码迷，mamicode.com
首页 > 其他好文 > 详细

ATmega16L驱动ILI9325/9328

时间：2015-08-26 15:38:48      阅读：178      评论：0      收藏：0      [点我收藏+]

标签：

  首先是硬件连线：PB----8位数据口

                                   PA0--- 复位信号RESET

                                   PA1---片选CS

                                   PA2----寄存器选择信号RS

                                   PA3---写信号WR

                                   PA4---读信号RD

 

文件名：Type.h，主要定义一些数据变量的别名

/****************************************Copyright (c)************************************************** 
**                                   Southeast University                            
**--------------File Info------------------------------------------------------------------------------- 
** File Name:          Type.h 
** Last modified Date: 2012-03-23
** Last Version:       1.0 
** Description:        定义数据类型别名
**------------------------------------------------------------------------------------------------------ 
** Created By:         JianGe
** Created date:       2012-03-23
** Version:            1.0 
**------------------------------------------------------------------------------------------------------ */
 
#ifndef  __TYPE_H__ 
#define  __TYPE_H__ 
 
/******************************************************************************************************** 
*                       Date types(Compiler specific)  数据类型（和编译器相关）                         *                  
********************************************************************************************************/ 
typedef unsigned char  uint8;          // Unsigned  8 bit quantity  无符号8位整型变量
typedef unsigned char  uchar;          // Unsigned  8 bit quantity  无符号8位整型变量       
typedef signed   char  int8;           // Signed    8 bit quantity  有符号8位整型变量 
typedef unsigned short uint16;         // Unsigned 16 bit quantity  无符号16位整型变量 
typedef signed   short int16;          // Signed   16 bit quantity  有符号16位整型变量  
typedef unsigned int   uint32;         // Unsigned 32 bit quantity  无符号32位整型变量
typedef unsigned int   uint;         // Unsigned 32 bit quantity  无符号32位整型变量  
typedef signed   int   int32;          // Signed   32 bit quantity  有符号32位整型变量 
typedef float           fp32;          // Single precision floating point 单精度浮点数（32位长度）     
typedef double          fp64;          // Double precision floating point 双精度浮点数（64位长度）   
 
#ifndef TRUE 
#define TRUE  1 
#endif 
 
#ifndef FALSE 
#define FALSE 0 
#endif 
 
#ifndef NULL 
#define NULL  0 
#endif 
 
 
 
#endif 
/********************************************************************************************************* 
*                                        End Of File                                                     * 
*********************************************************************************************************/

文件名：USART.h，串口操作函数的声明

/****************************************Copyright (c)************************************************** 
**                                   Southeast University                            
**--------------File Info------------------------------------------------------------------------------- 
** File Name:          USART.h 
** Last modified Date: 2012-03-23
** Last Version:       1.0 
** Description:        串口函数声明
**------------------------------------------------------------------------------------------------------ 
** Created By:         JianGe
** Created date:       2012-03-23
** Version:            1.0 
**------------------------------------------------------------------------------------------------------ */
#ifndef _USART_H
#define _USART_H

#include "Type.h"

#define BAUD 9600  //波特率设置
#define CRYSTAL  4000000  //11059200   //晶振频率 
#define BAUD_SET (uint16)((uint32)CRYSTAL/(16*(uint32)BAUD)-1)
#define BAUD_H  (uint8)(BAUD_SET>>8)
#define BAUD_L  (uint8)(BAUD_SET)

#define FE_EER BIT(FE)   //帧接收错误
#define PE_EER BIT(PE)    //校验错误
#define DATA_OVER BIT(DOR)  //接收溢出错误
#define UDR_EMPTY BIT(UDRE)    //数据寄存器空
#define USAT_TX_EN UCSRB|=BIT(TXEN)    //使能USART发送
#define USAT_TX_NO_EN UCSRB&=~BIT(TXEN)
#define USAT_RX_EN UCSRB|=BIT(RXEN)    //使能USART接收
#define USAT_RX_NO_EN UCSRB&=~BIT(RXEN)

extern void USART_Init(void);
extern void Uart_Transmit(unsigned char i);
extern unsigned char Uart_Receive( void );

#endif
/********************************************************************************************************* 
*                                        End Of File                                                     * 
*********************************************************************************************************/

文件名：Delay.h，延时函数的声明

/****************************************Copyright (c)************************************************** 
**                                   Southeast University                            
**--------------File Info------------------------------------------------------------------------------- 
** File Name:          Delay.h
** Last modified Date: 2012-03-23
** Last Version:       1.0 
** Description:        延时函数声明
**------------------------------------------------------------------------------------------------------ 
** Created By:         JianGe
** Created date:       2012-03-23
** Version:            1.0 
**------------------------------------------------------------------------------------------------------ */
# ifndef DELAY_H_H_
# define DELAY_H_H_

# define     DELAY_US        asm("nop"); asm("nop"); asm("nop"); asm("nop");                                    asm("nop"); asm("nop"); asm("nop"); asm("nop");
                                    
extern void Delay_nUS(unsigned int n);
extern void Delay_MS(void);
extern void Delay_nMS(unsigned int n);

# endif

/********************************************************************************************************* 
*                                        End Of File                                                     * 
*********************************************************************************************************/

文件名：LCDDriver.h，LCD驱动函数和应用函数的声明

/****************************************Copyright (c)************************************************** 
**                                   Southeast University                            
**--------------File Info------------------------------------------------------------------------------- 
** File Name:          LCD_Driver.h 
** Last modified Date: 2012-03-24
** Last Version:       1.0 
** Description:        LCD驱动函数声明
**------------------------------------------------------------------------------------------------------ 
** Created By:         JianGe
** Created date:       2012-03-24
** Version:            1.0 
**------------------------------------------------------------------------------------------------------ */
# ifndef LCD_DRIVER_H_H_
# define LCD_DRIVER_H_H_

