgresql/libpq-fe.h... no

checking sqlite3.h usability... yes

checking sqlite3.h presence... yes

checking for sqlite3.h... yes

checking for sqlite3_open in -lsqlite3... yes

setting LDADD_dbd_sqlite3 to " -lsqlite3"

checking sqlite.h usability... no

checking sqlite.h presence... no

checking for sqlite.h... no

checking sybdb.h usability... no

checking sybdb.h presence... no

checking for sybdb.h... no

checking freetds/sybdb.h usability... no

checking freetds/sybdb.h presence... no

checking for freetds/sybdb.h... no

checking for odbc_config... no

checking sql.h usability... no

checking sql.h presence... no

checking for sql.h... no

checking odbc/sql.h usability... no

checking odbc/sql.h presence... no

checking for odbc/sql.h... no

checking Expat 1.95.x... yes

setting APRUTIL_EXPORT_LIBS to "-lexpat"

setting APRUTIL_LIBS to "-lexpat"

checking iconv.h usability... yes

checking iconv.h presence... yes

checking for iconv.h... yes

checking for type of inbuf parameter to iconv... char **

checking for iconv.h... (cached) yes

checking langinfo.h usability... yes

checking langinfo.h presence... yes

checking for langinfo.h... yes

checking for nl_langinfo... yes

checking for CODESET in langinfo.h... yes

checking whether APR has DSO support... yes

checking for library containing crypt... -lcrypt

checking if system crypt() function is threadsafe... no

checking for crypt_r... yes

checking style of crypt_r... struct_crypt_data

adding "/usr/local/apr/lib/libapr-1.la" to APRUTIL_LIBS

adding "-lrt" to APRUTIL_LIBS

adding "-lcrypt" to APRUTIL_LIBS

adding "-lpthread" to APRUTIL_LIBS

adding "-ldl" to APRUTIL_LIBS

configure: creating ./config.status

config.status: creating Makefile

config.status: creating export_vars.sh

config.status: creating build/pkg/pkginfo

config.status: creating apr-util.pc

config.status: creating apu-1-config

config.status: creating include/private/apu_select_dbm.h

config.status: creating include/apr_ldap.h

config.status: creating include/apu.h

config.status: creating include/apu_want.h

config.status: creating test/Makefile

config.status: creating include/private/apu_config.h

config.status: executing default commands

$ make

$ sudo make install

[sudo] password for test:

/usr/local/apr/build-1/mkdir.sh /usr/local/apr/lib/apr-util-1

mkdir /usr/local/apr/lib/apr-util-1

make[1]: Entering directory ‘/home/test/src/apr-util-1.5.4‘

make[1]: Nothing to be done for ‘local-all‘.

make[1]: Leaving directory ‘/home/test/src/apr-util-1.5.4‘

/usr/local/apr/build-1/mkdir.sh /usr/local/apr/include/apr-1 /usr/local/apr/lib/pkgconfig \

/usr/local/apr/lib /usr/local/apr/bin

for f in /home/test/src/apr-util-1.5.4/include/*.h /home/test/src/apr-util-1.5.4/include/*.h; do \

/usr/bin/install -c -m 644 ${f} /usr/local/apr/include/apr-1; \

done

/usr/bin/install -c -m 644 apr-util.pc /usr/local/apr/lib/pkgconfig/apr-util-1.pc

list=‘‘; for i in $list; do \

( cd $i ; make DESTDIR= install ); \

done

/bin/sh /usr/local/apr/build-1/libtool --mode=install /usr/bin/install -c -m 755 libaprutil-1.la /usr/local/apr/lib

libtool: install: /usr/bin/install -c -m 755 .libs/libaprutil-1.so.0.5.4 /usr/local/apr/lib/libaprutil-1.so.0.5.4

libtool: install: (cd /usr/local/apr/lib && { ln -s -f libaprutil-1.so.0.5.4 libaprutil-1.so.0 || { rm -f libaprutil-1.so.0 && ln -s libaprutil-1.so.0.5.4 libaprutil-1.so.0; }; })

libtool: install: (cd /usr/local/apr/lib && { ln -s -f libaprutil-1.so.0.5.4 libaprutil-1.so || { rm -f libaprutil-1.so && ln -s libaprutil-1.so.0.5.4 libaprutil-1.so; }; })

libtool: install: /usr/bin/install -c -m 755 .libs/libaprutil-1.lai /usr/local/apr/lib/libaprutil-1.la

libtool: install: /usr/bin/install -c -m 755 .libs/libaprutil-1.a /usr/local/apr/lib/libaprutil-1.a

libtool: install: chmod 644 /usr/local/apr/lib/libaprutil-1.a

libtool: install: ranlib /usr/local/apr/lib/libaprutil-1.a

libtool: finish: PATH="/sbin:/bin:/usr/sbin:/usr/bin:/sbin" ldconfig -n /usr/local/apr/lib

----------------------------------------------------------------------

Libraries have been installed in:

/usr/local/apr/lib

If you ever happen to want to link against installed libraries

in a given directory, LIBDIR, you must either use libtool, and

specify the full pathname of the library, or use the `-LLIBDIR‘

flag during linking and do at least one of the following:

- add LIBDIR to the `LD_LIBRARY_PATH‘ environment variable

during execution

- add LIBDIR to the `LD_RUN_PATH‘ environment variable

during linking

- use the `-Wl,-rpath -Wl,LIBDIR‘ linker flag

- have your system administrator add LIBDIR to `/etc/ld.so.conf‘

See any operating system documentation about shared libraries for

more information, such as the ld(1) and ld.so(8) manual pages.

