码迷,mamicode.com
首页 >  
搜索关键字:ccnp    ( 164个结果
CCNP学习笔记5-路由部分--EIGRP与RIP综合题
步骤1,启用IP2,每个路由器loopback地址10.10.x.xx表示路由器号3,R4R5使用PPP连接。消除多余的32位主机路由ints2/1encapsulationppp------------封装PPPnopeerneighbor-route-------消除多余的32位主机路由shutnoshut4,只使用图中的PVC,实现帧中继网络全通。允许通过广播流..
分类:其他好文   时间:2015-12-08 07:21:26    阅读次数:161
CCNP学习笔记4-路由部分--路由控制
◆passive-interface-可以用在ripeigrpospf中。其中在rip中是只收不发报文在eigrp不收不发报文在ospf不收不发报文路由协议进程中network命令作用有两个:1,把network的地址网段的路由宣告进去,掩码长度由接口配置决定,不是network决定例如:network10.0.0.10.0.0.255就是把10..
分类:其他好文   时间:2015-12-04 06:38:03    阅读次数:195
CCNP学习笔记3-路由部分--OSPF
ospfripeigrp分类IGP无类链路状态IGP无类距离矢量IGP无类混合封装IP89udp520IP88更新地址224.0.0.5-6224.0.0.9224.0.0.10也可以neighbor指单播更新方式定时(30分)完整完整(30秒定时触发增量触发老化(60分)触发AD110120汇总5外部170内部90度量带宽跳数5个K值(默认带宽延时..
分类:其他好文   时间:2015-11-15 23:24:31    阅读次数:401
ccnp学习笔记
1eigrp是igp(内部网管协议)协议,最大支持100跳,rip最大支持15跳,16跳不可达。2是高级距离矢量协议(类似链路)(ADV)与rip对比rip建邻居是纯触发机制端口两端设置为为ripeigrp是先建立邻居,后建立连接关系后邻居表将连接关系装在拓扑表中进行dlal算法计算后放入路由表,3...
分类:其他好文   时间:2015-10-08 16:26:19    阅读次数:337
Cisco学习笔记 CCNP-OSPF
Cisco学习笔记 CCNP-OSPF
分类:系统相关   时间:2015-09-17 13:34:51    阅读次数:297
LAB - CCNP BGP Case Study
TopologyObjectives:Plan, design, and implement the internation Travel Agency core network.Plan, design, nad implement the Travel Data Providers netwro...
分类:其他好文   时间:2015-08-20 10:27:15    阅读次数:231
CCNP - LAB BGP Route Reflectors and Route Filters
TopologyObjectivesConfigure iBGP routers to use a route reflector and simple router filter.BackgroundThe International Travel Agency maintains a full-...
分类:其他好文   时间:2015-08-18 11:39:44    阅读次数:246
LAB - CCNP Using the BGP AS_PATH Attribute
TopologyObjectives:Use BGP commands to prevent private AS numbers from being advertised to the outside world.Use the AS_PATH attribute to filter BGP r...
分类:其他好文   时间:2015-08-08 21:15:19    阅读次数:299
LAB - CCNP Configuring iBGP and eBGP Local Preference, and MED
TopologyObjectivesFor IBGP peers to correctly exchange routing information, use the next-hop-self command with the Local-Preference and MED attributes...
分类:其他好文   时间:2015-08-08 21:10:46    阅读次数:151
LAB – CCNP Single-Area OSPF Link Costs and Interface priorities
Single-Area OSPF Link Costs and Interface PrioritiesTopologyObjectives:Configure single-area OSPF on a router. Advertise loopback interfaces in to OSP...
分类:其他好文   时间:2015-07-30 10:53:07    阅读次数:108
164条   上一页 1 ... 9 10 11 12 13 ... 17 下一页
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!