# include "Type.h"
# include <iom16v.h>


extern void LCD_Port_Init(void);
extern void LCD_WriteCmd(uint32 regID);
extern void LCD_WriteData(uint32 data);
extern void LCD_WriteReg(uint32 regID, uint32 regData);
extern unsigned int LCD_ReadReg(uint32 regID);
extern void LCD_ILI9325_Init(void);
extern void LCD_SetWindow(unsigned int x0, unsigned int x1, unsigned int y0, unsigned int y1);
extern void LCD_ClearScreen(unsigned int color);
extern void LCD_Fill_Rectangle(unsigned int x0,unsigned int y0,unsigned int x1,unsigned int y1,unsigned int color);
extern unsigned char Get_CharOffset(unsigned char char_data);
extern void Set_CharWindow(unsigned int lineNum, unsigned int rowNum);
extern void LCD_WriteChar(unsigned int lineNum, 
                   unsigned int rowNum,                                                                             
                   unsigned int charColor,                                 
                   unsigned int bkColor,
                   unsigned char chChar)
extern void LCD_WriteString(unsigned char lineNum, unsigned char rowNum,
                     unsigned int charColor,
                     unsigned int bkColor,
                     unsigned char *p_str)

# endif

/********************************************************************************************************* 
*                                        End Of File                                                     * 
*********************************************************************************************************/

文件名：LCD_Font.h  LCD字体库的声明

/****************************************Copyright (c)************************************************** 
**                                   Southeast University                            
**--------------File Info------------------------------------------------------------------------------- 
** File Name:          LCD_Font.h 
** Last modified Date: 2012-03-27
** Last Version:       1.0 
** Description:        LCD显示字符的字节表
**------------------------------------------------------------------------------------------------------ 
** Created By:         JianGe
** Created date:       2012-03-27
** Version:            1.0 
**------------------------------------------------------------------------------------------------------ */
# ifndef LCD_FONT_H_H_
# define LCD_FONT_H_H_