----------------------------------------------------------------------

/usr/bin/install -c -m 644 aprutil.exp /usr/local/apr/lib

/usr/bin/install -c -m 755 apu-config.out /usr/local/apr/bin/apu-1-config

$ cd ~/src/httpd-2.4.16

$ ./configure

$ make

$ sudo make install

Making install in srclib

make[1]: Entering directory ‘/home/test/src/httpd-2.4.16/srclib‘

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/srclib‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/srclib‘

make[1]: Leaving directory ‘/home/test/src/httpd-2.4.16/srclib‘

Making install in os

make[1]: Entering directory ‘/home/test/src/httpd-2.4.16/os‘

Making install in unix

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/os/unix‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/os/unix‘

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/os/unix‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/os/unix‘

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/os‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/os‘

make[1]: Leaving directory ‘/home/test/src/httpd-2.4.16/os‘

Making install in server

make[1]: Entering directory ‘/home/test/src/httpd-2.4.16/server‘

Making install in mpm

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/server/mpm‘

Making install in event

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/server/mpm/event‘

make[4]: Entering directory ‘/home/test/src/httpd-2.4.16/server/mpm/event‘

mkdir /usr/local/apache2

mkdir /usr/local/apache2/modules

make[4]: Leaving directory ‘/home/test/src/httpd-2.4.16/server/mpm/event‘

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/server/mpm/event‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/server/mpm‘

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/server/mpm‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/server/mpm‘

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/server‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/server‘

make[1]: Leaving directory ‘/home/test/src/httpd-2.4.16/server‘

Making install in modules

make[1]: Entering directory ‘/home/test/src/httpd-2.4.16/modules‘

Making install in aaa

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/aaa‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/aaa‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_authn_file.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_authn_dbm.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_authn_anon.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_authn_dbd.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_authn_socache.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_authn_core.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_authz_host.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_authz_groupfile.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_authz_user.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_authz_dbm.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_authz_owner.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_authz_dbd.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_authz_core.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_access_compat.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_auth_basic.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_auth_form.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_auth_digest.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_allowmethods.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/aaa‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/aaa‘

Making install in cache

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/cache‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/cache‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_file_cache.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_cache.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_cache_disk.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_cache_socache.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_socache_shmcb.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_socache_dbm.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_socache_memcache.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/cache‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/cache‘

Making install in core

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/core‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/core‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_macro.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/core‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/core‘

Making install in database

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/database‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/database‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_dbd.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/database‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/database‘

Making install in debugging

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/debugging‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/debugging‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_dumpio.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/debugging‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/debugging‘

Making install in filters

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/filters‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/filters‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_buffer.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_ratelimit.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_reqtimeout.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_ext_filter.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_request.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_include.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_filter.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_substitute.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_sed.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_deflate.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/filters‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/filters‘

Making install in http

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/http‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/http‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_mime.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/http‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/http‘

Making install in loggers

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/loggers‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/loggers‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_log_config.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_log_debug.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_logio.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/loggers‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/loggers‘

Making install in metadata

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/metadata‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/metadata‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_env.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_expires.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_headers.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_unique_id.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_setenvif.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_version.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_remoteip.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/metadata‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/metadata‘

Making install in proxy

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/proxy‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/proxy‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_proxy.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_proxy_connect.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_proxy_ftp.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_proxy_http.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_proxy_fcgi.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_proxy_scgi.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_proxy_wstunnel.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_proxy_ajp.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_proxy_balancer.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_proxy_express.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/proxy‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/proxy‘

Making install in session

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/session‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/session‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_session.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_session_cookie.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_session_dbd.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/session‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/session‘

Making install in slotmem

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/slotmem‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/slotmem‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_slotmem_shm.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/slotmem‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/slotmem‘

Making install in ssl

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/ssl‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/ssl‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_ssl.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/ssl‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/ssl‘

Making install in proxy/balancers

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/proxy/balancers‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/proxy/balancers‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_lbmethod_byrequests.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_lbmethod_bytraffic.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_lbmethod_bybusyness.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_lbmethod_heartbeat.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/proxy/balancers‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/proxy/balancers‘

Making install in arch/unix

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/arch/unix‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/arch/unix‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_unixd.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/arch/unix‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/arch/unix‘

Making install in dav/main

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/dav/main‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/dav/main‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_dav.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/dav/main‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/dav/main‘

Making install in generators

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/generators‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/generators‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_status.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_autoindex.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_info.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_cgid.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/generators‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/generators‘

Making install in dav/fs

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/dav/fs‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/dav/fs‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_dav_fs.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/dav/fs‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/dav/fs‘

Making install in mappers

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/mappers‘

make[3]: Entering directory ‘/home/test/src/httpd-2.4.16/modules/mappers‘

/usr/local/apr/build-1/libtool --silent --mode=install install mod_vhost_alias.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_negotiation.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_dir.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_actions.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_speling.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_userdir.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_alias.la /usr/local/apache2/modules/

/usr/local/apr/build-1/libtool --silent --mode=install install mod_rewrite.la /usr/local/apache2/modules/

make[3]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/mappers‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules/mappers‘

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/modules‘

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules‘

make[1]: Leaving directory ‘/home/test/src/httpd-2.4.16/modules‘

Making install in support

make[1]: Entering directory ‘/home/test/src/httpd-2.4.16/support‘

make[2]: Entering directory ‘/home/test/src/httpd-2.4.16/support‘

mkdir /usr/local/apache2/bin

make[2]: Leaving directory ‘/home/test/src/httpd-2.4.16/support‘

make[1]: Leaving directory ‘/home/test/src/httpd-2.4.16/support‘

make[1]: Entering directory ‘/home/test/src/httpd-2.4.16‘