移植 jq

标签：

关于 jq 工具请参考 http://blog.csdn.net/u011641885/article/details/45559031

jq 源码下载：

git clone https://github.com/stedolan/jq.git

cd jq
autoreconf -i
CC=i486-openwrt-linux-gcc ./configure --disable-maintainer-mode  --host=mipsel-linux --build=i686-linux --prefix=${PWD}/_install/
make
sudo make install

编译完成之后将安装目录下的 执行文件 拷贝到目标主机即可

configure.ac:14: installing 'config/ar-lib'
configure.ac:14: installing 'config/compile'
configure.ac:12: installing 'config/install-sh'
configure.ac:12: installing 'config/missing'
Makefile.am:47: error: Libtool library used but 'LIBTOOL' is undefined
Makefile.am:47:   The usual way to define 'LIBTOOL' is to add 'LT_INIT'
Makefile.am:47:   to 'configure.ac' and run 'aclocal' and 'autoconf' again.
Makefile.am:47:   If 'LT_INIT' is in 'configure.ac', make sure
Makefile.am:47:   its definition is in aclocal's search path.
Makefile.am: installing 'config/depcomp'
configure.ac: installing 'config/ylwrap'
parallel-tests: installing 'config/test-driver'
autoreconf: automake failed with exit status: 1

后来发现是没有安装 libtool 

sudo apt-get install libtool

移植 jq

标签：

原文地址：http://blog.csdn.net/u011641885/article/details/48130869