//常用ASCII字符码表                            
const unsigned char Letter[][16] = 
{
//第一栏从‘ ‘到 ‘?‘                        
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",0*/
{0x00,0x00,0x00,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00,0x18,0x18,0x00,0x00},/*"!",1*/
{0x00,0x12,0x36,0x24,0x48,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*""",2*/
{0x00,0x00,0x00,0x24,0x24,0x24,0xFE,0x48,0x48,0x48,0xFE,0x48,0x48,0x48,0x00,0x00},/*"#",3*/
{0x00,0x00,0x10,0x38,0x54,0x54,0x50,0x30,0x18,0x14,0x14,0x54,0x54,0x38,0x10,0x10},/*"$",4*/
{0x00,0x00,0x00,0x44,0xA4,0xA8,0xA8,0xA8,0x54,0x1A,0x2A,0x2A,0x2A,0x44,0x00,0x00},/*"%",5*/
{0x00,0x00,0x00,0x30,0x48,0x48,0x48,0x50,0x6E,0xA4,0x94,0x88,0x89,0x76,0x00,0x00},/*"&",6*/
{0x00,0x60,0x60,0x20,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"‘",7*/
{0x00,0x02,0x04,0x08,0x08,0x10,0x10,0x10,0x10,0x10,0x10,0x08,0x08,0x04,0x02,0x00},/*"(",8*/
{0x00,0x40,0x20,0x10,0x10,0x08,0x08,0x08,0x08,0x08,0x08,0x10,0x10,0x20,0x40,0x00},/*")",9*/
{0x00,0x00,0x00,0x00,0x10,0x10,0xD6,0x38,0x38,0xD6,0x10,0x10,0x00,0x00,0x00,0x00},/*"*",10*/
{0x00,0x00,0x00,0x00,0x10,0x10,0x10,0x10,0xFE,0x10,0x10,0x10,0x10,0x00,0x00,0x00},/*"+",11*/
{0x00,0x60,0x60,0x20,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"‘",12*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"-",13*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x60,0x00,0x00},/*".",14*/
{0x00,0x00,0x01,0x02,0x02,0x04,0x04,0x08,0x08,0x10,0x10,0x20,0x20,0x40,0x40,0x00},/*"/",15*/
{0x00,0x00,0x00,0x18,0x24,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x24,0x18,0x00,0x00},/*"0",16*/
{0x00,0x00,0x00,0x10,0x70,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00},/*"1",17*/
{0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x04,0x04,0x08,0x10,0x20,0x42,0x7E,0x00,0x00},/*"2",18*/
{0x00,0x00,0x00,0x3C,0x42,0x42,0x04,0x18,0x04,0x02,0x02,0x42,0x44,0x38,0x00,0x00},/*"3",19*/
{0x00,0x00,0x00,0x04,0x0C,0x14,0x24,0x24,0x44,0x44,0x7E,0x04,0x04,0x1E,0x00,0x00},/*"4",20*/
{0x00,0x00,0x00,0x7E,0x40,0x40,0x40,0x58,0x64,0x02,0x02,0x42,0x44,0x38,0x00,0x00},/*"5",21*/
{0x00,0x00,0x00,0x1C,0x24,0x40,0x40,0x58,0x64,0x42,0x42,0x42,0x24,0x18,0x00,0x00},/*"6",22*/
{0x00,0x00,0x00,0x7E,0x44,0x44,0x08,0x08,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00},/*"7",23*/
{0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x24,0x18,0x24,0x42,0x42,0x42,0x3C,0x00,0x00},/*"8",24*/
{0x00,0x00,0x00,0x18,0x24,0x42,0x42,0x42,0x26,0x1A,0x02,0x02,0x24,0x38,0x00,0x00},/*"9",25*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00},/*":",26*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x20},/*";",27*/
{0x00,0x00,0x00,0x02,0x04,0x08,0x10,0x20,0x40,0x20,0x10,0x08,0x04,0x02,0x00,0x00},/*"<",28*/
{0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00},/*"=",29*/
{0x00,0x00,0x00,0x40,0x20,0x10,0x08,0x04,0x02,0x04,0x08,0x10,0x20,0x40,0x00,0x00},/*">",30*/
{0x00,0x00,0x00,0x3C,0x42,0x42,0x62,0x02,0x04,0x08,0x08,0x00,0x18,0x18,0x00,0x00},/*"?",31*/
//第二栏从‘@‘开始                    
{0x00,0x00,0x00,0x38,0x44,0x5A,0xAA,0xAA,0xAA,0xAA,0xB4,0x42,0x44,0x38,0x00,0x00},/*"@",32*/
{0x00,0x00,0x00,0x10,0x10,0x18,0x28,0x28,0x24,0x3C,0x44,0x42,0x42,0xE7,0x00,0x00},/*"A",33*/
{0x00,0x00,0x00,0xF8,0x44,0x44,0x44,0x78,0x44,0x42,0x42,0x42,0x44,0xF8,0x00,0x00},/*"B",34*/
{0x00,0x00,0x00,0x3E,0x42,0x42,0x80,0x80,0x80,0x80,0x80,0x42,0x44,0x38,0x00,0x00},/*"C",35*/
{0x00,0x00,0x00,0xF8,0x44,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x44,0xF8,0x00,0x00},/*"D",36*/
{0x00,0x00,0x00,0xFC,0x42,0x48,0x48,0x78,0x48,0x48,0x40,0x42,0x42,0xFC,0x00,0x00},/*"E",37*/
{0x00,0x00,0x00,0xFC,0x42,0x48,0x48,0x78,0x48,0x48,0x40,0x40,0x40,0xE0,0x00,0x00},/*"F",38*/
{0x00,0x00,0x00,0x3C,0x44,0x44,0x80,0x80,0x80,0x8E,0x84,0x44,0x44,0x38,0x00,0x00},/*"G",39*/
{0x00,0x00,0x00,0xE7,0x42,0x42,0x42,0x42,0x7E,0x42,0x42,0x42,0x42,0xE7,0x00,0x00},/*"H",40*/
{0x00,0x00,0x00,0x7C,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00},/*"I",41*/
{0x00,0x00,0x00,0x3E,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x88,0xF0},/*"J",42*/
{0x00,0x00,0x00,0xEE,0x44,0x48,0x50,0x70,0x50,0x48,0x48,0x44,0x44,0xEE,0x00,0x00},/*"K",43*/
{0x00,0x00,0x00,0xE0,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x42,0xFE,0x00,0x00},/*"L",44*/
{0x00,0x00,0x00,0xEE,0x6C,0x6C,0x6C,0x6C,0x54,0x54,0x54,0x54,0x54,0xD6,0x00,0x00},/*"M",45*/
{0x00,0x00,0x00,0xC7,0x62,0x62,0x52,0x52,0x4A,0x4A,0x4A,0x46,0x46,0xE2,0x00,0x00},/*"N",46*/
{0x00,0x00,0x00,0x38,0x44,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x44,0x38,0x00,0x00},/*"O",47*/
{0x00,0x00,0x00,0xFC,0x42,0x42,0x42,0x42,0x7C,0x40,0x40,0x40,0x40,0xE0,0x00,0x00},/*"P",48*/
{0x00,0x00,0x00,0x38,0x44,0x82,0x82,0x82,0x82,0x82,0xB2,0xCA,0x4C,0x38,0x06,0x00},/*"Q",49*/
{0x00,0x00,0x00,0xFC,0x42,0x42,0x42,0x7C,0x48,0x48,0x44,0x44,0x42,0xE3,0x00,0x00},/*"R",50*/
{0x00,0x00,0x00,0x3E,0x42,0x42,0x40,0x20,0x18,0x04,0x02,0x42,0x42,0x7C,0x00,0x00},/*"S",51*/
{0x00,0x00,0x00,0xFE,0x92,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x38,0x00,0x00},/*"T",52*/
{0x00,0x00,0x00,0xE7,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x3C,0x00,0x00},/*"U",53*/
{0x00,0x00,0x00,0xE7,0x42,0x42,0x44,0x24,0x24,0x28,0x28,0x18,0x10,0x10,0x00,0x00},/*"V",54*/
{0x00,0x00,0x00,0xD6,0x92,0x92,0x92,0x92,0xAA,0xAA,0x6C,0x44,0x44,0x44,0x00,0x00},/*"W",55*/
{0x00,0x00,0x00,0xE7,0x42,0x24,0x24,0x18,0x18,0x18,0x24,0x24,0x42,0xE7,0x00,0x00},/*"X",56*/
{0x00,0x00,0x00,0xEE,0x44,0x44,0x28,0x28,0x10,0x10,0x10,0x10,0x10,0x38,0x00,0x00},/*"Y",57*/
{0x00,0x00,0x00,0x7E,0x84,0x04,0x08,0x08,0x10,0x20,0x20,0x42,0x42,0xFC,0x00,0x00},/*"Z",58*/
{0x00,0x1E,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x1E,0x00},/*"[",59*/
{0x00,0x00,0x40,0x40,0x20,0x20,0x10,0x10,0x10,0x08,0x08,0x04,0x04,0x04,0x02,0x02},/*"\",60*/
{0x00,0x78,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x78,0x00},/*"]",61*/
{0x00,0x1C,0x22,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"^",62*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"-",63*/
//第三栏从‘‘‘开始                    
{0x00,0x60,0x60,0x20,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"‘",64*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x42,0x1E,0x22,0x42,0x42,0x3F,0x00,0x00},/*"a",65*/
{0x00,0x00,0x00,0xC0,0x40,0x40,0x40,0x58,0x64,0x42,0x42,0x42,0x64,0x58,0x00,0x00},/*"b",66*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x22,0x40,0x40,0x40,0x22,0x1C,0x00,0x00},/*"c",67*/
{0x00,0x00,0x00,0x06,0x02,0x02,0x02,0x1E,0x22,0x42,0x42,0x42,0x26,0x1B,0x00,0x00},/*"d",68*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x42,0x7E,0x40,0x40,0x42,0x3C,0x00,0x00},/*"e",69*/
{0x00,0x00,0x00,0x0F,0x11,0x10,0x10,0x7E,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00},/*"f",70*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3E,0x44,0x44,0x38,0x40,0x3C,0x42,0x42,0x3C},/*"g",71*/
{0x00,0x00,0x00,0xC0,0x40,0x40,0x40,0x5C,0x62,0x42,0x42,0x42,0x42,0xE7,0x00,0x00},/*"h",72*/
{0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x70,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00},/*"i",73*/
{0x00,0x00,0x00,0x0C,0x0C,0x00,0x00,0x1C,0x04,0x04,0x04,0x04,0x04,0x04,0x44,0x78},/*"j",74*/
{0x00,0x00,0x00,0xC0,0x40,0x40,0x40,0x4E,0x48,0x50,0x68,0x48,0x44,0xEE,0x00,0x00},/*"k",75*/
{0x00,0x00,0x00,0x70,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00},/*"l",76*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x49,0x49,0x49,0x49,0x49,0xED,0x00,0x00},/*"m",77*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xDC,0x62,0x42,0x42,0x42,0x42,0xE7,0x00,0x00},/*"n",78*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x42,0x42,0x3C,0x00,0x00},/*"o",79*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xD8,0x64,0x42,0x42,0x42,0x44,0x78,0x40,0xE0},/*"p",80*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1E,0x22,0x42,0x42,0x42,0x22,0x1E,0x02,0x07},/*"q",81*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xEE,0x32,0x20,0x20,0x20,0x20,0xF8,0x00,0x00},/*"r",82*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3E,0x42,0x40,0x3C,0x02,0x42,0x7C,0x00,0x00},/*"s",83*/
{0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x7C,0x10,0x10,0x10,0x10,0x10,0x0C,0x00,0x00},/*"t",84*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC6,0x42,0x42,0x42,0x42,0x46,0x3B,0x00,0x00},/*"u",85*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE7,0x42,0x24,0x24,0x28,0x10,0x10,0x00,0x00},/*"v",86*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xD7,0x92,0x92,0xAA,0xAA,0x44,0x44,0x00,0x00},/*"w",87*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x6E,0x24,0x18,0x18,0x18,0x24,0x76,0x00,0x00},/*"x",88*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE7,0x42,0x24,0x24,0x28,0x18,0x10,0x10,0xE0},/*"y",89*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7E,0x44,0x08,0x10,0x10,0x22,0x7E,0x00,0x00},/*"z",90*/
{0x00,0x03,0x04,0x04,0x04,0x04,0x04,0x08,0x04,0x04,0x04,0x04,0x04,0x04,0x03,0x00},/*"{",91*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00},/*":",92*/
{0x00,0x60,0x10,0x10,0x10,0x10,0x10,0x08,0x10,0x10,0x10,0x10,0x10,0x10,0x60,0x00},/*"}",93*/
{0x30,0x4C,0x43,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"~",94*/
{0x00,0x1C,0x22,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"^",95*/
};

# endif
/********************************************************************************************************* 
*                                        End Of File                                                     * 
*********************************************************************************************************/

文件名： Delay.c，延时函数的实现

/****************************************Copyright (c)************************************************** 
**                                   Southeast University                            
**--------------File Info------------------------------------------------------------------------------- 
** File Name:          Delay.c
** Last modified Date: 2012-03-23
** Last Version:       1.0 
** Description:        延时函数实现
**------------------------------------------------------------------------------------------------------ 
** Created By:         JianGe
** Created date:       2012-03-23
** Version:            1.0 
**------------------------------------------------------------------------------------------------------ */
#include "Delay.h"
#include "Type.h"

/*********************************************************************************************************  
** Function name:       Delay_nUS 
** Descriptions:        延时n微秒
** input parameters:    无
** output parameters:   无  
** Returned value:      无  
*********************************************************************************************************/
void Delay_nUS(uint32 n)
{
    uint32 i=0;
    for(i=0; i<n; i++)
    {
        DELAY_US;
    }
}

/*********************************************************************************************************  
** Function name:       Delay_MS 
** Descriptions:        延时1毫秒
** input parameters:    无
** output parameters:   无  
** Returned value:      无  
*********************************************************************************************************/
void Delay_MS(void)
{
    uint32 i=0;
    for(i=0; i<1000; i++)
    {
        DELAY_US;
    }
}

/*********************************************************************************************************  
** Function name:       Delay_nMS
** Descriptions:        延时n毫秒
** input parameters:    无
** output parameters:   无  
** Returned value:      无  
*********************************************************************************************************/
void Delay_nMS(uint32 n)
{
    uint32 i=0;
    for(i=0; i<n; i++)
    {
        Delay_MS();
    }
}

/********************************************************************************************************* 
*                                        End Of File                                                     * 
*********************************************************************************************************/

文件名：USART.c 串口调试函数的实现

/****************************************Copyright (c)************************************************** 
**                                   Southeast University                            
**--------------File Info------------------------------------------------------------------------------- 
** File Name:          USART.c
** Last modified Date: 2012-03-23
** Last Version:       1.0 
** Description:        串口函数实现
**------------------------------------------------------------------------------------------------------ 
** Created By:         JianGe
** Created date:       2012-03-23
** Version:            1.0 
**------------------------------------------------------------------------------------------------------ */

#include <iom16v.h>
#include "USART.h"

/*串口初始化函数*/
void USART_Init(void) 
{ 
UCSRA = 0x02;  /*倍速*/ 
UCSRB = 0x18;  /*允许接收和发送*/ 
UCSRC = 0x06;  /*8位数据*/ 
UBRRH = 0x00; 
//UBRRL = 12;  /*9600*/
//UBRRL = 103;  //11.0592M下9600
UBRRL = 207;  //16MHz下9600

}/*数据发送，查询方式*/
void Uart_Transmit(unsigned char i) 
{ 
 while (!(UCSRA & (1<<UDRE)));  /* 等待发送缓冲器为空*/ 
 UDR = i;    /* 发送数据*/
 }
 /*数据接收，查询方式*/
 unsigned char Uart_Receive( void ) 
 { while (!(UCSRA & (1<<RXC)));  /* 等待接收数据*/ 
 return UDR;    /* 获取并返回数据*/
 }

 
 /********************************************************************************************************* 
*                                        End Of File                                                     * 
*********************************************************************************************************/

文件名：LCDDriver.c  LCD驱动函数以及上层函数的实现

/****************************************Copyright (c)************************************************** 
**                                   Southeast University                            
**--------------File Info------------------------------------------------------------------------------- 
** File Name:          LCDDriver.c 
** Last modified Date: 2012-04-12
** Last Version:       1.0 
** Description:        LCD驱动函数的实现
**------------------------------------------------------------------------------------------------------ 
** Created By:         JianGe
** Created date:       2012-03-24
** Version:            1.0 
**------------------------------------------------------------------------------------------------------ */
# include "Delay.h"
# include <iom16v.h>
# include <macros.h>
# include "USART.h"
# include "LCD_Font.h"
# include "Type.h"

///////////屏显示参数设置///////////////
//设置屏显示像素大小                    
# define X_SIZE            240
# define Y_SIZE            320
//x和y的最大坐标值,坐标原点为(0, 0)        
# define X_END            (X_SIZE - 1)
# define Y_END            (Y_SIZE - 1)
//一个字符x*y的分别大小                    
# define CHAR_X_SIZE    8
# define CHAR_Y_SIZE    16
//横坐标能显示的字符数X_SIZE/CHAR_X_SIZE
# define CHAR_X_NUM        30
//纵坐标能显示的字符数Y_SIZE/CHAR_Y_SIZE
# define CHAR_Y_NUM        20
////////////////////////////////////////


//LCD控制端口动作宏定义                        
# define LCD_CS_BIT        PA1 
# define LCD_RS_BIT        PA2 
# define LCD_WR_BIT        PA3 
# define LCD_RD_BIT        PA4  
# define LCD_REST_BIT    PA0 

# define LCD_CLT_PORT PORTA
# define LCD_CLT_PIN  PINA
# define LCD_CLT_DDR  DDRA

                        
# define LCD_CS_L        LCD_CLT_PORT &= ~BIT(LCD_CS_BIT)
# define LCD_CS_H        LCD_CLT_PORT |= BIT(LCD_CS_BIT)

# define LCD_RS_L        LCD_CLT_PORT &= ~BIT(LCD_RS_BIT)
# define LCD_RS_H        LCD_CLT_PORT |= BIT(LCD_RS_BIT)

# define LCD_WR_L        LCD_CLT_PORT &= ~BIT(LCD_WR_BIT)
# define LCD_WR_H        LCD_CLT_PORT |= BIT(LCD_WR_BIT)

# define LCD_RD_L        LCD_CLT_PORT &= ~BIT(LCD_RD_BIT)
# define LCD_RD_H        LCD_CLT_PORT |= BIT(LCD_RD_BIT)

# define LCD_REST_L        LCD_CLT_PORT &= ~BIT(LCD_REST_BIT)
# define LCD_REST_H        LCD_CLT_PORT |= BIT(LCD_REST_BIT)


//8位数据口
# define DATA_H        PB0
# define LCD_DATA_PORT        PORTB
# define LCD_DATA_DDR        DDRB
# define LCD_DATA_PIN        PINB
# define LCD_DATA_IN        DDRB = 0x00
# define LCD_DATA_OUT        DDRB = 0xFF


//读GRAM时需要一个虚晃的读(Dummy Read)    
# define DUMMY_READ()    LCD_RD_L;LCD_RD_H;LCD_RD_L;LCD_RD_H;

//片选，开始9328的某种操作前调用
# define LCD_SELECT()  LCD_CS_L

//片选，结束9328的某项操作后调用
# define LCD_DIS_SELECT() LCD_CS_H


/*********************************************************************************************************  
** Function name:       LCD_Port_Init
** Descriptions:        LCD的控制端口和数据端口的初始化
** input parameters:    寄存器地址regID
** output parameters:   无
** Returned value:      无
*********************************************************************************************************/

void LCD_Port_Init(void)
{
    LCD_DATA_OUT;
    LCD_DATA_PORT = 0xFF;
    LCD_CLT_DDR = 0xFF;
    LCD_CS_H;
    LCD_RS_H;
    LCD_WR_H;
    LCD_RD_H;
    LCD_REST_H;
}


/*********************************************************************************************************  
** Function name:       LCD_WriteCmd
** Descriptions:        写寄存器命令，选择一个寄存器
** input parameters:    寄存器地址regID
** output parameters:   无
** Returned value:      无
*********************************************************************************************************/
///////////////////////////////////////////////////////////////////////////////////////////////////////
      // nCS       ----\__________________________________________/---------------------------  //
      // RS        ------\______________________________/------------------------------------  //
      // nRD       ----------------------------------------------------------------------------  //
      // nWR       --------\______/----------\_____/-------------------------------------------  //
      // DB[10:17]  ----[寄存器高8位]-----[寄存器低8位]-------------------------------------------//
////////////////////////////////////////////////////////////////////////////////////////////////////////
void LCD_WriteCmd(uint32 regID)
{
    LCD_RS_L;
    
    LCD_DATA_PORT = regID>>8;
    LCD_WR_L;
    LCD_WR_H;
    
    LCD_DATA_PORT = regID;
    LCD_WR_L;
    LCD_WR_H;
    
    LCD_RS_H;
}

/*********************************************************************************************************  
** Function name:       LCD_WriteData
** Descriptions:        向LCD写数据
** input parameters:    待写入的数据data
** output parameters:   无
** Returned value:      无
*********************************************************************************************************/
////////////////////////////////////////////////////////////////////////////////////////////////////
      // nCS       ----\__________________________________________/-----------------------------//
      // RS        -----------------------------------------------------------------------------//
      // nRD       -------------------------------------------------------------------------  //
      // nWR       --------\______/--------\_____/-----------------------------------------  //
      // DB[10:17]  -----[数据高8位]----- [数据低8位]------------------------------------------- //                                                            
/////////////////////////////////////////////////////////////////////////////////////////////////////
void LCD_WriteData(uint32 data)
{
    LCD_DATA_PORT = data>>8;
    LCD_WR_L;
    LCD_WR_H;
    
    LCD_DATA_PORT = data;
    LCD_WR_L;
    LCD_WR_H;
}



/*********************************************************************************************************  
** Function name:       LCD_WriteReg
** Descriptions:        向一个寄存器写入数据
** input parameters:    寄存器地址：regID 待写入的数据regData
** output parameters:   无
** Returned value:      无
*********************************************************************************************************/
////////////////////////////////////////////////////////////////////////////////////////////////////
      // nCS       ----\_____________________________________________________________/--------//
      // RS        ----\____________________________/-----------------------------------------//
      // nRD       -------------------------------------------------------------------------  //
      // nWR       ------\______/--------\_____/--------\______/-----\______/---------------- //
      // DB[10:17]  ---[寄存器高8位]---[寄存器低8位]---[数据高8位]----[数据低8位]--------------- //                                                            
/////////////////////////////////////////////////////////////////////////////////////////////////////
void LCD_WriteReg(uint32 regID, uint32 regData)
{
    LCD_RS_L;
    
    LCD_DATA_PORT = regID>>8;
    LCD_WR_L;
    LCD_WR_H;
    
    LCD_DATA_PORT = regID;
    LCD_WR_L;
    LCD_WR_H;
    
    LCD_RS_H;
    LCD_DATA_PORT = regData>>8;
    LCD_WR_L;
    LCD_WR_H;
    
    LCD_DATA_PORT = regData;
    LCD_WR_L;
    LCD_WR_H;
}


/*********************************************************************************************************  
** Function name:       LCD_ReadReg
** Descriptions:        读取指定寄存器的数据
** input parameters:    寄存器地址：regID
** output parameters:   无
** Returned value:      读出数据（16位）
*********************************************************************************************************/
////////////////////////////////////////////////////////////////////////////////////////////////////
      // nCS       ----\_____________________________________________________________/--------//
      // RS        ----\____________________________/-----------------------------------------//
      // nRD       -----------------------------------\_____/------\_____/------------------  //
      // nWR       ------\______/--------\_____/---------------------------------------------- //
      // DB[10:17]  ---[寄存器高8位]--[寄存器低8位]--[数据高8位]--[数据低8位]--------------- //                                                            
/////////////////////////////////////////////////////////////////////////////////////////////////////
unsigned int LCD_ReadReg(uint32 regID)
{
    uint32 regData;
    LCD_WriteCmd(regID);
    
    LCD_DATA_IN;
    LCD_RS_H;
    
    LCD_RD_L;
    LCD_RD_H;
    regData = LCD_DATA_PIN;
    
    regData = regData << 8;
    
    LCD_RD_L;
    LCD_RD_H;
    regData |= LCD_DATA_PIN;
    LCD_WR_L;
    LCD_WR_H;
    
    LCD_DATA_OUT;
    return regData;
}


/*********************************************************************************************************  
** Function name:       LCD_ILI9325_Init
** Descriptions:        9325/28内部寄存器的初始化
** input parameters:    无
** output parameters:   无
** Returned value:      无
*********************************************************************************************************/
void LCD_ILI9325_Init(void)
{
    uint32 ID = 0x0000;
    LCD_Port_Init();
    LCD_REST_L;  //复位
    Delay_nMS(50);
    LCD_REST_H;
    Delay_nMS(50);
    
    LCD_SELECT();    
    ID = LCD_ReadReg(0x0000);  // 读LCD的ID，这里是9328
    Uart_Transmit(ID>>8);  //串口观察
    Uart_Transmit(ID);
    
    LCD_WriteReg(0x0001,0x0100); 
     LCD_WriteReg(0x0002,0x0700); 
     LCD_WriteReg(0x0003,0x1030);   //转换RGB至GBR，水平扫描
     LCD_WriteReg(0x0004,0x0000); 
     LCD_WriteReg(0x0008,0x0207);  
     LCD_WriteReg(0x0009,0x0000);
     LCD_WriteReg(0x000A,0x0000); 
     LCD_WriteReg(0x000C,0x0000); 
     LCD_WriteReg(0x000D,0x0000);
     LCD_WriteReg(0x000F,0x0000);
    //power on sequence VGHVGL
     LCD_WriteReg(0x0010,0x0000);   
     LCD_WriteReg(0x0011,0x0007);  
     LCD_WriteReg(0x0012,0x0000);  
     LCD_WriteReg(0x0013,0x0000); 
    //vgh 
     LCD_WriteReg(0x0010,0x1290);   
     LCD_WriteReg(0x0011,0x0227);
     //vregiout 
     LCD_WriteReg(0x0012,0x001d); //0x001b
     //vom amplitude
     LCD_WriteReg(0x0013,0x1500);
     //vom H
     LCD_WriteReg(0x0029,0x0018); 
     LCD_WriteReg(0x002B,0x000D); 

    //gamma
     LCD_WriteReg(0x0030,0x0004);
     LCD_WriteReg(0x0031,0x0307);
     LCD_WriteReg(0x0032,0x0002);// 0006
     LCD_WriteReg(0x0035,0x0206);
     LCD_WriteReg(0x0036,0x0408);
     LCD_WriteReg(0x0037,0x0507); 
     LCD_WriteReg(0x0038,0x0204);//0200
     LCD_WriteReg(0x0039,0x0707); 
     LCD_WriteReg(0x003C,0x0405);// 0504
     LCD_WriteReg(0x003D,0x0F02); 
     //ram
     LCD_WriteReg(0x0050,0x0000); 
     LCD_WriteReg(0x0051,0x00EF);
     LCD_WriteReg(0x0052,0x0000); 
     LCD_WriteReg(0x0053,0x013F);  
     LCD_WriteReg(0x0060,0xA700); 
     LCD_WriteReg(0x0061,0x0001); 
     LCD_WriteReg(0x006A,0x0000); 
     //
     LCD_WriteReg(0x0080,0x0000); 
     LCD_WriteReg(0x0081,0x0000); 
     LCD_WriteReg(0x0082,0x0000); 
     LCD_WriteReg(0x0083,0x0000); 
     LCD_WriteReg(0x0084,0x0000); 
     LCD_WriteReg(0x0085,0x0000); 
     //
     LCD_WriteReg(0x0090,0x0010); 
     LCD_WriteReg(0x0092,0x0600); 
     LCD_WriteReg(0x0093,0x0003); 
     LCD_WriteReg(0x0095,0x0110); 
     LCD_WriteReg(0x0097,0x0000); 
     LCD_WriteReg(0x0098,0x0000);
     LCD_WriteReg(0x0007,0x0133);
     LCD_DIS_SELECT();
}

    
/*********************************************************************************************************  
** Function name:       LCD_SetWindow
** Descriptions:        定义刷屏窗口
** input parameters:    起始坐标 (x0，y0),终止坐标（x1,y1)
** output parameters:   无
** Returned value:      无
*********************************************************************************************************/
static void LCD_SetWindow(unsigned int x0, unsigned int x1, unsigned int y0, unsigned int y1)
{
      LCD_WriteReg(0x0050,x0);
      LCD_WriteReg(0x0051,x1);
      LCD_WriteReg(0x0052,y0);
      LCD_WriteReg(0x0053,y1);
      LCD_WriteReg(0x0020,x0);
      LCD_WriteReg(0x0021,y0);
      LCD_WriteCmd(0x0022);   //GRAM寄存器，之后可以写GRAM缓冲区
}





/*******************************************************************************************************************/
/*******************************************************************************************************************/
/**************************************************以下为LCD的应用函数**********************************************/
/*******************************************************************************************************************/
/*******************************************************************************************************************/


/*********************************************************************************************************  
** Function name:       LCD_ClearScreen
** Descriptions:        刷整屏为一种颜色
** input parameters:    颜色的RGB值color
** output parameters:   无
** Returned value:      无
*********************************************************************************************************/
void LCD_ClearScreen(unsigned int color)
{
        unsigned int i,j;
        LCD_SELECT();   //选择9328
           LCD_SetWindow(0,240,0,320); //320x240的屏
        for (i=0;i<320;i++)
        {
            for (j=0;j<240;j++)
            {
                LCD_WriteData(color); //向GRAM写入RGB数据
            }
        }
        LCD_DIS_SELECT(); //操作完毕
}

/*********************************************************************************************************  
** Function name:       LCD_Fill
** Descriptions:        填充一个矩形区域    
** input parameters:    矩形起始坐标----(x0,y0），矩形终点坐标--（x1，y1）
** output parameters:   无
** Returned value:      无
*********************************************************************************************************/    
//                    
void LCD_Fill_Rectangle(unsigned int x0,unsigned int y0,unsigned int x1,unsigned int y1,unsigned int color)
{
    unsigned long  i;
    
    LCD_SELECT();   //选择9328
    LCD_SetWindow(x0, x1, y0, y1);
    
    for(i=0; i < (x1 - x0 + 1)*(y1 - y0 + 1); i++)                
      {
        LCD_WriteData(color);        //填充颜色                                
      }
    
    LCD_DIS_SELECT(); //操作完毕                    
}


/*********************************************************************************************************  
** Function name:       Get_CharOffset
** Descriptions:        获取字节的偏移量 
** input parameters:    输入字节
** output parameters:   无
** Returned value:      偏移量
*********************************************************************************************************/
unsigned char Get_CharOffset(unsigned char char_data)
{
    if(char_data >= ‘ ‘ && char_data <= ‘}‘)
    {
        char_data -= ‘ ‘;                        //字符偏移从空格开始                
    }
    else 
    {
        char_data = ‘ ‘;                        //如无匹配字符以空格代替            
    }
    return char_data;   //返回字符所在字符表的位置
}


/*********************************************************************************************************  
** Function name:       Set_CharWindow
** Descriptions:        设置字节窗口
** input parameters:    每个字符8X16像素，共30行20列，lineNum----字符所在行号，rowLine----字符所在列号
** output parameters:   无
** Returned value:      无
*********************************************************************************************************/
//例如显示‘2‘这个字节窗口，为一个8X16的像素矩形
// _ _ _ _ _ _ _ _ ,
// _ _ _ _ _ _ _ _ ,
// _ _ _ _ _ _ _ _ ,
// _ _ X X X _ _ _ ,
// _ X _ _ _ X _ _ ,        // lineNum
// _ _ _ _ _ X _ _ ,
// _ _ _ _ _ X _ _ ,
// _ _ _ _ X _ _ _ ,
//_ _ _ X _ _ _ _ ,
// _ _ X _ _ _ _ _ ,
// _ X _ _ _ _ _ _ ,
// _ X X X X X _ _ ,
// _ _ _ _ _ _ _ _ ,
// _ _ _ _ _ _ _ _ ,
// _ _ _ _ _ _ _ _ ,
// _ _ _ _ _ _ _ _ ,

void Set_CharWindow(unsigned int lineNum, unsigned int rowNum)
{
    unsigned int x0 = 0; 
    unsigned int y0 = 0;
    
    x0 = rowNum<<3;    //起始X像素坐标    
    y0 = lineNum<<4;   //其实Y像素坐标
    
    LCD_SetWindow(x0,x0+7,y0,y0+15);
}

/*********************************************************************************************************  
** Function name:     LCD_WriteChar
** Descriptions:      向屏幕写一个字节
** input parameters:   lineNum表示字符开始的行数，rowNum表字符开始的列数，共30X20个字符，背景色bkColor,写入的字节chChar
                       字符颜色----charColor
                       待显示的字符ch_char
** output parameters:  无
** Returned value:     无
*********************************************************************************************************/
void LCD_WriteChar(unsigned int lineNum, 
                   unsigned int rowNum,                                                                             
                   unsigned int charColor,                                 
                   unsigned int bkColor,
                   unsigned char chChar)
{
    unsigned char show_cnt = 0;
    unsigned char bit_cnt = 0;
    unsigned int charPos = 0; // 字符在字符表中所在的位置
    
    LCD_SELECT(); 
    charPos = Get_CharOffset(chChar);        //获取字模显示的偏移量                
    Set_CharWindow(lineNum, rowNum);        //设置起始坐标，xy是8*16的方格坐标    
    
    for(show_cnt = 0; show_cnt < 16; show_cnt ++)
    {                                                
                                                     
        for(bit_cnt = 0; bit_cnt < 8; bit_cnt ++)
        {
            if( Letter[charPos][show_cnt] & BIT(7 - bit_cnt) )
            {
                LCD_WriteData(charColor);  //字符颜色
            }
            else
            {
                LCD_WriteData(bkColor);  //背景色
            }
        }
    }
    LCD_DIS_SELECT();            
}


/*******************************************************************************************************************  
** Function name:       LCD_WriteString
** Descriptions:        向屏幕写字符串
** input parameters:    字符起始行列(lineNum，rowLine)，背景色---bkColor,字节颜色---charColor，字符串指针 p_str
** output parameters:   无
** Returned value:      无
********************************************************************************************************************/
void LCD_WriteString(unsigned char lineNum, unsigned char rowNum,
                     unsigned int charColor,
                     unsigned int bkColor,
                     unsigned char *p_str)
{
    while(*p_str)
    {
        //计算坐标                            
        if(*p_str == ‘\n‘)                    //换行                                
        {
            rowNum = 0;
            lineNum++;
            p_str ++;                        //调过换行符,不用显示                
            continue;                        //查询下一个字符                    
        }
        else                                 //未遇到换行符则按正常显示坐标自加    
        {
            LCD_WriteChar(lineNum,rowNum,charColor,bkColor,*p_str);
            rowNum++;
            if(rowNum == CHAR_X_NUM)
            {
                rowNum = 0;
                lineNum ++;
                if(lineNum == CHAR_Y_NUM)
                {
                    lineNum = 0;
                }
            }
        }            
        p_str ++;  //字符串指针++
    }
}

/********************************************************************************************************* 
*                                        End Of File                                                     * 
*********************************************************************************************************/

文件名：main.c 主函数测试

/****************************************Copyright (c)************************************************** 
**                                   Southeast University                            
**--------------File Info------------------------------------------------------------------------------- 
** File Name:          main.c 
** Last modified Date: 2012-04-11
** Last Version:       1.0 
** Description:        测试函数
**------------------------------------------------------------------------------------------------------ 
** Created By:         JianGe
** Created date:       2012-03-23
** Version:            1.0 
**------------------------------------------------------------------------------------------------------ */


# include <iom16v.h>
# include <macros.h>
# include "Type.h"
# include "Delay.h"
# include "USART.h"

void main(void)
{
    unsigned char* ptr = "ABCDEFGHIJKLMNOPQRSTUVWXYZ";
    USART_Init(); 
    LCD_ILI9325_Init();
    LCD_ClearScreen(0xF800);  
    LCD_Fill_Rectangle(0,0,200,200,0xF800); 
    LCD_WriteChar(1,1,0xF800,0xFFFF,‘1‘);  //显示字符
    LCD_WriteString(0,0,0xF800,0xFFFF,ptr);  //显示字符串
}

 

ATmega16L驱动ILI9325/9328

标签：

原文地址：http://www.cnblogs.com/tifnan2015/p/4760378.html
踩
(0)
赞
(0)
   
举报
评论 一句话评论（0）
登录后才能评论！
分享档案
更多>
2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)
周排行
mamicode.com排行更多图片
更多
友情链接
兰亭集智   国之画   百度统计   站长统计   阿里云   chrome插件   新版天听网
关于我们 - 联系我们 - 留言反馈
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码！